Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge River Gold bullnose edge molding is a laminate edge molding designed to give a finished look on all sides, so countertops, islands, desks, and work stations present a continuous, professional appearance. The 3546-ML River Gold design with Monolith finish delivers an integrated edge solution that matches Formica laminate surfaces for a coordinated installation. A 1-1/2 inch height aligns with common top build-ups, helping installers create a consistent edge reveal from end to end. The 144 inch (12 foot) length spans long runs, reducing joints that can interrupt the visual line. A moisture barrier MDF core supports the laminate face, helping the edge perform in typical countertop and work surface environments. This laminate edge molding works on straight, curved, clipped, and 90 degree edges, so a single profile can handle varied layout conditions on the same project.
This Formica IdealEdge laminate edge molding uses a moisture barrier MDF core, which is designed for glue-bonded laminate applications where a stable substrate supports a clean edge profile. The 1-1/2 inch height and 12 foot length allow fabricators to size and cut pieces to match specific countertop, island, desk, or work station runs. Formica recommends AFF522 series glue (sold separately) for this edge, providing a named adhesive family that aligns with the MDF core and laminate construction. Suitable use on straight, curved, clipped, and 90 degree edges means installers can shape and fit the molding around inside and outside corners without changing profiles, supporting an efficient fabrication workflow on mixed-layout projects.
This Formica IdealEdge 3546-ML bullnose edge molding is specified for countertops, islands, desks, and work stations, so it fits typical residential and commercial laminate work surfaces. The River Gold pattern with Monolith finish ties directly into Formica laminate offerings, allowing the edge treatment to visually coordinate with matching or complementary tops. Because it is suitable for straight, curved, clipped, and 90 degree edges, a single bullnose profile can run around peninsulas, island corners, and return legs, which simplifies planning and reduces profile changes. The 1-1/2 inch height supports common build-ups on laminate tops, giving consistent bullnose coverage at the front and ends of work surfaces.
The moisture barrier MDF core in this laminate edge molding is engineered to work with laminate glues, so the bullnose profile has a stable base for bonding and shaping during fabrication. At 144 inches long, each piece can span long runs on countertops or work stations, reducing the number of joints that need to be aligned and finished. The bullnose shape delivers a rounded front edge, and the finished look on all sides means exposed ends present a complete, decorative surface rather than a raw substrate. The 10 year limited warranty covering delamination of the edge signals defined performance expectations for the bonded assembly over time on installed tops. Recommended use with AFF522 series glue (sold separately) ties adhesive choice directly to the Formica system, supporting predictable bonding behavior on moisture barrier MDF cores in everyday shop conditions.
The Formica IdealEdge River Gold bullnose is a laminate edge molding with a bullnose profile, used to give a finished look on all sides of countertops, islands, desks, and work stations.
This laminate edge molding is intended for countertops, islands, desks, and work stations, so it fits typical laminate work surface applications in kitchens, offices, and similar spaces.
This IdealEdge bullnose is suitable for straight, curved, clipped, and 90 degree edges, allowing installers to run one profile around corners, radiused ends, and linear sections.
This River Gold edge molding measures 1-1/2 inches in height and 144 inches in length, so it covers standard build-ups and spans long runs with fewer joints.
This laminate edge uses a moisture barrier MDF core, which supports laminate bonding and helps the edge perform in normal countertop and work station environments.
This IdealEdge molding is recommended for use with AFF522 series glue, sold separately, aligning the adhesive choice with the moisture barrier MDF core and laminate construction.
The Formica IdealEdge River Gold bullnose edge molding pairs a 1-1/2 inch profile height with a 144 inch length, so it adapts well to common laminate top constructions and long runs. Suitability for straight, curved, clipped, and 90 degree edges lets one profile handle varied layout conditions around countertops, islands, desks, and work stations. The River Gold design in Monolith finish coordinates with Formica laminate selections, supporting cohesive installations. For projects calling for a laminate edge molding with a moisture barrier MDF core and a 10 year limited warranty covering delamination of the edge, this IdealEdge bullnose provides a defined, system-based option.
Sold In: 1 Each