Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Taj Mahal bullnose is a laminate edge molding that finishes exposed edges on countertops, islands, desks, and work stations, so laminate surfaces carry the same Taj Mahal look cleanly around the perimeter. The molding is part of Formica IdealEdge laminate edge moldings, which means it is designed to visually coordinate with Taj Mahal laminate tops for a continuous appearance. Its bullnose profile shapes the edge into a smooth rounded form, giving a softer transition that avoids sharp laminate corners in day-to-day use. The piece is identified as Formica IdealEdge 9922-ML Taj Mahal Monolith Finish Bullnose Edge Molding, so it carries the 9922 Taj Mahal pattern in a Monolith finish that matches that specific design family. This molding is supplied in a single 12 foot length, allowing one continuous run across longer edges so there are fewer seams to align during installation.
This laminate bullnose edge molding is suitable for straight, curved, clipped, and 90 degree edges, so a single Formica IdealEdge Taj Mahal bullnose profile can be used around a variety of top layouts without changing edge stock mid-job. The 1-1/2 inch height allows the installer to align the molding over the top build-up and trim back excess laminate, keeping the Taj Mahal pattern consistent while achieving a flush intersection with the deck. A recommended glue, the AFF522 series (sold separately), is specified for this edge molding, giving a bonding option intended for this IdealEdge product when attaching it to MDF core and laminate assemblies. Because this is a 12 foot length, long edges on countertops, islands, or work stations can be covered in one piece, with cuts reserved for returns, corners, or clipped ends.
This Formica IdealEdge Taj Mahal edge molding is outlined by Formica Corporation for use on countertops, islands, desks, and work stations, so it fits typical laminate work surfaces in kitchens, offices, and shop environments using that Taj Mahal pattern. Being suitable for straight edges means it can run the length of a rectangular counter front, while suitability for 90 degree edges allows it to turn inside or outside corners where tops change direction. When an island or work station has curved or clipped corners, the suitability for curved and clipped edges lets the same Taj Mahal bullnose trim follow those shapes, which keeps the pattern and profile consistent around the entire perimeter. The 12 foot length supports large islands or long desks in one run, minimizing visual breaks in the 9922 Taj Mahal Monolith finish across prominent viewing lines.
The 1-1/2 inch profile height of this laminate bullnose edge molding gives working room to align and trim the Taj Mahal edge over common build-up thicknesses, which helps achieve a straight finished line along the lower edge after routing or flush-trimming. The moisture barrier MDF core is engineered to limit moisture reaching the core from the exposed edge, which matters around countertops and work stations where water or cleaning liquids interact with the front edge. By using the recommended AFF522 series glue (sold separately), installers have a referenced adhesive choice that is associated with this IdealEdge Taj Mahal bullnose, supporting bond strength between the MDF core, laminate, and substrate. The 10 year limited warranty that covers delamination of the edge signals that Formica Corporation has designed this product so the Taj Mahal laminate and MDF core stay bonded, which is important where repeated contact along the edge could stress the glue line over time.
The Formica IdealEdge Taj Mahal bullnose is a laminate edge molding from Formica Corporation, so it finishes exposed laminate edges with the 9922 Taj Mahal Monolith design along the front of countertops and work surfaces.
This Taj Mahal laminate bullnose edge molding is intended for use on countertops, islands, desks, and work stations, so it suits common laminate work surfaces needing a coordinated 9922 Taj Mahal edge.
This Formica IdealEdge Taj Mahal bullnose is suitable for straight, curved, clipped, and 90 degree edges, allowing one edge profile to follow most counter layouts and corner conditions in a project.
This Taj Mahal laminate edge molding has a 1-1/2 inch profile height and a 144 inch length, which covers standard countertop build-ups and spans long runs with a single continuous bullnose piece.
This Formica Taj Mahal laminate bullnose uses a moisture barrier MDF core, which supports the laminated edge where everyday spills or cleaning moisture reach the front of the top.
This IdealEdge Taj Mahal edge molding has a recommended glue, the AFF522 series (sold separately), giving an adhesive option associated with bonding the MDF core and laminate edge to the substrate.
The Formica IdealEdge Taj Mahal bullnose edge molding combines the 9922 Taj Mahal Monolith laminate design with a rounded bullnose profile in a 1-1/2 inch by 144 inch format, so it addresses both coverage and appearance on countertops, islands, desks, and work stations. Its suitability for straight, curved, clipped, and 90 degree edges lets one profile carry through a complete Taj Mahal layout, simplifying pattern alignment from run to run. The moisture barrier MDF core, referenced AFF522 series glue (sold separately), and 10 year limited warranty that covers edge delamination work together to support bonded performance around active work edges. For projects built around the Formica Taj Mahal laminate look, this IdealEdge bullnose provides a matching, job-focused solution for finishing exposed front edges.
Sold In: 1 Each