Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass 22 inch 6610 drawer slide is a 3/4 extension, standard epoxy coated Euro slide from the Grass 6610 Series that supports everyday cabinet drawer use with controlled travel. The unhanded side mount design lets the same slide work on either side of the drawer, which simplifies planning and reduces part variation in the shop. The slide is bottom mount with additional holes for side mount, so it can serve different construction methods while keeping the same running profile. A 100 lb rating per ANSI/BHMA testing means the slide is tested to a recognized performance standard, supporting typical drawer loads in residential or light commercial cabinets. The standard 1/2 inch side clearance works with common cabinet layouts, so it fits into many euro-style installations that follow this clearance convention. The single captive design will absorb tolerances up to 2 mm and still run very smooth, which helps drawers operate acceptably even when box dimensions are slightly out.
This Grass 6610 Series slide is described as bottom mount with additional holes for side mount, so installers can fasten it through the lower surface or through the side positions depending on cabinet construction. Holes in both members for #6 FHP or Euro screw provide defined fastener locations on both the cabinet and drawer members, which supports consistent positioning across multiple cabinets. The 32 mm system compatible layout means the hole pattern works within standard 32 mm cabinet drilling systems, which is useful in production shops using line-boring equipment. The standard 1/2 inch side clearance supports predictable spacing from drawer side to cabinet side, helping installers hit their clearances when building to common euro dimensions. The unhanded side mount configuration also means that installers do not track left and right pieces separately during assembly.
This Grass 22 inch 6610 drawer slide is part of the Grass 6610 Series, placing it within a euro-style slide family used in many cabinet shops. The 22 inch length supports medium-depth drawers often used in kitchen, bath, or shop cabinets where full-depth reach is not required but substantial storage is needed. The standard 1/2 inch side clearance matches common euro cabinet practices, so cabinetmakers building to this standard can integrate the slide without redesigning carcass or drawer widths. The bottom mount description with additional holes for side mount gives flexibility for different case constructions, whether the shop prefers a bottom-bearing layout or direct side fastening. Since the slide is unhanded side mount, it reduces the number of SKUs that must be stocked for left and right sides, which supports streamlined production and service stocking in busy shops.
The 100 lb rating per ANSI/BHMA testing describes a defined load performance based on an established standard, which helps shops align drawer sizing and contents with this rating in repeat builds. The single captive design that absorbs tolerances up to 2 mm and still runs smooth is useful in real cabinet production, because minor width variations from saw setup or material movement can occur without causing the drawer to bind. Parallel self closing action at 2-5/8 inch means that within the last portion of travel, the slide engages a self closing action that helps pull the drawer fully into the cabinet, which supports consistent front alignment without relying solely on the user to push it tight. Holes in both members for #6 FHP or Euro screw give predictable fastening points, which supports building jigs or production setups that repeat hole locations for faster assembly. The 32 mm system compatible description also connects directly to line-bored casework, helping maintain alignment between hinge lines, shelf pins, and drawer slide positions in modular cabinet runs.
The Grass 30744-22 is a 22 inch, 3/4 extension, standard epoxy coated Euro slide from the Grass 6610 Series, so it works as a side mount drawer slide in euro-style cabinet applications.
This 6610 Series slide has a 100 lb rating per ANSI/BHMA testing, which supports typical drawer loads in many cabinet installations where moderate weight is expected.
This Grass 22 inch 6610 drawer slide uses standard 1/2 inch side clearance, which fits layouts built around that common euro-style dimension between drawer side and cabinet side.
The Grass 6610 Series slide is unhanded side mount, so the same slide can be installed on either the left or right side, simplifying inventory and installation.
This 6610 Series slide features parallel self closing action at 2-5/8 inch of travel, which pulls the drawer closed during the final portion of movement for consistent front alignment.
The Grass 30744-22 has holes in both members for #6 FHP or Euro screw and is 32 mm system compatible, supporting line-bored cabinets and repeatable mounting.
The Grass 22 inch 6610 drawer slide combines 3/4 extension travel, 100 lb ANSI/BHMA-tested rating, and standard 1/2 inch side clearance to support common cabinet drawer layouts. The bottom mount design with additional side mount holes lets the same slide fit different case constructions, which can simplify product standardization across a shop. The unhanded side mount configuration and 32 mm system compatible hole pattern support efficient installation in both custom and production environments. For projects built around euro-style dimensions and looking for a tested 22 inch Grass America option, this 6610 Series slide offers a defined set of mounting and performance details to work from.
Sold In: 1100 Set