Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Bianco Antico bullnose is a laminate edge molding that finishes exposed edges on countertops, islands, desks, and work stations, so projects carry the Bianco Antico look cleanly across the full edge instead of stopping at the surface. The 6001-58 Bianco Antico matte finish provides a low-sheen surface, which helps reduce visual glare along the edge line while matching the decorative laminate pattern for a consistent appearance. A 1-1/2 inch height works with many standard top build-ups, allowing the molding to span from deck to underside and cover the edge cleanly on straight runs. The 144 inch, 12 foot length supports long counters and islands in a single piece, which reduces edge seams along the front. The bullnose profile creates a rounded front edge that feels smooth at the hand contact point and softens the transition from horizontal surface to vertical edge.
This IdealEdge laminate edge molding is intended for use on countertops, islands, desks, and work stations, so it is designed to work within common laminate shop workflows for those surface types. The edge molding uses a moisture barrier MDF core beneath the decorative laminate, giving the installer a stable substrate for bonding while maintaining moisture resistance at the edge. Recommended glue is listed as the AFF522 series, sold separately, which gives a clear reference for adhesive selection that is matched to this edge molding construction. The 12 foot length can be processed on typical shop equipment used for long laminate runs, allowing cuts and miters to be laid out along a single piece when shaping bullnose corners or transitions. The 1-1/2 inch profile height supports alignment to many laminated tops, so when the molding is bonded, the decorative edge can be trimmed flush to the surface for a continuous look.
This Formica Corporation laminate edge molding is identified specifically for countertops, islands, desks, and work stations, so it fits naturally into kitchen, office, and commercial work areas using laminate surfaces. The Bianco Antico matte finish coordinates with the corresponding Formica laminate pattern, allowing the edge to visually tie into the deck surface. Suitability for straight, curved, clipped, and 90 degree edges means one bullnose profile can travel around inside corners, outside corners, and gentle curves, which supports continuous lines on island peninsulas or L-shaped desks. The 12 foot length is particularly helpful on large islands or conference work stations where a single span reduces front-edge breaks. A moisture barrier MDF core supports these applications by giving the edge structure and moisture resistance appropriate to typical countertop and work station environments.
The bullnose profile on this IdealEdge molding creates a rounded front edge, so once bonded and trimmed, the transition from horizontal surface to vertical drop feels smooth in high-contact areas such as kitchen counters and office desks. A 1-1/2 inch profile height gives fabricators enough material to extend from the top surface down to the underside on many laminated assemblies, which simplifies trimming and reduces the risk of exposing core material along the bottom. The 144 inch length helps maintain this bullnose line without frequent joints, which can otherwise interrupt the rounded profile. The recommended AFF522 series glue, sold separately, is specified for this edge molding, so adhesive choice aligns with the laminate and moisture barrier MDF core construction. The 10 year limited warranty that covers delamination of the edge further supports confidence in the long-term bond along the bullnose, especially on heavily used surfaces.
The IdealEdge Bianco Antico piece is a Formica Corporation laminate edge molding, so it is designed to finish exposed laminate edges on suitable work surfaces.
This Formica IdealEdge Bianco Antico bullnose molding is 144 inches, or 12 feet, which supports long countertop and island runs with fewer seams in the edge line.
The IdealEdge bullnose molding is described as suitable for straight, curved, clipped, and 90 degree edges, so it can handle multiple plan shapes on the same installation.
This Bianco Antico edge molding has a 1-1/2 inch profile height, which covers from deck to underside on many laminated tops and supports a full bullnose reveal.
This IdealEdge molding uses a moisture barrier MDF core, providing a stable substrate with added moisture resistance for countertop and work surface edges.
The recommended glue for this IdealEdge molding is the AFF522 series, sold separately, which is specified to work with this laminate edge construction.
The Formica IdealEdge 6001-58 Bianco Antico matte finish bullnose edge molding brings a coordinated edge solution to countertops, islands, desks, and work stations, using a moisture barrier MDF core to support everyday use. A 1-1/2 inch profile and 12 foot length help cover common laminate top dimensions with fewer edge joints, while the bullnose profile provides a smooth, rounded front. For projects calling for a Bianco Antico laminate look carried cleanly down the edge, this IdealEdge molding offers the defined dimensions and specified adhesive reference needed to plan fabrication and installation efficiently.
Sold In: 1 Each