Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 3700-11 White Alabaster gives laminate countertops and work surfaces a continuous bullnose edge, so the exposed front edge reads as a finished molding instead of a raw laminate line. The satin touch finish provides a smooth surface that visually matches Formica White Alabaster Satin Touch laminate, which keeps color and sheen consistent across the top and edge in the finished job. This laminate edge molding is built on an MDF core, creating a stable substrate that cuts and shapes predictably during fabrication. The profile height of 1-1/2 inches covers standard laminate build-ups, which helps conceal the substrate stack and any minor inconsistencies at the edge. The 144 inch, or 12 foot, length runs the full front of most kitchen and commercial counters in a single piece, reducing seams that can break up the visual line on long installs.
This Formica IdealEdge bullnose molding is designed as laminate edge molding, so it integrates into standard laminate fabrication workflows for countertops and work surfaces. The 1-1/2 inch profile height provides enough material to flush-trim back to the laminate face, which supports a clean line where the bullnose meets the deck. The 12 foot length works well for typical kitchen counters, islands, and longer desks, giving fabricators flexibility to run a single continuous piece along the front edge. The MDF core machines smoothly with common shop tools used for laminate work, helping maintain consistent radiuses and edges along straight and curved sections. Using the recommended AFF522 series glue, sold separately, ties the bond to an adhesive referenced in the product data, which supports dependable adhesion between the laminate bullnose and the substrate during everyday use.
This laminate edge molding is specified for countertops, islands, desks, and work stations, so it fits projects where laminate tops need a finished bullnose front edge. In kitchen layouts, the 12 foot length helps span full counter runs in one piece, maintaining an unbroken front profile from wall to corner or around an island. On commercial desks and work stations, the ability to handle straight, curved, clipped, and 90 degree edges means the same White Alabaster bullnose look can follow ergonomic curves, returns, and corner transitions. The White Alabaster Satin Touch finish ties into Formica laminate of the same design, so the edge and deck present as a coordinated surface rather than a separate trim component. The MDF core supports these applications by offering a consistent, dense base under the laminate, which is useful when routing profile transitions on custom layouts.
The suitability for straight, curved, clipped, and 90 degree edges means fabricators can plan one bullnose edge treatment around the entire perimeter, reducing the need to mix profiles or cut improvised transitions. The 1-1/2 inch and 1-1/4 inch profile options, as referenced in the description, give room to match different build-up heights, which helps keep the laminate deck and bullnose flush after trimming. The moisture barrier built into this IdealEdge molding focuses protection at the edge zone, where liquids from sinks, beverages, or cleaning can sit and stress the laminate bond. The 10 year limited warranty that covers delamination of the edge underscores long-term performance of this bond in normal use, which is important on heavily used counters and work stations. Using the recommended AFF522 series glue, sold separately, aligns adhesive selection with the product specification, supporting predictable bonding behavior during fabrication and service.
Formica IdealEdge 3700-11 White Alabaster molding is 144 inches, or 12 feet, long, which allows most countertop, island, or work station front edges to be run in a single continuous piece.
This IdealEdge bullnose is suitable for straight, curved, clipped, and 90 degree edges, so it can follow corners and gentle radiuses around countertops, islands, desks, and work stations.
The IdealEdge White Alabaster bullnose is listed with a 1-1/2 inch profile, and the description also notes 1-1/2 and 1-1/4 inch profile, supporting different laminate build-up heights.
This Formica laminate edge molding has an MDF core, which machines predictably and supports routing and trimming during fabrication of countertops and work surfaces.
This IdealEdge White Alabaster bullnose includes a moisture barrier, focusing protection at the edge area where spills and cleaning liquids commonly contact the laminate edge.
The recommended glue for this Formica IdealEdge bullnose is the AFF522 series, sold separately, aligning installation with the adhesive specified in the product information.
This Formica IdealEdge 3700-11 White Alabaster Satin Touch bullnose offers a laminate edge molding that matches Formica White Alabaster tops in both color and sheen. The 12 foot length, MDF core, and moisture barrier support long, clean runs on countertops, islands, desks, and work stations. With suitability for straight, curved, clipped, and 90 degree edges, it lets one product carry the bullnose look around the full perimeter. For projects requiring a finished laminate front edge with covered substrate and a 10 year limited warranty that covers delamination of the edge, this IdealEdge molding is a practical choice.
Sold In: 1 Each