Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCWM waste pullout delivers a two-bin trash and recycling setup on a maple carriage with soft-close full-extension slides, designed for a standard base cabinet with door-mount operation.
A single cabinet bay can serve both trash and recycling when the carriage holds two bins side by side. The 4WCWM pulls both bins fully into the open in one motion, so you reach the back bin just as easily as the front one. Door-mount hardware connects the unit to the cabinet door, so opening the door is all it takes to bring the bins forward. For a kitchen doing real volume, two 50-quart bins absorb a significant amount before either one needs to go.
The carriage is built from maple, which holds up under repeated loading and gives the interior of the cabinet a finished, furniture-quality look where most of the competition uses wire or basic sheet goods. The two bins are silver and sized at 50 quarts each. Soft-close slides take over at the end of the return trip, so a loaded carriage settles in quietly rather than rattling back into position. Full extension means the slides carry the bins all the way out, not just partway.
The 4WCWM is sized for a standard base cabinet in a kitchen renovation or new-build where a dedicated waste center is part of the plan. Cabinet shops specifying pullouts for custom kitchens will find the maple carriage a natural match alongside wood-box drawer systems. Designers working on a kitchen where the hardware inside the cabinet should look as considered as what is outside it will appreciate the maple over a painted metal alternative. Measure the cabinet opening against the minimums before ordering: 21 inches wide, 25 inches high, and 22-1/8 inches deep. The bins and lids ship with the unit; a door-mount bracket is included for connecting to the cabinet door.
Yes. Both 50-quart silver bins ship with the carriage as part of this SKU.
The minimum opening is 21 inches wide, 25 inches high, and 22-1/8 inches deep. Measure before ordering since both the width and height minimums need to be met.
The 4WCWM is a bottom-mount design that works with standard base cabinet installations. Confirm your cabinet opening dimensions against the minimums above regardless of construction type.
A door-mount bracket attaches the carriage to the inside of the cabinet door so the unit rolls out when you open the door. The bracket is included with this unit.
The maple carriage, soft-close full-extension slides, and two 50-quart silver bins make this pullout a complete waste and recycling solution for a kitchen base cabinet that is meant to work hard and look right doing it.
Sold In: 1 Each
