Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf waste pullout gives a full-height base cabinet a built-in way to organize trash and small recycling or compost containers. This bottom mount trash pullout from Rev-A-Shelf is made from natural maple with a semi-gloss finish and mounts to the cabinet floor and door. The unit is designed for a 24 inch full height base cabinet and includes four containers for sorting waste. Two 50 quart waste bins handle main trash volume, while two 8 liter containers support smaller waste streams. The soft-close waste pullout layout helps keep access controlled and quieter in daily kitchen use. Patented pre-assembled door-mount brackets help simplify setup for a door mount waste pullout installation.
Key specs to confirm: This maple waste pullout is designed for 24 inch full height base cabinets and is listed at 20-31/32 inches in the product name, with a SAP description that references 21 inches. Buyers should confirm the actual cabinet opening, interior depth, door style, hinge clearance, and mounting area on the cabinet floor before ordering. Because the unit mounts to the cabinet floor and door, door alignment and internal obstructions matter. The product is compatible with BLUM SERVO-DRIVE Technology using a standard 110V wall socket, sold separately, and with a TIP-ON mechanism, sold separately. Any additional electrical, load, or compliance details should be confirmed with the manufacturer or technical documentation.
What's included: Two 50 quart silver polymer waste containers, one green lid, two 8 liter waste containers, two 8 liter lids with one white and one green, and one removable beauty ring. The pullout also includes patented pre-assembled door-mount brackets.
What to verify before ordering: Confirm your cabinet is a 24 inch full height base cabinet, check that the floor-mount area is clear, verify the door can be mounted to the pullout, and review hinge and pull hardware clearance. Rev-A-Shelf notes that depending on cabinet construction and pull hardware, a lid on the rear waste bin may not fully function.
A bottom mount trash pullout like this is built for kitchens where open floor space matters and loose bins are hard to manage. If you are replacing freestanding trash cans with a cleaner cabinet-based setup, this Rev-A-Shelf trash pullout creates one access point for main trash plus smaller separated waste. The two 50 quart waste bins support higher-volume daily use, while the two 8 liter containers can be assigned to compost, bags, or small-item sorting.
This arrangement is useful for remodelers, cabinet installers, and serious DIY buyers working on a 24 inch full height base cabinet. Because the frame mounts to the cabinet floor and door, the door opens the pullout directly. That can make routine use simpler than reaching behind a hinged door for loose containers. The natural maple frame with semi-gloss finish also fits projects where visible cabinet interior parts matter.
The included lids and removable beauty ring give buyers more flexibility in how they separate waste. One practical point is worth checking before purchase: Rev-A-Shelf states that depending on cabinet construction and pull hardware, a lid on the rear waste bin may not fully function. That means buyers should inspect internal clearances and door hardware before ordering, especially in tighter cabinet layouts. If you plan to use this as a door mount waste pullout with touch-open or powered assistance, confirm the separate BLUM SERVO-DRIVE or TIP-ON components and required setup details in advance.
For many kitchens, a soft-close waste pullout helps reduce abrupt movement during open and close cycles. That can matter in homes where the trash cabinet gets frequent use throughout the day. If your goal is a kitchen cabinet trash pull out that supports sorting without adding another cabinet accessory, this four-container format is a practical way to keep trash, recycling, or compost grouped in one cabinet zone.
When buyers compare a cabinet trash pullout, the most important differences are usually mounting style, cabinet fit, container layout, and included hardware. This Rev-A-Shelf waste pullout is clearly positioned as a bottom-mounted, door-mounted unit for a 24 inch full height base cabinet. That matters because not every pullout uses the same mounting method or cabinet target.
Another point of comparison is how the waste capacity is divided. Some pullouts focus only on one or two large bins. This model combines two 50 quart waste bins with two smaller 8 liter containers, which may suit kitchens that need both general trash space and a dedicated spot for smaller waste streams. Included lids and the removable beauty ring also help define what arrives with the product, so buyers can compare package contents instead of assuming accessories are included.
Material choice can also affect the buying decision. This unit uses natural maple construction with a semi-gloss finish rather than a plain wire frame or an unspecified cabinet insert style. Buyers who want a wood-framed pullout can weigh that against their cabinet interior design and installation preference. The patented pre-assembled door-mount brackets are another practical comparison point because they relate directly to setup and alignment. Rather than focusing only on appearance, compare cabinet opening requirements, floor mounting area, door attachment method, and whether your hinge and pull hardware leave enough room for the rear lid to function as intended.
This cabinet trash pullout is designed for 24 inch full height base cabinets. Buyers should still confirm opening size, interior depth, and hinge clearance before ordering.
This Rev-A-Shelf waste pullout includes two 50 quart silver polymer waste containers and two 8 liter waste containers.
This bottom mount trash pullout mounts to the cabinet floor and door, so the pullout moves with the cabinet door.
This waste pullout includes one green lid, plus two 8 liter lids, one white and one green.
Rev-A-Shelf notes that cabinet construction and pull hardware can prevent the rear waste bin lid from fully functioning. Buyers should verify clearance.
This soft-close waste pullout is identified as a soft-close model in the verified product data.
This kitchen cabinet trash pull out is compatible with BLUM SERVO-DRIVE Technology, which is sold separately and uses a standard 110V wall socket.
This Rev-A-Shelf trash pullout is compatible with a TIP-ON mechanism, which is sold separately.
This waste pullout requires cabinet floor space, door mounting alignment, and clearance around hinges and pulls. Follow manufacturer installation guidance and local building requirements where applicable.
This maple waste pullout uses natural maple construction with a semi-gloss finish.
Soft-close waste pullout selection starts with cabinet fit, mounting style, and included containers. This Rev-A-Shelf unit is made for a 24 inch full height base cabinet and includes two 50 quart bins, two 8 liter containers, lids, and a removable beauty ring. Before purchase, confirm your cabinet opening, floor-mount area, door attachment points, and rear lid clearance with your hardware layout. If you plan to add BLUM SERVO-DRIVE or TIP-ON, verify those separate components and installation requirements first.
Sold In: 1 Each
