Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Sahara Noir is a laminate edge molding that finishes exposed countertop and work surface edges with a matching decorative look. The double radius profile creates a smooth front and back transition, which helps eliminate the sharp feel of square laminate edges on frequently used tops. The molding measures 1-1/2 inches high and 144 inches long, so one length spans a 12 foot run and suits many standard residential or commercial counter layouts without seams along shorter stretches. The Sahara Noir design in Artisan finish carries the same pattern and sheen as the laminate, which supports a continuous visual flow from surface to edge. This molding belongs to the Laminate Edge Moldings class, giving a rigid, defined shape that holds its profile during cutting and bonding. A limited 10 year warranty that covers delamination of the edge adds long-term security on permanent installations.
This Formica IdealEdge laminate edge molding is designed for use on straight, curved, clipped, and 90 degree edges, so one profile can carry through varied conditions on a single run. That range lets fabricators handle outside corners, clipped corners, and gentle curves with a consistent visual line. The product is intended for use on countertops, islands, desks, and work stations, covering common laminate fabrication work. A moisture barrier MDF core under the decorative laminate face supports stable gluing and machining, which helps maintain edge contact when trimming flush to the laminate deck. Recommended glue is the AFF522 series (sold separately), aligning the edge with adhesive products formulated for laminate work. Using the same edge molding across tops, islands, and work surfaces simplifies set-up because the cutting and bonding routine stays consistent from piece to piece.
This Sahara Noir Formica IdealEdge laminate edge molding is suited to countertops, islands, desks, and work stations, so it fits both residential and commercial laminate projects built on similar construction methods. The 12 foot length supports island runs and longer straight counters in a single piece, which helps create a continuous line on peninsulas and reception or work counters. Its suitability for straight, curved, clipped, and 90 degree edges means a shop can carry one profile to handle most layout changes around a room, including inside corners and shaped ends on desks. The 1-1/2 inch height pairs well with substrates that need full face coverage, so deeper overhangs or thicker decks can still show a uniform decorative band. In projects using Sahara Noir laminate on horizontal or vertical surfaces, this matching edge molding keeps the color and Artisan finish consistent from top to front face.
The moisture barrier MDF core behind the Sahara Noir laminate skin gives the edge structure during cutting and flushing, which helps maintain a crisp radius while trimming to the deck. That construction supports dependable bond lines when paired with the recommended AFF522 series glue (sold separately), allowing the adhesive to work within a stable, uniform substrate. The double radius profile shapes both top and bottom corners of the exposed edge, which helps reduce chipping risk at sharp corners during normal use. Its 1-1/2 inch height gives extra coverage compared to narrower edge strips, which helps hide irregularities at the substrate edge and any slight mismatch between deck and build-up. The 10 year limited warranty that covers delamination of the edge reflects the product design focus on secure bonding, offering long-term reassurance once tops, islands, or work stations are installed and in daily service.
The Formica IdealEdge Sahara Noir molding measures 1-1/2 inches high and 144 inches long, so it spans a 12 foot run and provides full edge coverage on many standard countertops.
The Sahara Noir IdealEdge molding is for use on countertops, islands, desks, and work stations, so it suits laminate projects across kitchens, offices, and workrooms.
This Formica IdealEdge Sahara Noir profile is suitable for straight, curved, clipped, and 90 degree edges, allowing one molding type to run through varied layouts.
The IdealEdge Sahara Noir molding uses a moisture barrier MDF core, which supports the laminate face and promotes stable bonding in typical countertop environments.
The product data recommends AFF522 series glue (sold separately) for the Sahara Noir IdealEdge, aligning the edge with adhesive formulated for laminate applications.
This Formica IdealEdge Sahara Noir edge molding carries a 10 year limited warranty that covers delamination of the edge, supporting confidence in long-term bond performance.
The Formica IdealEdge 9921-43 Sahara Noir Artisan finish double radius edge molding offers a coordinated way to finish countertops, islands, desks, and work stations using the same pattern from surface to edge. Its 1-1/2 inch height, 12 foot length, and moisture barrier MDF core provide practical coverage and stability for laminate fabrication. The ability to handle straight, curved, clipped, and 90 degree edges with one profile keeps shop setups consistent across a project. Matching this edge molding to Sahara Noir laminate keeps the visual line tight from deck to front face. For laminate jobs that call for Formica IdealEdge Sahara Noir, this molding delivers the dimensions, profile, and construction needed for clean, continuous edge treatment.
Sold In: 1 Each