Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 6696-46 Carrara Bianco gives laminate countertops, islands, desks, and work stations a finished look on all sides, so exposed substrate and sharp laminate corners are replaced with a continuous decorative edge that looks intentional in the final install. This IdealEdge double radius edge molding uses the Carrara Bianco Etchings finish, which carries the marble-look decor across the edge so color and pattern visually wrap the work surface. The profile height of 1-1/2 inches is sized to cover common laminate build-ups, so the edge can hide the core and laminate transition in a single piece. The 12 foot length allows long runs on countertops, islands, or desks to be handled with fewer joints, which helps maintain a clean visual line. The product is classified as laminate edge molding, so it integrates into standard laminate fabrication workflows.
This Formica laminate edge molding is designed for use on countertops, islands, desks, and work stations, so its geometry and materials align with typical laminate fabrication and edge bonding practices in those applications. The manufacturer specifies a moisture barrier MDF core, so the edge is built to work at front edges where spills and routine cleaning occur, supporting stability where the laminate meets the core. The 1-1/2 inch profile provides enough height to cover the front build-up in one piece, so installers can align the molding with the laminate face and deck in a single operation. Recommended glue for this product is the AFF522 series (sold separately), so bonding is referenced to an adhesive family Formica has associated with this edge system. The 12 foot length means handling and clamping setups can be arranged around fewer seams in the run.
This Formica IdealEdge Carrara Bianco double radius edge molding is specified for use on countertops, islands, desks, and work stations, so it fits projects ranging from residential kitchens to office or shop surfaces built on laminate decks. Because it is suitable for straight, curved, clipped, and 90 degree edges, the same molding can move from long straight runs at the front of a counter to clipped corners or inside corners without switching profiles, which streamlines fabrication and layout. The 1-1/2 inch height gives coverage across the exposed build-up at the front edge, so plywood or particleboard cores remain hidden and the laminate transition is contained behind the decorative face. The Carrara Bianco Etchings finish carries the marble-inspired look through the edge, so islands or peninsulas with exposed ends can present a continuous decorative band around all visible sides of the top.
The moisture barrier MDF core in this edge molding is designed to support edge performance in areas subject to routine moisture exposure, so front edges of countertops and work stations can better maintain their bond line and appearance through typical cleaning cycles. The 12 foot length provides extended coverage, so long counters or islands can often be edged with a single piece per side, which reduces the number of joints that could interrupt the pattern or require extra finishing. As laminate edge molding, this product fits into standard cutting, fitting, and bonding processes used in laminate shops, so crews can integrate it with familiar tools and presses. The AFF522 series glue (sold separately) is recommended by the manufacturer for this IdealEdge product, so adhesive selection is referenced to a formulation aligned with the edge system. The 10 year limited warranty covering delamination of the edge underscores the design intent for the bond between the decorative laminate surface and the MDF core to hold over years of service in normal countertop, desk, or work station applications.
This IdealEdge laminate edge molding is for countertops, islands, desks, and work stations, so it suits typical laminate work surfaces in kitchens, offices, and shop environments that use laminate decks.
The double radius edge profile softens both top and bottom edges, so exposed laminate corners are reduced and the transition from horizontal surface to edge appears smoother on finished countertops and desks.
The edge molding has a 1-1/2 inch profile height and a 12 foot length, so it covers standard laminate build-ups and supports long runs with fewer joints to finish.
This Carrara Bianco IdealEdge uses a moisture barrier MDF core, so it is engineered to resist typical moisture exposure at countertop edges and help maintain the decorative laminate bond over time.
The manufacturer recommends AFF522 series glue (sold separately), so adhesive selection can be aligned with a product family specified for bonding this IdealEdge laminate edge molding.
The 10 year limited warranty on this edge molding covers delamination of the edge, so the laminate-to-core bond performance is backed for a defined period in normal use.
The Formica IdealEdge 6696-46 Carrara Bianco double radius edge molding pairs the Carrara Bianco Etchings finish with a moisture barrier MDF core, so laminate countertops, islands, desks, and work stations gain a coordinated, wrapped edge designed for long-term bond performance. The 1-1/2 inch profile and 12 foot length support efficient fabrication on standard laminate build-ups with fewer joints. For projects calling for a Formica Carrara Bianco look carried cleanly over the edge, this IdealEdge molding offers a defined profile, finish, and adhesive recommendation ready to integrate into laminate shop workflows.
Sold In: 1 Each