Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Carrara Bianco bullnose is a laminate edge molding designed to give a finished look on all sides of a laminate top, so countertops and work surfaces present clean, continuous edges. The bullnose profile in Carrara Bianco Etchings finish provides a shaped front edge that matches Formica laminates, which helps visually tie the edge into the main surface. A 1-1/2 inch height paired with a 144 inch length lets installers span long runs in a single piece, which reduces visible joints along the front of countertops, islands, desks, and work stations. The IdealEdge design is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile to address most front-edge layouts on a project. A moisture barrier MDF core supports the laminate edge, which helps the molding perform where spills and daily cleaning are common.
This Formica IdealEdge bullnose molding uses a 1-1/2 inch profile that matches one of the listed IdealEdge heights, which helps installers select the correct size for their build-up thickness. The 12 foot length allows layout of long edges with fewer joints to align, which can streamline cutting and fitting during fabrication. The edge molding is designed for use with glue, and Formica recommends glue from the AFF522 series, so fabricators can pair the molding with an adhesive type that suits this laminate edge construction. Because the profile works with straight, curved, clipped, and 90 degree edges, installers can cut and shape it to follow the countertop front, keeping one product type across different sections of the same project.
This Formica Corporation laminate edge molding is intended for use on countertops, islands, desks, and work stations, so it directly supports common residential and commercial laminate work surfaces. The Carrara Bianco Etchings finish allows it to coordinate with Formica surfacing in the same pattern, which is useful when building tops that need a consistent aesthetic from deck to edge. IdealEdge bullnose works on straight, curved, clipped, and 90 degree edges, so fabricators can run it along peninsula ends, inside corners, and soft radiuses without changing edge types mid-project. The 12 foot length makes it practical on larger islands and long work stations, since the span can often be covered with one piece trimmed to size rather than multiple shorter segments.
The moisture barrier MDF core under this IdealEdge molding supports laminate performance in areas where liquids are present, because the barrier limits moisture reaching the core from the front edge. That construction detail is important on countertops and work stations that see frequent wiping and occasional spills. The 1-1/2 inch height matches one of the stated profile sizes, allowing fabricators to align the bullnose with typical deck thicknesses so the top surface and edge radius meet cleanly. A 10 year limited warranty that covers delamination of the edge reflects Formica Corporations design intent for bonded performance over time, which matters on projects where long-term durability expectations are documented. The specified AFF522 series glue recommendation provides an adhesive reference aligned to this laminate edge, helping shops standardize their bonding process for repeatable results.
This Formica IdealEdge bullnose edge molding is 1-1/2 inches high and 144 inches long, so it spans typical countertop build-ups over a 12 foot run.
This Carrara Bianco Etchings bullnose edge molding is for use on countertops, islands, desks, and work stations, supporting a wide range of laminate work surfaces.
The moisture barrier MDF core helps limit moisture exposure at the edge, which supports long-term performance on tops that see spills and regular cleaning.
This IdealEdge bullnose is suitable for straight, curved, clipped, and 90 degree edges, so it can follow different front contours on the same project.
This Formica IdealEdge molding is recommended for use with AFF522 series glue, aligning the adhesive choice with the laminate edge construction.
The 10 year limited warranty on this Formica IdealEdge bullnose covers delamination of the edge, supporting long-term bonded performance expectations.
This Formica Corporation IdealEdge Carrara Bianco bullnose molding combines a 1-1/2 inch profile, 144 inch length, and moisture barrier MDF core to support countertop, island, desk, and work station builds. When a project calls for a Carrara Bianco Etchings finish with a molded bullnose front, this edge molding aligns the visual pattern, profile height, and laminate construction around the perimeter of the top. Selecting this specific IdealEdge part number 066962046D12000 keeps the edge design consistent wherever the laminate work surface transitions along straight, curved, clipped, or 90 degree runs.
Sold In: 1 Each