Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Patine Concrete defines this 3706-58 matte finish waterfall edge molding, so installers get a matched decorative edge that carries the Patine Concrete design right over the edge for a consistent look on laminate projects. This laminate edge molding is identified as Ideal Edge from Formica, which means it is purpose-built to give a finished look on all sides where raw laminate edges would otherwise show. The molding is classified as a laminate edge molding, so it works as the transition between the horizontal surface and the vertical drop on laminate installations. A moisture barrier and MDF core work together in the profile, providing a stable laminate edge solution in typical countertop, desk, and work station environments where daily use can expose edges to bumps and occasional moisture.
This Formica IdealEdge Patine Concrete waterfall edge molding is designed for use on countertops, islands, desks, and work stations, so its dimensions and profile suit common laminate top constructions in these areas. The molding is intended to be bonded using a recommended glue, identified as AFF522 series, so installers can select an adhesive formulation that is specified by the manufacturer for this edge application. The 12 foot length works well for fabrication workflows that favor long, uninterrupted front edges on laminate tops, allowing fabricators to set up cuts and bends to match straight, curved, clipped, or 90 degree edge designs. The moisture barrier and MDF core configuration supports tooling and bonding steps typical in laminate shops, helping maintain edge integrity once the glue cures.
This Formica laminate edge molding in Patine Concrete matte finish is specified for use on countertops, islands, desks, and work stations, so it slots directly into projects built around these horizontal work surfaces. The decorative edge treatment works with straight, curved, clipped, and 90 degree edges, allowing one edge style to follow complex layouts where tops may change direction or radius around corners. With a 1-1/2 inch height, the waterfall profile can drop from the horizontal laminate down the front edge, matching common build-ups used on laminate counters and desks. The 144 inch length suits fabrication of long runs, such as work stations in commercial environments or extended kitchen islands, where keeping the edge continuous helps maintain visual alignment across the span.
The Patine Concrete 3706-58 matte finish on this IdealEdge molding ties directly into matching Formica laminate designs, so the color and pattern can extend seamlessly from the top surface to the front face of the edge. By using a laminate edge molding with a moisture barrier and MDF core, installers get a structure that is engineered for laminate work surface environments, which often see regular contact at the front edge. The 10 year limited warranty covering delamination of the edge adds an extra layer of confidence for long-term installations on these work surfaces.
The Formica IdealEdge waterfall profile being suitable for straight, curved, clipped, and 90 degree edges means that a single edge specification can be applied consistently across multiple segments of the same job, which simplifies planning and layout. Because this edge molding is 12 feet long, fabricators can often run a full counter front or a large desk edge from one piece, which helps maintain a uniform pattern flow along the Patine Concrete design. The MDF core under the laminate face gives a stable base for adhesive bonding with the recommended AFF522 series glue, supporting a solid edge assembly when pressed and cured.
The moisture barrier described for this IdealEdge molding adds a functional layer to the decorative edge, offering added resistance in environments such as countertops, islands, desks, and work stations where occasional spills can reach the front edge. With the 1-1/2 inch height dimension, installers can align this edge with typical laminate build-ups to keep the finished front thickness consistent across sections. The manufacturer part number 037062058F12000 clearly identifies this specific Patine Concrete waterfall profile, which helps shops reorder the exact same edge for future runs or for matching existing installations.
This product is a laminate edge molding in the Formica IdealEdge line, providing a decorative waterfall edge treatment that finishes exposed laminate edges on work surfaces.
This molding is for use on countertops, islands, desks, and work stations, so it fits a range of laminate work surface projects in residential or commercial settings.
This IdealEdge profile is suitable for straight, curved, clipped, and 90 degree edges, which lets one molding style carry through corners and radius sections on the same job.
This edge molding is 1-1/2 inches high and 144 inches long, giving enough length to cover long runs while matching typical front-edge build-ups on laminate tops.
This molding is designed to be bonded with a recommended glue identified as AFF522 series, aligning with Formica guidance for this IdealEdge application.
This Formica IdealEdge molding carries a 10 year limited warranty that covers delamination of the edge, supporting long-term use on laminate work surfaces.
This Formica IdealEdge 3706-58 Patine Concrete matte finish waterfall edge molding delivers a coordinated laminate edge for countertops, islands, desks, and work stations by carrying the Patine Concrete design over the front edge. The 1-1/2 inch height, 144 inch length, and suitability for straight, curved, clipped, and 90 degree edges offer flexibility for fabricators laying out complex tops. With an MDF core, moisture barrier, and a 10 year limited warranty covering edge delamination, this molding aligns well with laminate shop workflows that demand consistent, repeatable results from edge treatments.
Sold In: 1 Each