Pasadena Oak edgebanding 3mm provides a matching edge treatment in a Pasadena Oak design, so cabinet and furniture panels finish with a consistent look from face to edge. The 3mm thick profile gives the edge a substantial, furniture-grade appearance that stands out clearly compared with thinner tapes during installation and inspection. With a 15/16 inch width sized for common panel thicknesses, the banding covers the edge and slight overhang in one pass, simplifying trimming and keeping the work moving. The 300 ft length supports longer production runs or multiple jobs from a single roll, reducing changeouts during casework or fixture production. As PVC edgebanding, it is part of the Edgebanding & Surfacing product offering, so it fits naturally into standard shop workflows where matching edge treatments are required on laminated or surfaced panels.
The 3mm thickness of this Pasadena Oak edgebanding gives installers enough material to trim flush without tearing through the surface, which helps keep edges straight and smooth across long cabinet runs. Its 15/16 inch width provides coverage for common board thicknesses while still allowing controlled trimming on both faces, which supports tight reveals on doors, drawer fronts, and casework sides. At 300 ft per roll, crews can set up once and move through a sequence of panels with consistent feed settings, rather than interrupting the process mid-job. As a PVC Edgebanding & Surfacing product, it fits into shops already working with similar materials, so the banding behaves predictably with standard edge-banding machinery or manual application workflows.
This Pasadena Oak edgebanding, at 3mm thick and 15/16 inch wide, fits edge treatment needs on casework, cabinetry, and furniture components where a Pasadena Oak appearance is specified. The thickness works well on doors, drawer fronts, and exposed shelving, where a more substantial edge line is desired to visually match the scale of the panel. Because it is supplied in a 300 ft length, it supports multi-cabinet installations and longer fixture runs from a single roll, which benefits shops handling kitchens, office systems, or similar projects in Pasadena Oak. Being part of the Edgebanding, PVC class, the material aligns with common PVC-faced or laminated panels used in commercial and residential woodworking.
The defined 3mm thickness and 15/16 inch width give installers clear setup parameters for trimmers and edge-banding machines, which reduces trial-and-error and helps repeat consistent edges from the first piece to the last. The 300 ft roll length lets shops plan coverage per job more predictably, aligning takeoffs with actual linear footage along cabinet sides, tops, and fronts. Identifying the product as Rehau, Inc. Pasadena Oak edgebanding with Manufacturer Part 301383-256 gives purchasing and shop teams a precise reference for reordering or matching previous work, which supports consistent finishes across phases of a project. The classification under Edgebanding & Surfacing and the description as Edge Banding point directly to its role as the final edge treatment on panels, helping crews assign it correctly in cut lists, machining steps, and finishing sequences.
This Pasadena Oak edgebanding is 3mm thick and 15/16 inch wide, which supports full coverage of typical panel edges while leaving enough material for clean trimming on both faces.
The edgebanding is supplied in a 300 ft length, which provides extended coverage across multiple cabinets or furniture pieces before a new roll is needed in production.
The product is classified as Edgebanding, PVC within the Edgebanding & Surfacing category, which aligns it with standard PVC edge band materials used in woodworking shops.
This Pasadena Oak edgebanding is supplied under the Rehau, Inc. brand, giving shops a clear source reference for matching existing Rehau Pasadena Oak installations.
Manufacturer Part 301383-256 specifically identifies this 3mm thick, 15/16 inch wide, 300 ft Pasadena Oak edgebanding, which helps purchasing and production teams match the exact product.
The 3mm thickness gives each edge a more substantial profile, which supports a furniture-grade look and provides enough material for precise trimming and clean lines.
Choosing this Pasadena Oak edgebanding 3mm, in a 15/16 inch width and 300 ft length, ties your panel edges directly to a defined Pasadena Oak design and format. The Rehau, Inc. identity and Manufacturer Part 301383-256 give purchasing and shop teams an exact reference for repeat orders on ongoing cabinet, casework, or furniture programs. Adding it to your next cut list keeps edge treatment aligned with the Edgebanding & Surfacing materials already specified on the job.
Sold In: 1 Roll