Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Azul Aran double radius edge is a laminate edge molding designed to give a finished look on all sides of laminate tops. The 9303-43 Azul Aran Artisan Finish pattern provides a coordinated appearance with Azul Aran surfaces, which keeps countertop, island, desk, and work station edges visually consistent. The double radius profile creates a smooth, rounded transition on both faces, which helps reduce sharp-feeling corners along traffic paths and seated areas. A 1-1/2 inch height matches common laminate build-ups, supporting clean alignment with typical top thicknesses. The 144 inch (12 foot) length spans long runs, which reduces joint locations along straight sections. Laminate Edge Moldings from Formica Corporation are part of the IdealEdge line, so the product is intended for decorative edge applications where a durable laminate face and formed profile are needed.
This Formica IdealEdge laminate edge molding is specified for straight, curved, clipped, and 90 degree edges, so one profile can handle varied plan shapes across a countertop or work station run. That flexibility supports islands with radiused corners, clipped corners on desks, and standard 90 degree edge conditions using the same edge style. The MDF core with moisture barrier is suited to typical laminate installation methods where an adhesive bond is required. Formica recommends AFF522 series glue, sold separately, which aligns the product with widely used laminate adhesives for bonding the molding to substrate edges. Using a 12 foot length allows installers to set up cuts and profiles for multiple sections from one stick, streamlining cutting, radius forming, and edge fitting work on site or in the shop.
This Formica IdealEdge 9303-43 Azul Aran laminate edge molding is specified for use on countertops, islands, desks, and work stations, so it fits common residential and commercial laminate top applications. The double radius profile works along outer runs of kitchen or breakroom countertops where people lean or rest forearms on the edge. On islands, the all-sides finished design supports exposed perimeter edges, helping maintain a continuous Azul Aran appearance around the full island plan. Desks and work stations benefit from the two rounded faces where hands, wrists, and equipment frequently contact the edge. The 1-1/2 inch height applies to standard laminate build-ups used in these applications, letting fabricators and installers integrate the molding into typical top thicknesses and underlayment configurations.
The combination of a formed double radius and a defined 1-1/2 inch profile height supports repeatable alignment during layout, as installers can reference the height against known laminate build-up dimensions on multiple projects. The ability to use this molding on straight, curved, clipped, and 90 degree edges means layout templates for a given Azul Aran job can rely on one consistent edge shape, reducing layout variation between sections. The moisture barrier MDF core is designed to resist common moisture exposure at edge locations, which supports long-term bond and face stability under routine cleaning conditions. Using the recommended AFF522 series glue, sold separately, connects the core and laminate face to an adhesive system recognized for laminate work, which supports predictable open time and bond performance. The 12 foot stick length also aids shop workflow, because fabricators can nest multiple parts from a single length, standardizing cut lists and reducing changeovers when processing several tops in the same Azul Aran finish.
The product is a Formica IdealEdge laminate edge molding in the 9303-43 Azul Aran Artisan Finish, so it serves as a decorative finished edge for laminate countertops, islands, desks, and work stations.
This edge molding is for use on countertops, islands, desks, and work stations, allowing one profile to handle typical laminate work surfaces in residential or commercial environments.
The molding is suitable for straight, curved, clipped, and 90 degree edges, so it can follow a variety of plan shapes and corner conditions with the same double radius profile.
The edge molding is 1-1/2 inches high and 144 inches long, so it matches many laminate build-ups and spans long runs with fewer joints to cut and dress.
The molding uses a moisture barrier MDF core, which is designed to resist typical moisture exposure at edge locations, supporting long-term edge stability on laminate tops.
Formica recommends AFF522 series glue, sold separately, for this IdealEdge molding, aligning the product with a laminate-focused adhesive system suitable for bonding to substrate edges.
The Formica IdealEdge 9303-43 Azul Aran double radius edge molding gives laminate projects a finished look on all sides, using a 1-1/2 inch profile height that works with common build-ups. The 12 foot length supports long countertops, islands, desks, and work stations with fewer joints. Suitability for straight, curved, clipped, and 90 degree edges simplifies planning around different corner conditions. The moisture barrier MDF core and recommended AFF522 series glue, sold separately, support dependable laminate edge performance. For Azul Aran Artisan Finish laminate jobs that call for a matching, formed edge treatment, this laminate edge molding aligns product pattern, height, and profile with typical laminate top requirements.
Sold In: 1 Each