Berenson Dierdra Series 5-1/16" (128 mm) Center to Center Polished Nickel Pull, - 9835-1014-P
Description
Berenson Dierdra Series Pull For Consistent Style
Berenson Dierdra Series pull gives cabinets a defined handle point, so doors and drawers are easy to grab in daily kitchen use. This pull is identified as Dierdra Series, which groups it with matching cabinet hardware for projects aiming at the same design language across multiple fronts.
The Dierdra 5-1/16 inch pull has a center to center measurement of 128 mm, so drilling layouts can follow that exact spread for repeatable installation across a run of cabinets. This fixed center spacing supports straight alignment from cabinet to cabinet, which matters when doors are ganged in rows.
The polished nickel finish on this pull presents a bright, reflective surface, which visually ties together cabinets that share the same finish. Berenson categorizes this product as decorative hardware in their handles and pulls class, so it is intended to serve both a gripping function and a visible style role on finished casework.
The web description notes it is not to be used as an appliance pull, which differentiates this part from heavier appliance-focused handles and keeps it in standard cabinet duty.
Key Dierdra Cabinet Pull Details For Projects
- The 5-1/16 inch dimension translates to a 128 mm center to center pull, so layout measurements can be set in either imperial or metric when planning drilling jigs.
- The polished nickel finish provides a consistent metallic look, which helps maintain the same visual tone on doors and drawers across a full kitchen run.
- Being part of the Dierdra Series groups this pull within a defined design family, which supports uniform style when multiple handle sizes from the same line are used together.
- Berenson lists this as decorative hardware in their handles and pulls category, so it is meant to function as a working handle while also acting as a visible design element.
- The product class association with Berenson pulls gives it a known manufacturer source, which matters when matching part numbers like 9835-1014-P across bids and job documents.
Installation Use Of The 128 Mm Center To Center Pull
This Dierdra cabinet handle uses a 128 mm center to center mounting measurement, so installers can base all drilling on that single dimension. Using the same hole spacing from cabinet to cabinet keeps hardware rows visually straight, especially on banks of doors.
The 5-1/16 inch description matches the 128 mm spacing for planning in imperial-driven shops while still aligning to metric layouts used on many cabinet lines. The piece functions as a pull within decorative hardware and moldings, so it is intended for standard cabinet door and drawer operation rather than appliance loads.
The note that it is not to be used as an appliance pull sets task boundaries for this handle, directing it to cabinet applications where typical opening forces occur instead of heavier appliance door forces.
Where This Dierdra Cabinet Pull Works Best
Dierdra Cabinet Handle In Kitchen Installations
The web description states that longer cabinet handles of Dierdra help achieve a uniform look across a kitchen, so this pull is aimed at cabinet installations where repeated fronts benefit from consistent hardware. As a decorative handle and pull, it fits common door and drawer locations in kitchen casework where a defined gripping point is needed.
The part is identified as a Dierdra pull in polished nickel, so it supports projects targeting a polished nickel theme on cabinets. Because the handle belongs to the Berenson Dierdra Series, it can be used wherever that series is specified in plans, helping installers align field work with design documents that call out this particular style line on elevations or schedules.
The 128 mm center to center mounting also places this handle in layouts where that spacing is already standard in a cabinet line, so it reinforces consistency along rows of cabinets that share the same drilling pattern.
Details That Support Consistent Pull Alignment
The explicit 128 mm center to center measurement gives installers a repeatable drilling reference, which helps maintain straight hardware lines across doors and drawers. Matching the 5-1/16 inch naming with the 128 mm value connects metric and imperial planning, so shop drawings and site work can reference the same handle without confusion over spacing.
The polished nickel finish listed for this pull provides a uniform surface color, which helps reduce visual variation where handles repeat across upper and lower cabinets. Being assigned a specific manufacturer part number, 9835-1014-P, allows this pull to be ordered and documented precisely, reducing the chance of mixing in different styles on the same project.
The note that it is not to be used as an appliance pull defines its role as a standard cabinet handle, so it aligns with regular cabinet door and drawer use rather than high-load appliance doors.
Common Questions About The Dierdra Cabinet Pull
What center to center size is this Dierdra pull?
The Berenson Dierdra Series pull has a 128 mm center to center measurement, which sets the drilling distance between holes and supports consistent alignment across multiple cabinet fronts.
How long is the Dierdra 9835-1014-P cabinet pull?
The pull is identified as a 5-1/16 inch Dierdra handle, so its design length aligns with that size, helping match it to layouts that call for this specific dimension on cabinets.
What finish does this Dierdra cabinet handle have?
This cabinet handle is listed in a polished nickel finish, which provides a bright metallic appearance that visually coordinates with other polished nickel decorative hardware on kitchen cabinets.
Is the Dierdra pull intended for use on appliances?
The web description states it is not to be used as an appliance pull, so it is aimed at standard cabinet doors and drawers rather than appliance doors that see higher forces.
How does the Dierdra Series help with a uniform kitchen look?
The description notes that longer cabinet handles of Dierdra help achieve a uniform look across a kitchen, supporting consistent style where the same series is used repeatedly.
Who manufactures the Dierdra 128 mm center to center pull?
This pull is from Berenson Corporation and is categorized by them as decorative hardware and moldings in their handles and pulls class for cabinet projects.
Select The Right Dierdra Pull For Your Cabinets
The polished nickel Berenson Dierdra Series pull with 128 mm center to center spacing ties cabinet runs to a single hardware style and drilling pattern. When a project calls for Dierdra in polished nickel at 5-1/16 inch size, this part number 9835-1014-P provides that specific combination for consistent cabinet handle installation.