Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dierdra pull 128mm center to center gives you a Berenson Corporation handle sized for common cabinet drilling, so you can match standard 128 mm layouts on doors and drawers and keep handle placement consistent across a run.
The Berenson Dierdra Series identity ties this pull directly to the broader decorative hardware line, which matters when you want visual continuity on multi-room projects that reuse the same series profile on cabinets of different sizes.
The 5-1/16 inch (128 mm) center to center dimension describes the mounting hole spacing, so it supports straightforward planning of boring patterns and simplifies layout when converting from knobs to pulls on face frames or frameless cabinets.
The vintage nickel finish called out in the SAP description provides a specific, classic tone, which helps you coordinate with existing hinges, latches, or other nickel-finished decorative hardware without guessing at the color family on site.
The note "Not to be used as an appliance pull" sets a clear intent for cabinet and drawer applications only, which matters when you are separating decorative cabinet hardware from heavier appliance-door solutions in a design or specification set.
The 128 mm center to center mounting size defines the hole spacing required for this Berenson Dierdra cabinet pull, which streamlines retrofit work when you are matching an existing 128 mm pattern on replacement fronts or refaced doors.
The 5-1/16 inch center to center dimension gives an imperial reference to the same spacing, which helps when shop drawings or cabinet fronts are dimensioned in inches while drilling fixtures reference metric measurements.
The designation as a pull under Decorative Hardware & Moldings|Handles and Pulls clarifies that this piece is meant for hand operation on doors and drawers, which guides placement away from high-load applications where a dedicated appliance pull is specified.
The explicit statement "Not to be used as an appliance pull" directs installation planning toward typical cabinet openings, so this handle is reserved for standard cabinet doors and drawers instead of heavier appliance panels that demand hardware rated for higher forces.
The Berenson Dierdra Series identification positions this pull within a decorative cabinet hardware family, which benefits whole-room layouts where you want a unified handle style on doors and drawers across kitchens, baths, or built-ins using the same visual language.
The 5-1/16 inch (128 mm) center to center layout aligns with a widely used boring standard, which suits cabinets drilled for 128 mm pulls at the factory or in the shop and helps maintain consistent reveal distances from door edges on aligned fronts.
The vintage nickel finish detailed in the SAP description and web description text supports designs aiming for a classic, muted metal tone, which can coordinate with nickel-tone hinges and latches so the hardware set reads as an intentional group rather than mixed parts.
The classification as Decorative Hardware & Moldings|Handles and Pulls, Berenson anchors this item in the decorative hardware layer of a project, which helps specifiers separate it from structural components and assign it to finish hardware schedules for cabinetry and millwork.
The note that it is not to be used as an appliance pull helps project teams steer this model toward typical cabinet fronts, which keeps appliance elevations reserved for hardware specifically designated for the loads and leverage of appliance doors.
The Dierdra pull 128mm center to center dimension gives installers a fixed drilling reference, which improves repeatability when setting up boring jigs for multiple cabinets or drawer fronts that must align across a bank or tall run.
The dual expression of the same spacing as 5-1/16 inches and 128 mm supports teams working across imperial and metric drawings, which reduces conversion errors when layouts, shop notes, and jig markings use different units.
The specific vintage nickel finish label enables accurate selection during ordering, which reduces finish mismatches when combining this pull with other vintage nickel pieces from Berenson Corporation or matching hardware lines on the same project.
The formal category Handles and Pulls, Berenson confirms the product type for documentation, which helps hardware schedules and purchase orders capture the correct item when multiple decorative lines from the same supplier are present.
The manufacturer part number 9803-1VTN-P ties all these attributes to one cataloged item, which supports clear communication between designers, purchasing staff, and installers so that the pull specified on drawings is the same one installed on the cabinets.
The Berenson Dierdra pull has a 5-1/16 inch (128 mm) center to center size, which sets the spacing between mounting holes and drives drilling layout and replacement fit decisions.
The 9803-1VTN-P Dierdra pull uses a vintage nickel finish, giving a classic nickel tone that helps it coordinate with other nickel decorative cabinet hardware on a project.
The Dierdra pull is categorized under Decorative Hardware & Moldings|Handles and Pulls for cabinets, making it suited to doors and drawers rather than structural or mechanical applications.
The Berenson Dierdra pull is described as not to be used as an appliance pull, so it is intended for standard cabinet fronts instead of appliance doors or panels.
The 128 mm center to center sizing matches a common boring standard, which simplifies using existing jigs and aligning multiple pulls across cabinet runs.
The Berenson 9803-1VTN-P part number uniquely identifies this Dierdra Series 128 mm vintage nickel pull, supporting accurate ordering and clear references on project documentation.
The Dierdra pull 128mm center to center from Berenson Corporation offers a clearly specified 5-1/16 inch (128 mm) hole spacing in a vintage nickel finish, which supports predictable cabinet layouts where consistent drilling patterns and coordinated nickel hardware are priorities.
The defined part number 9803-1VTN-P and its classification under Decorative Hardware & Moldings|Handles and Pulls, Berenson give you a precise decorative cabinet pull choice for drawings, bids, and project hardware lists that rely on exact product identification.
