Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Taj Mahal gives laminate countertops and work surfaces a finished look on all sides, so edges visually match the top and avoid raw laminate lines on exposed runs. This edge molding uses Formica IdealEdge laminate, tying directly into Formica Taj Mahal patterns for a coordinated appearance across countertops, islands, desks, and work stations. The double radius profile softens both exposed edges, which helps reduce sharp corners along traffic paths and at seated positions. The molding measures 1-1/2 inches high, giving coverage for common laminate build-ups in residential and commercial installations where a laminate deck and substrate need a unified edge treatment. A monolith finish is applied, providing a consistent surface appearance that aligns with the Taj Mahal design. The 12 foot length supports long counter stretches or large island runs with fewer joints to align during installation and trimming.
This Formica IdealEdge 9922-ML molding is designed for use on straight, curved, clipped, and 90 degree edges, so the same profile can carry through complex layouts without switching edge treatments. The MDF core accepts cuts for clipped corners and curved sections, supporting continuous alignment where tops change direction. A 1-1/2 inch vertical dimension gives fabricators room to align the molding with typical laminate build-ups and trim flush after bonding. The product is specified for use with AFF522 series glue, sold separately, so installers can match adhesive selection to the IdealEdge construction. Using a single 12 foot length along a front edge or island run helps keep joints away from high-visibility areas, and the double radius profile maintains the same contour as the edge turns or transitions around 90 degree corners.
This laminate edge molding is intended for countertops, islands, desks, and work stations where a Taj Mahal laminate look is desired on both the surface and the edge. The 1-1/2 inch height works with laminate tops that use a build-up at the front edge, so the molding can cover the combined thickness in one piece. Because the molding works on straight, curved, clipped, and 90 degree edges, it supports layouts that wrap around walls, create peninsulas, or form multi-side islands without changing profiles. The MDF core allows gentle curves within design limits, so fabricators can align the Taj Mahal pattern flow around corners and along arcs. In office or commercial work station applications, the finished look on all sides ensures exposed ends and back edges match the main work surface visually.
The double radius profile on this Formica laminate edge molding creates two eased edges, which helps installers deliver a uniform feel along front edges and exposed sides, reducing sharp transitions at seated positions and walk-by zones. The monolith finish on the Taj Mahal pattern keeps the edge surface consistent from top to bottom, which simplifies visual alignment during glue-up and trimming. With a 12 foot length, fabricators can run a single piece across long counters or large islands, limiting the number of joints that must be cut, aligned, and finished so pattern breaks are minimized. The MDF core gives a predictable substrate for bonding with AFF522 series glue, sold separately, so the edge and countertop assembly can function as a single component once cured. Because the molding is specified as suitable for straight, curved, clipped, and 90 degree edges, layout changes, returns, and inside corners can be planned around one edge profile, supporting repeatable fabrication steps from project to project.
The Formica IdealEdge Taj Mahal edge molding is 1-1/2 inches high and 144 inches long, which helps cover typical laminate build-ups and span long countertop or island runs with a single piece.
This molding is for countertops, islands, desks, and work stations, so it fits many residential and commercial laminate surface layouts that need a coordinated Taj Mahal edge treatment.
The Taj Mahal IdealEdge molding is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile to carry through complex countertop and work station designs.
The double radius profile rounds both exposed edges of the molding, creating softer transitions that help reduce harsh corners along front edges and exposed ends of tops.
This IdealEdge Taj Mahal molding uses an MDF core, providing a stable base for bonding and machining so cuts, curves, and flush trimming stay consistent along the length.
This Formica IdealEdge molding is recommended for use with AFF522 series glue, sold separately, aligning adhesive choice with the specified laminate edge construction.
The Formica IdealEdge Taj Mahal double radius molding gives countertops, islands, desks, and work stations a finished Taj Mahal look from surface to edge using a single coordinated profile. The 1-1/2 inch height and 12 foot length support typical laminate build-ups and long runs, while the MDF core and monolith finish help fabrication and visual alignment. For projects calling for straight, curved, clipped, or 90 degree edges in a Taj Mahal design, this laminate edge molding from Formica Corporation offers a focused solution through Wurth Baer Supply.
Sold In: 1 Each