Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Neapolitan Stone is a laminate edge molding designed to deliver a finished look on all sides of laminate work surfaces. The 7404-11 Neapolitan Stone pattern in Satin Touch finish creates a coordinated waterfall edge that visually carries the laminate surface down the face of the countertop or work surface, which helps projects read as a single, continuous design rather than a laminated top with a separate strip. The molding is 1-1/2 inches high, so it suits many standard countertop build-ups where a taller edge profile is preferred for visual presence. At 144 inches long, each section spans typical kitchen runs, islands, desks, and work stations with fewer seams, which supports cleaner lines and reduces layout breaks. The laminate edge molding sits in the Laminate Edge Moldings product class, giving installers a purpose-built solution for finishing exposed edges.
This Formica IdealEdge 7404-11 Neapolitan Stone Satin Touch molding is shaped as a waterfall edge, which means the profile is designed to drop smoothly from the horizontal laminate surface down the vertical edge, giving a continuous face without a hard visual break. The 1-1/2 inch height provides adequate coverage for common substrate build-ups beneath laminate tops, which helps conceal substrate edges and joint lines. Being suitable for straight, curved, clipped, and 90-degree edges means this single profile can turn corners, run around radiused ends, and finish clipped corners without changing edge type, which can reduce setup time and pattern-matching concerns during installation.
This Formica Corporation IdealEdge Neapolitan Stone Satin Touch edge molding is intended for use on countertops, islands, desks, and work stations, so it fits both residential and commercial environments where a laminate surface needs a finished edge. The Neapolitan Stone 7404-11 pattern ties into stone-look laminate designs, and the Satin Touch finish gives the edge a low-sheen surface that visually harmonizes with matching laminates in the same finish. Because the edge is suitable for straight, curved, clipped, and 90-degree edges, an installer can carry the same 1-1/2 inch waterfall profile across an island, around a radius end, along a wall run, and across a return, which supports visual continuity. The 12 foot length makes it practical for long counters or multi-station work surfaces, reducing the number of seams that need to be planned into the job.
The moisture barrier MDF core is engineered for use in edge applications where occasional moisture contact is expected around sinks, appliances, or work areas, so the core supports the decorative surface by reducing the impact of everyday spills along the edge. The product class of Laminate Edge Moldings indicates that this molding is built specifically to pair with laminate sheet goods rather than acting as a generic trim, which helps maintain consistent profiles and reveals at the front of the top. The 1-1/2 inch high profile gives installers a consistent dimension to work against when building up substrate edges, which aids in repeatable fabrication from one project to the next. The recommended AFF522 series glue (sold separately) aligns the adhesive choice with what the manufacturer specifies for this edge, which supports bond quality during lamination. The 10 year limited warranty that covers delamination of the edge gives fabricators and end users a defined expectation for edge-laminate bond performance over time, which is important when specifying materials for long-term installations in kitchens, offices, or commercial work areas.
The Formica IdealEdge Neapolitan Stone piece is a laminate edge molding in the Laminate Edge Moldings class, so it is designed specifically to finish the exposed edges of laminate countertops and work surfaces.
This edge molding is for countertops, islands, desks, and work stations, allowing a single profile and finish to be used across different horizontal work surfaces in a project.
The molding is 1-1/2 inches high and 144 inches long, giving enough height to cover common laminate build-ups and enough length to span long runs with fewer seams.
This Formica IdealEdge molding uses a moisture barrier MDF core, which is designed to help the edge handle typical moisture exposure along countertops and work surfaces.
The recommended glue for this edge molding is the AFF522 series, sold separately, aligning installation with the adhesive specified for this product.
This edge molding has a 10 year limited warranty that covers delamination of the edge, defining support for the laminate-to-core bond over time.
The Formica IdealEdge 7404-11 Neapolitan Stone Satin Touch waterfall edge molding combines a 1-1/2 inch profile, 144 inch length, and moisture barrier MDF core with suitability for straight, curved, clipped, and 90-degree edges. That mix lets fabricators and installers carry one coordinated edge detail across countertops, islands, desks, and work stations while working within Formica Corporation specifications, giving projects a consistent stone-look edge treatment from one surface to the next.
Sold In: 1 Each