Edgebanding PVC Natural Maple defines this product as a PVC edge banding in a Natural Maple color, so it finishes exposed edges to visually match Natural Maple panels in cabinet and furniture work. The 1-5/16 inch width covers typical board thicknesses while giving a bit of latitude on either side, which helps installers trim back to a crisp, straight line. The .020 inch thickness sets a consistent, modest edge profile, which keeps the edge low-profile while still masking core material. The 600 FT length is suited to larger runs or repeated jobs, so shops can run multiple cabinets or casework pieces from a single roll. The PVC material establishes it as a thermoplastic edge solution, which supports standard PVC edgebanding workflows in production or serious DIY shops.
The 1-5/16 inch width on this edge banding defines how it sits on the panel edge, giving room to position the banding accurately and trim both faces without exposing the core. The .020 inch thickness sets the banding as a thin, manageable layer, which works well in standard edge banding operations where controlled heat and pressure are used. The 600 FT length determines how often rolls need to be swapped during runs, which supports longer uninterrupted edging sessions on cabinets, shelves, and panels. The PVC material designation keeps the workflow aligned with other PVC edgebanding in the shop, so setups tuned for PVC material behavior can be applied to this Natural Maple banding.
This edge banding is identified as Edgebanding, PVC, Natural Maple, so it is oriented toward finishing exposed edges on panels that share a Natural Maple look. The 1-5/16 inch width positions it for use on common cabinet and furniture panel thicknesses, where that extra width helps cover slight dimensional variations before trimming. The .020 inch thickness supports edges on doors, drawer fronts, shelving, and case sides where installers want a low-profile transition from face to edge. The 600 FT roll length supports use across full kitchen jobs, commercial millwork runs, or multiple smaller projects, allowing the same Natural Maple appearance to be carried through all visible edges.
The .020 inch thickness defines a specific edge build that balances coverage and subtlety, which helps edges feel consistent to the touch while still hiding core material on veneered or laminated panels. This thin PVC layer is easier to flush-trim back to the panel surface, which supports smooth transitions when working along long cabinet runs or tall panels. The 600 FT length concentrates a large amount of edging into one roll, which reduces interruptions on repetitive cuts and edgebanding passes. The Natural Maple color definition keeps the banding visually aligned on every edge over that entire roll length, which matters when matching a series of cabinets, panels, or fixtures under the same finish scheme.
This edge banding is 1-5/16 inch wide, so it covers standard panel thicknesses with extra material for trimming to a clean finished edge.
This Rehau PVC edgebanding is .020 inch thick, giving a thin, low-profile edge layer that still hides the panel core effectively.
This PVC edge banding roll is 600 FT long, which supports longer production runs or multiple projects from a single roll.
The 301684-582 edge banding is made from PVC, aligning it with standard PVC edgebanding processes used in many woodworking shops.
This Rehau PVC edgebanding is specified as Natural Maple, matching projects that use Natural Maple tones on cabinet and furniture surfaces.
Manufacturer Part 301684-582 identifies this exact Natural Maple PVC edge banding, helping shops reorder the same width, thickness, and color.
This Edgebanding, PVC, Natural Maple .020 inch Thick, 1-5/16 inch Width x 600 FT from Rehau, Inc. combines a defined color, width, thickness, and roll length, so each order can align with planned cabinet and panel runs. The 1-5/16 inch width and .020 inch thickness set predictable edge dimensions that suit common casework. The 600 FT roll length supports extended use under a single part number. Selecting this 301684-582 edge banding through Wurth Baer Supply ties your next run to a consistent Natural Maple PVC edging solution.
Sold In: 1 Roll