Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rubbermaid Wavebrake 35 QT 2.0 bucket wringer provides a combined bucket and side-press wringer setup for commercial floor mopping, so crews handle solution, wringing, and emptying in one unit during routine janitorial and sanitation work.
The 35 QT capacity supports typical mop charging and rinsing cycles in maintenance routines, helping staff service larger floor areas before needing to dump and refill, which keeps cleaning runs efficient on busy jobs.
The side-press wringer design focuses force from the handle directly onto the mop head, so workers twist out excess water without handling soiled fibers, maintaining a more consistent moisture level across passes on tile or sealed surfaces.
The bright yellow color matches common janitorial color coding for wet floor work, so the combo remains clearly visible in active work zones and is easy to spot in storage areas when preparing for cleaning rounds.
The branded Wavebrake configuration within the Rubbermaid 2.0 lineup pairs the bucket and wringer as a single combo, so crews move one unit between closets, elevators, and work areas instead of shuffling separate loose components during a shift.
The built-in drain with its foot-operated control lets staff empty the Rubbermaid Wavebrake 35 QT 2.0 bucket wringer directly at the disposal point, so they work with the unit on the floor instead of hoisting it to pour off wastewater.
Integrated handles help align the bucket as it is rolled or lifted into position, so crews keep the solution level more stable when navigating thresholds or doorway transitions along janitorial routes.
The freestanding wringer, guided by its own integrated wringer handle, lifts free from the bucket when needed, so workers clear the top opening for detailed interior cleaning or cross-contamination control between different facility zones.
When reattached, the freestanding wringer returns the combo to a side-press layout, so operators go back to consistent mop wringing without reconfiguring other janitorial and sanitation supplies in the closet.
The Rubbermaid Wavebrake 35 QT 2.0 bucket wringer is positioned for janitorial and sanitation tasks where a dedicated mop station is required, such as maintenance rooms, corridors, and service areas that cycle through daily wet-floor cleaning.
The 35 QT capacity aligns with typical commercial mop head sizes, so staff mix and carry enough solution for a series of passes across medium to large areas like hallways, lobbies, or production-adjacent spaces before returning to refill.
Within shop and safety oriented environments, this janitorial and sanitation mop bucket provides a defined cleaning fixture beside other shop supplies, so floor care remains part of the same organized workflow used for tools, abrasives, and fasteners.
The side-press bucket wringer combination keeps mop charging, wringing, and transport in one footprint, so teams stage a single unit in closets or staging zones instead of spreading individual components across the workspace.
The freestanding wringer configuration is useful wherever cleaning teams occasionally need to remove the wringer for thorough rinsing, allowing the bucket to be rinsed and put back into service as part of regular sanitation routines.
The built-in drain with foot-operated activation on this Rubbermaid Wavebrake 35 QT 2.0 bucket wringer changes the emptying step from a heavy lift to a floor-level operation, so workers handle wastewater using controlled drainage rather than overhead tipping.
This foot-operated drain supports repeatable emptying at the same floor drain locations, helping crews move through end-of-run cleanup without improvising lift angles each time the bucket needs to be cleared.
Integrated handles give crews consistent grab points whenever they reposition the bucket, so hand placement stays the same from shift to shift, which supports predictable control on ramps, transitions, and tight janitor rooms.
The handle layout ties directly into the 35 QT volume, since molded grips provide leverage at the sides of that larger solution mass, helping teams tilt, steer, or lift without fighting awkward holding positions.
The freestanding wringer, controlled by its integrated wringer handle, comes off the bucket as a single upper unit, so operators separate wringing hardware from solution storage whenever deep cleaning or part swaps are part of the maintenance schedule.
Once the freestanding wringer is set back on the bucket, the side-press configuration returns to normal service, so mops are wrung at the same pressure point and angle each time, reducing variation in floor moisture from one worker to another.
The Rubbermaid Wavebrake 35 QT 2.0 bucket wringer has a 35 QT capacity, which supports typical commercial mopping cycles before solution needs to be drained and replaced.
The built-in drain uses a foot-operated control so staff empty the mop bucket at floor level, reducing the need to lift or tilt a full 35 QT load during disposal.
The foot-operated drain on this mop bucket lets workers start drainage while standing in a stable position, giving better control of wastewater flow at floor drains.
The integrated handles provide defined grip points on the bucket body, so crews carry or tilt the unit with more control during transport, filling, and emptying tasks.
The freestanding wringer lifts off the bucket as its own unit using the integrated wringer handle, allowing easier cleaning or servicing of the wringer and bucket.
The side-press wringer focuses handle force onto the mop head, helping remove excess water so floors receive a more consistent level of moisture during cleaning.
The Rubbermaid Wavebrake 35 QT 2.0 bucket wringer with side-press action, built-in foot-operated drain, integrated handles, and freestanding wringer setup is structured for routine janitorial and sanitation work where efficient floor cleaning cycles matter.
The 35 QT capacity, integrated grip points, and removable wringer let maintenance teams handle solution, wringing, and emptying as repeatable steps, so this combo fits naturally into organized shop and facility cleaning programs.
Order the RCPFG758088YEL mop bucket combo from Wurth Baer Supply to align your floor care station with a dedicated janitorial and sanitation mop bucket designed for frequent commercial use.