Description
HKI Pre-Milled MDF 600x450x19mm For Lift Systems
HKI pre-milled MDF 600x450x19mm describes a Blum AVENTOS HKi raw pre-milled MDF board designed at 600 x 450 x 19 mm, so you get a defined work surface size ready to integrate into lift system layouts where those dimensions are specified. This 600mm pre-milled raw MDF board set in natural finish is identified as a 600mm Pre-Milled 2 Raw Board Set, Natural, which ties the kit directly to projects needing two matching panels in that stated size. The board is part of the BLUM Aventos Lift Systems product class, so it is suited to applications where AVENTOS hardware is used to move or support a front or work panel within a lift solution. The product is supplied under Blum, Inc. branding, so it matches projects standardizing on Blum AVENTOS HKi layouts and helps keep hardware and panel elements aligned to one manufacturer family for consistent planning.
Key Raw MDF Panel Details For Projects
- This Blum AVENTOS HKi raw pre-milled MDF board is specified at 600 x 450 x 19 mm, giving a defined panel footprint that simplifies layout in cabinets or work areas built around that size.
- The description as a 600mm Pre-Milled 2 Raw Board Set, Natural indicates a matched pair of raw boards, letting you plan for left and right or upper and lower elements using the same stated dimensions.
- Placement in the BLUM Aventos Lift Systems product class links the panel to lift system use, so the geometry is tuned to typical AVENTOS HKi applications where controlled motion of a front or work surface is required.
- Branding as Blum, Inc. aligns the board with Blum AVENTOS lift system components, which supports coordinated selection when fronts and lift hardware are specified from the same manufacturer family.
Pre-Milled MDF Dimensions Supporting Lift Layout
This HKI pre-milled MDF 600x450x19mm panel uses the 600 x 450 x 19 mm format defined in the product data, so installers can set out cabinet or lift front openings that correspond to that footprint. The pre-milled MDF designation indicates that machining has been considered in advance for AVENTOS HKi use, so the panel works with layouts where milling for that system is expected instead of starting from an unprepared blank. Being described as a raw pre-milled MDF board keeps the surface in a natural state, allowing finishing steps to be aligned to the rest of the project after fitting. The 19 mm thickness noted in the SAP description, HKI PRE-MILLED MDF 600X450X19MM, gives a stable body that suits applications where lift hardware engages a consistent and known panel thickness.
Using This Blum Aventos HKi Raw MDF Board
Where This Pre-Milled MDF Board Is Applied
The Blum Aventos HKi raw pre-milled MDF board, 600 x 450 x 19 mm, sits within the BLUM Aventos Lift Systems category, so it is intended for situations where a lift mechanism moves or holds a panel of those dimensions. The 600mm Pre-Milled 2 Raw Board Set, Natural description pairs the size with a natural MDF surface, so projects using AVENTOS HKi can adopt these panels as fronts or work elements that match the hardware family while leaving color and final finish open. The 600 x 450 format aligns with the HKI PRE-MILLED MDF 600X450X19MM SAP description, helping designers treat this board as a defined module when mapping out cabinetry that integrates lift systems around those measurements. Because the board is grouped with work surface and lift system products, it fits environments where a moving front or section of work surface must stay within a known width and height during operation.
Why These Specific MDF Details Support Results
The stated 600 x 450 x 19 mm dimension on this HKI pre-milled MDF 600x450x19mm panel gives trades a predictable blank that matches drawings or cut lists calling out that exact size in AVENTOS HKi-based work. When a project specifies a Blum Aventos HKi pre-milled MDF board, using this 600mm Pre-Milled 2 Raw Board Set, Natural keeps the thickness and proportions aligned with Blum expectations, supporting repeatable fitting of lift components around the panel. The raw pre-milled MDF designation means the board arrives with milling for the AVENTOS HKi context defined at the manufacturing stage, reducing layout steps compared with working a generic MDF sheet to the HKI PRE-MILLED MDF 600X450X19MM geometry. As part of the BLUM Aventos Lift Systems class, this Blum 06883114 MDF board ties into a known system of lift hardware and work surface planning, so the panel becomes one more specified element in a coordinated Blum, Inc. project rather than an arbitrary cut-to-size part.
Common Questions About This Blum MDF Board
What does HKI PRE-MILLED MDF 600X450X19MM describe?
HKI PRE-MILLED MDF 600X450X19MM describes a Blum AVENTOS HKi raw pre-milled MDF board sized 600 x 450 x 19 mm, giving a defined panel format tailored to that lift system context.
How does the 600 x 450 x 19 mm size help planning?
The 600 x 450 x 19 mm size lets designers and installers base cabinet openings and lift fronts on a known panel footprint that aligns with the specified Blum Aventos HKi geometry.
What role does this board have in Blum Aventos lift systems?
The board belongs to the BLUM Aventos Lift Systems class, so it functions as a front or work surface element sized for use alongside AVENTOS HKi lift hardware layouts.
Why is this MDF board described as raw pre-milled?
The board is described as raw pre-milled because it is an MDF panel prepared in advance for AVENTOS HKi use while keeping the natural surface ready for project-specific finishing.
How does the 19 mm thickness relate to lift applications?
The 19 mm thickness aligns with the HKI PRE-MILLED MDF 600X450X19MM specification, giving a consistent panel body that suits lift hardware engagement designed for that thickness.
What does the 600mm Pre-Milled 2 Raw Board Set, Natural name indicate?
The 600mm Pre-Milled 2 Raw Board Set, Natural name indicates a natural MDF set at 600 x 450 x 19 mm, suited to layouts that call for two matching Blum Aventos HKi panels.
Selecting This MDF Board For Blum Aventos Use
The HKI pre-milled MDF 600x450x19mm panel from Blum, Inc. provides a 600 x 450 x 19 mm raw MDF format positioned within the BLUM Aventos Lift Systems family, so it fits projects designed around AVENTOS HKi motion. Using this 600mm Pre-Milled 2 Raw Board Set, Natural through Wurth Baer Supply connects your work surface or lift front planning directly to the SAP-described HKI PRE-MILLED MDF 600X450X19MM spec. For jobs built on Blum Aventos HKi layouts, this defined board size helps translate drawings calling for that geometry into a ready-to-use MDF solution without additional size interpretation.