Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Patine Concrete bullnose is a laminate edge molding designed to give laminate countertops, islands, desks, and work stations a finished, furniture-like front. This molding uses the Formica IdealEdge laminate construction, so the face presents the Patine Concrete 3706-58 matte finish, creating visual continuity with a matching Formica surface where that pattern is used. The 1-1/2 inch height gives coverage for standard countertop edge builds, helping hide the substrate and cut line while presenting a smooth bullnose profile to users. At 144 inches in length, each stick spans long runs on countertops or islands, reducing seams along the front edge. The matte finish helps reduce reflective glare on working surfaces, which keeps the look consistent with Formica matte laminates in the same space.
This Formica IdealEdge bullnose edge molding is built on a moisture barrier MDF core, so installers work with a machinable substrate that behaves predictably when trimming and fitting to laminate builds. The 1-1/2 inch height is sized for typical countertop edge structures, simplifying layout when aligning the bullnose with the laminated deck. Formica recommends AFF522 series glue for this product, so bond strength and cure characteristics are tuned to the laminate edge and MDF core combination. The 12 foot length lets installers run the molding along a full counter or island side, then cut to final size on site, which keeps the Patine Concrete pattern running continuously along the front edge.
This laminate edge molding is specified for countertops, islands, desks, and work stations, so it is suited to high-contact horizontal applications where a clean front edge matters. The bullnose profile changes a raw laminate edge into a rounded, user-friendly interface, which is important wherever people sit or stand close to the surface. Because it is suitable for straight, curved, clipped, and 90 degree edges, a single pattern of Formica IdealEdge can run around corners and follow gentle curves on reception tops or peninsula counters. The 12 foot length means a long island or run of desks can often be handled with a single piece per side, providing a continuous Patine Concrete presentation without multiple short segments. Using the matching 3706-58 Patine Concrete matte finish lets the edge read as an extension of the surface pattern rather than a contrasting strip. The moisture barrier MDF core supports routing and fine fitting at inside or outside corners, which helps the profile track accurately around the layout.
The Formica IdealEdge bullnose configuration manages the transition from deck to front edge, using its 1-1/2 inch profile to cover the build-up while presenting a smooth radius to the user. The moisture barrier MDF core stabilizes the laminate and glue line, which helps the edge stay bonded when exposed to normal moisture from cleaning or day-to-day use on work stations. Recommended AFF522 series glue is formulated for this substrate and laminate combination, which supports a uniform bond along the full 144 inch length when applied correctly. Because the molding is suitable for straight, curved, clipped, and 90 degree edges, an installer can plan one continuous run around an outside corner or along a slight curve, reducing the number of joints that must be visually aligned. The matte finish Patine Concrete 3706-58 surface keeps the edge appearance consistent with matte countertops in the same pattern, which gives finished installations a unified look across horizontal and vertical meeting lines.
This Formica IdealEdge molding is designed for countertops, islands, desks, and work stations, so it targets horizontal work surfaces where a finished laminate front edge is required.
This Patine Concrete edge molding has a bullnose profile and a 1-1/2 inch height, which together provide a rounded, substantial front edge on standard laminate build-ups.
Each Formica IdealEdge Patine Concrete bullnose molding is 144 inches long, allowing extended runs on countertops or islands with fewer front-edge joints to align.
This laminate edge molding uses a moisture barrier MDF core, which provides a stable base for bonding and machining in typical countertop and work station environments.
This Formica IdealEdge molding is recommended for use with AFF522 series glue, so adhesive properties align with the laminate and moisture barrier MDF core.
This Formica edge provides the 3706-58 Patine Concrete matte finish, giving the bullnose a consistent appearance with matching Formica matte laminate surfaces.
The Formica IdealEdge Patine Concrete bullnose edge molding combines a 1-1/2 inch profile, 12 foot length, and moisture barrier MDF core to deliver a continuous, rounded front on countertops, islands, desks, and work stations. The 3706-58 Patine Concrete matte finish keeps the edge visually aligned with matching laminate tops, especially where a consistent, low-glare appearance is important. Using the recommended AFF522 series glue supports a bond suited to this laminate edge system. For projects calling for a finished bullnose front in the Patine Concrete pattern, this Formica IdealEdge molding provides the pattern, size, and construction needed to complete the run.
Sold In: 1 Each