Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Glamour Cherry bullnose is a laminate edge molding that finishes exposed edges on laminate projects while carrying the same decorative look around the perimeter. The 6208-43 Glamour Cherry color in Artisan Finish creates a coordinated edge that visually connects with matching laminate surfaces, which helps projects read as one continuous top instead of a field with a separate trim piece. The 1-1/2 inch height gives coverage for standard countertop and work surface build-ups, so the laminate face and substrate edge are protected in one step. This molding is part of the Laminate Edge Moldings category, so it is designed to work with laminate-based tops in shops that already fabricate with sheet laminate. The IdealEdge design gives a shaped bullnose profile, which softens the transition at the front edge for a more finished, furniture-like detail.
This Formica Corporation laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so a single color and profile can be used around corners, arcs, and standard runs without switching products. That flexibility lets shops template a variety of layouts while keeping the same Glamour Cherry 43 bullnose detail. The IdealEdge design is intended for use on countertops, islands, desks, and work stations, aligning the molding with common fabrication projects in both residential and commercial work. Formica specifies AFF522 series glue (sold separately), so installers can align their adhesive choice with the edge construction for consistent bonding. The 12 foot length supports typical counter spans and peninsulas, helping reduce seams at field joints.
This Formica IdealEdge 6208-43 Glamour Cherry Artisan Finish bullnose edge molding is designed for laminate countertops, islands, desks, and work stations where an integrated, decorative edge is needed. The color and finish tie directly to Glamour Cherry laminate, so tops and edges can be coordinated using a single visual scheme. In a countertop run, the 1-1/2 inch height gives vertical coverage over standard build-ups, allowing fabricators to cover the substrate edge and present only the decorative Glamour Cherry surface to the user. On islands or peninsulas, the 12 foot length can span longer edges without mid-run joints, which is especially useful when the work surface forms a visual focal point. For desks and work stations, the same bullnose shape provides a comfortable front edge while maintaining the same decorative appearance used on larger counters.
The suitability for straight, curved, clipped, and 90 degree edges means this single bullnose profile can follow outside corners, gentle radius fronts, and clipped corners while maintaining a continuous look. This helps casework shops standardize on one Formica IdealEdge Glamour Cherry bullnose for varied plan shapes across a project. Because the core is moisture barrier MDF, the molding is engineered for environments where tops see regular cleaning and incidental moisture, such as kitchens, break rooms, and office work stations. The 10 year limited warranty, which specifically covers delamination of the edge, supports long-term projects where the bond between the laminate edge and core is a key performance point. When paired with the recommended AFF522 series glue (sold separately), the system is set up so that the adhesive and edge construction are specified together, simplifying material choices for installers.
The Formica IdealEdge Glamour Cherry bullnose is a laminate edge molding designed to finish exposed edges on laminate countertops, islands, desks, and work stations using the 6208-43 Glamour Cherry Artisan Finish.
This Glamour Cherry 43 bullnose edge molding is 144 inches, or 12 feet, long, which allows fabricators to run full-length edges on many countertops and islands with minimal joints.
The IdealEdge laminate molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can follow varying plan shapes around countertops, islands, desks, and work stations.
This Formica IdealEdge piece has a 1-1/2 inch bullnose profile height, giving vertical coverage over typical laminate countertop build-ups while providing a rounded front edge detail.
The edge molding uses a moisture barrier MDF core, which is designed to help resist moisture penetration into the edge in everyday kitchen, break room, and work station environments.
Formica recommends AFF522 series glue (sold separately) as the adhesive for this Glamour Cherry bullnose edge molding, aligning the adhesive choice with the edge construction.
The Formica IdealEdge Glamour Cherry bullnose edge molding from Wurth Baer Supply pairs a 6208-43 Glamour Cherry Artisan Finish surface with a moisture barrier MDF core and 1-1/2 inch profile height, giving fabricators a color-matched, shaped laminate edge for countertops, islands, desks, and work stations. The 12 foot length supports long runs with fewer seams, while suitability for straight, curved, clipped, and 90 degree edges allows one profile to follow varied layouts. For projects calling for coordinated Formica laminate surfaces and a rounded front edge, this laminate edge molding offers a defined specification, from the Manufacturer Part Number 062082043D12000 to the recommended AFF522 series glue (sold separately), ready to be applied into your next laminate top run.
Sold In: 1 Each