Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Taj Mahal is a laminate edge molding that finishes exposed laminate edges, so countertops, islands, desks, and work stations present a unified Taj Mahal pattern from deck to edge. This molding is 1-1/2 inches high, so it covers standard laminate build-ups while creating a defined finished edge line along the front or side. The 144 inch length lets installers run a full 12 foot stretch on long tops or multiple shorter runs from one stick, supporting layout efficiency on kitchen, office, or commercial projects. As part of the Formica IdealEdge line, this edge molding is designed to visually match the Taj Mahal 9922-ML laminate, which helps keep color and pattern transitions consistent at the front edge. A monolith finish on the face coordinates with the laminate surface appearance, so the joint between deck and edge reads as a single, continuous surface in the finished installation.
This Formica IdealEdge laminate edge molding is intended for use with adhesive, so installers bond the edge to the laminate deck and substrate for a continuous assembly. Recommended glue is the AFF522 series (sold separately), which is called out for this product and guides adhesive selection for edge-to-deck bonding. The molding is suitable for 90 degree edges, so it can run along front edges or square ends on countertops and work stations without additional profiles. Suitability for curved and clipped edges means that, within the bending limits of the MDF core and laminate, installers can form this profile around inside or outside curves and clipped corners planned into the countertop. Because the product is part of Formica laminate edge moldings, it is intended to integrate into standard laminate shop workflows where tops are fabricated, edged, and finished before installation on site.
This Taj Mahal waterfall edge molding is specified for countertops, islands, desks, and work stations, so it fits both residential-style and commercial laminate projects that call for a Taj Mahal pattern. On long counters, the 12 foot length allows a continuous front edge in many layouts, which helps keep the Taj Mahal pattern flowing without frequent joints. At islands, the 1-1/2 inch height creates a pronounced vertical face that coordinates with the horizontal surface, which supports a monolithic look around the perimeter. Desks and work stations also benefit from the moisture barrier feature, because spills or cleaning at the front edge contact a surface designed for exposure in these areas. Since the molding belongs to the laminate edge moldings product class, it ties directly into laminate sheet use, supporting coordinated design across surfaces and edges in the same space.
The MDF core inside this edge molding gives a predictable, machinable base for trimming and profiling after bonding, which helps fabricators achieve consistent reveals along straight, curved, clipped, and 90 degree edges. The monolith finish is intended to align visually with the Taj Mahal laminate, so installers can plan seams and joints knowing the face of the edge is designed to coordinate with the deck pattern. The moisture barrier functions as part of the edge construction, helping limit moisture migration into the core at front edges over years of typical use. Because a 10 year limited warranty covers delamination of the edge, the product is positioned for long-term adhesion performance when bonded correctly with a compatible adhesive such as the recommended AFF522 series. Using one edge style across counters, islands, desks, and work stations simplifies fabrication steps and supports repeatable finished results across multiple rooms or stations in a project.
The Formica IdealEdge Taj Mahal molding is 1-1/2 inches high and 144 inches long, which supports coverage of standard laminate build-ups and allows long runs along countertops or work stations.
The Taj Mahal waterfall edge molding is specified for countertops, islands, desks, and work stations, so it suits a range of laminate surface applications in residential or commercial settings.
The laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile to address most perimeter shapes on a countertop or work station layout.
The edge molding uses an MDF core, giving a stable, machinable base under the laminate surface that supports trimming, profiling, and consistent reveals after the edge is bonded.
The moisture barrier in the edge molding helps resist routine moisture exposure at front edges, which is important around sinks and work areas where spills or cleaning are common.
The 10 year limited warranty on this Formica IdealEdge molding covers delamination of the edge, supporting expectations for long-term bond performance under normal service conditions.
This Formica IdealEdge 9922-ML Taj Mahal waterfall edge molding pairs a 1-1/2 inch height with a 144 inch length, which fits many countertop, island, desk, and work station runs in one piece. Suitability for straight, curved, clipped, and 90 degree edges means one profile can follow most perimeter designs you fabricate in Taj Mahal laminate. The MDF core, moisture barrier construction, and stated 10 year limited warranty on delamination give this molding clear performance parameters for long-term laminate work. For projects calling for a coordinated Taj Mahal monolith finish from surface to edge, this specific Formica laminate edge molding offers the dimensions and use-range needed for efficient shop fabrication and clean finished installations.
Sold In: 1 Each