Edgebanding PVC Natural Cherry .018 inch Thick, 15/16 inch Width x 600 FT is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges in woodworking projects. The Natural Cherry color provides a coordinated look on exposed edges where a cherry tone is needed, which supports consistent appearance across cabinets, furniture, or casework using similar finishes. The 15/16 inch width gives coverage across common panel thicknesses while allowing some trimming, which helps installers create a tight edge without exposed core material. The .018 inch thickness provides a modest profile that covers the substrate edge, supporting a finished appearance while keeping the edge slim. The 600 FT length supplies a continuous run for larger projects or multiple jobs, which reduces changeovers during edging work and supports efficient shop or site workflows. The product is identified by manufacturer part number 716041-069 for accurate ordering and repeat use.
This edge banding has a 15/16 inch width, which spans standard panel edges with some margin, so installers can align the strip to one face and trim back to the opposite side for a clean edge. The .018 inch thickness provides a thin PVC layer over the substrate edge, so the transition between the face material and the edge is minimized while still covering the raw core. The 600 FT length means one roll supports extended edging runs on cabinets, shelves, or casework, so projects can proceed with consistent Natural Cherry edging across many parts. As a PVC Natural Cherry product in the Edgebanding, PVC category, it fits into typical edgebanding processes where PVC materials are applied to panel edges to achieve a matching or coordinating appearance.
This PVC Natural Cherry .018 inch Thick, 15/16 inch Width x 600 FT edge banding is intended for covering panel edges in woodworking applications where a cherry-tone edge is needed. In cabinet shops or furniture production using cherry-look surfaces, the Natural Cherry color helps align the edge tone with the faces for a coordinated appearance on doors, drawer fronts, shelves, and casework components. The 15/16 inch width works along the length of common panel edges, so long cabinet sides or tall pantry panels can be edged with a continuous strip taken from the 600 FT roll. Because it is classified under Edgebanding & Surfacing and Edgebanding, PVC, it fits into workflows where PVC materials are chosen for edge treatment on composite or engineered panels.
The .018 inch thickness of this Rehau, Inc. edge banding gives a thin but complete cover over the panel edge, so after trimming, the edge sits close to flush with the panel faces, helping reduce noticeable steps at the edge line. The 15/16 inch width offers extra material beyond typical panel thickness, so there is room to position the banding and then trim back both faces, which supports accurate, repeatable edges along an entire run. With a 600 FT length, a single roll can serve a sequence of doors, drawer fronts, or case parts, maintaining the same Natural Cherry tone from part to part. The manufacturer part number 716041-069 clearly identifies this specific Natural Cherry PVC edging, supporting repeatable selection when projects call for the same edge appearance and dimensions on future jobs.
This Rehau, Inc. edge banding is .018 inch thick, 15/16 inch wide, and 600 FT long, which suits covering panel edges with trim allowance for consistent finished edges.
The edge banding is PVC in a Natural Cherry color, which provides a cherry-toned surface on panel edges to coordinate with similar finishes on cabinets or furniture.
The .018 inch PVC thickness creates a slim layer over the edge, so after trimming, the transition from panel face to edge stays low and visually neat.
The 15/16 inch width spans common panel edges with extra material, allowing alignment to one face and trimming back for clean, flush edges on both sides.
The 600 FT length supports larger cabinet, furniture, or casework runs by providing a continuous supply of Natural Cherry PVC edging across many parts.
This PVC Natural Cherry edge banding is identified as Rehau, Inc. manufacturer part number 716041-069, which helps match the same product on repeat orders.
This Edgebanding PVC Natural Cherry .018 inch Thick, 15/16 inch Width x 600 FT from Rehau, Inc. offers a cherry-toned PVC surface, specific thickness, and generous roll length, which support consistent, repeatable edge treatment on cabinets, furniture, or casework. For jobs calling for Natural Cherry edges with a thin PVC profile and standard-width coverage, this 716041-069 edge banding provides defined dimensions and color to match planning and production needs.
Sold In: 1 Roll