Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 8830-58 Elemental Concrete starts as a laminate edge molding with a matte finish in a concrete look, so countertops, islands, desks, and work stations carry the same decor across the edge for a consistent surface appearance. The double radius profile on this molding shapes the front and back edges, which creates a soft, finished contour instead of a sharp square edge on both exposed sides. A 1-1/2 inch height gives coverage for typical laminate build-ups, tying the edge visually into the deck without leaving exposed core at the bottom. The 144 inch, 12 foot length works well for full-length runs on countertops or long work stations, which reduces seam count and helps produce cleaner lines on large installations.
This Formica IdealEdge laminate edge molding uses a double radius shape, so it is suited to straight, curved, clipped, and 90 degree edges where both sides of the strip may be visible. The 1-1/2 inch height and 144 inch length form a continuous edge band along countertops, islands, desks, and work stations, which supports layout where the edge follows the deck profile. The moisture barrier MDF core is paired with laminate facing, so when used with the recommended AFF522 series glue (sold separately), the assembly is set up to bond the edge to common laminate substrate constructions.
This Formica IdealEdge laminate edge molding is specified for use on countertops, islands, desks, and work stations, so it fits projects that use laminate surfaces and need a decorative edge treatment. The Elemental Concrete matte finish decor lets the edge visually coordinate with surfaces carrying the same pattern, which helps carry the concrete look across corners and profiles. Because it is suitable for straight, curved, clipped, and 90 degree edges, a single molding type can follow complex layouts around an island or L-shaped work station, supporting design continuity. The 12 foot length can span long counter sections or desk runs, which is useful where a continuous edge line is preferred. The 1-1/2 inch profile height matches laminate build-ups that require full edge coverage from deck to bottom of the build, helping to conceal the substrate edge under the laminate face.
The double radius profile on this molding creates a rounded contour on both edges of the strip, which reduces sharp corners and gives a uniform feel wherever hands contact the edge. This shape is useful when both sides of the edge may be seen, such as islands or free-standing work stations, because the profile reads the same from either direction. The moisture barrier MDF core sits behind the laminate surface, so when used in countertop and work surface applications, the core is designed to resist moisture reaching into the MDF, supporting edge integrity in normal use conditions. The 144 inch length reduces the number of joints along a run, which helps maintain pattern flow on the Elemental Concrete decor. The recommended AFF522 series glue (sold separately) is identified for bonding this laminate edge to appropriate substrates, which aligns the adhesive system with the laminate and MDF construction for predictable installation behavior.
This Formica IdealEdge molding is a laminate edge molding with a moisture barrier MDF core, which pairs a decorative laminate face with a core designed to resist moisture penetration.
This Formica IdealEdge Elemental Concrete molding is for use on countertops, islands, desks, and work stations, so it suits laminate projects across kitchen, office, or shop-style work surfaces.
This laminate edge molding is 1-1/2 inches high and 144 inches long, so it covers standard laminate build-ups and spans long countertop or desk runs in a single piece.
The double radius profile gives both edges of the molding a rounded contour, which softens exposed edges and suits straight, curved, clipped, and 90 degree applications.
This Formica molding uses the 8830-58 Elemental Concrete matte finish, which delivers a low-sheen concrete look that coordinates with matching laminate surfaces.
This IdealEdge product is paired with recommended AFF522 series glue, sold separately, which is specified by Formica for bonding the laminate edge molding to compatible substrates.
This Formica IdealEdge 8830-58 Elemental Concrete matte finish double radius edge molding combines a 1-1/2 inch profile, 12 foot length, and moisture barrier MDF core for laminate projects that need a coordinated concrete-look edge. For countertops, islands, desks, and work stations using this decor, the molding helps carry the Elemental Concrete design over straight, curved, clipped, and 90 degree edges. When paired with the recommended AFF522 series glue (sold separately), it provides a defined system for edge treatment. Select this molding when a Formica laminate edge solution is needed to match the 8830-58 Elemental Concrete surface pattern.
Sold In: 1 Each