Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Caliber appliance pull is an 18 inch center to center handle designed as an appliance pull, so it spans wider appliance doors and panels and gives a substantial gripping point when you are opening heavier fronts in a kitchen layout.
The Amerock Corporation Caliber Series identity ties this pull to a known decorative hardware line, which helps you visually coordinate this satin nickel 18 inch appliance pull with other handles and pulls in the same family when you are laying out a full room of fronts.
The satin nickel finish specified in the product name provides a neutral metallic look, which helps this Amerock Caliber Series Satin Nickel 18 inch center to center appliance pull work with a range of cabinet and appliance face colors without calling attention away from the surrounding surfaces.
The 18 inch, or 457 mm, center to center dimension listed in the web description defines the bore spacing, so you can drill accurately on appliance panels and align this Amerock BP36961G10 pull with adjacent decorative hardware on nearby cabinet doors and drawers.
The 18 inch (457 mm) center to center dimension specified for the Amerock Caliber Series Satin Nickel appliance pull sets the distance between fastener points, so your drilling pattern lines up with the pull legs and keeps the handle straight on tall appliance fronts.
Because this Amerock BP36961G10 pull is identified within the Handles and Pulls category, it installs in the same general manner as other decorative pulls in a woodworking environment, which lets you use familiar drilling jigs and layout methods when setting it on panels.
The appliance pull product class designation signals that this Caliber Series Satin Nickel 18 inch center to center pull is intended for appliance-scale faces, so its overall span supports two-handed operation on taller doors where extra leverage can help move heavier units smoothly.
The Amerock Caliber Series Satin Nickel 18 inch (457 mm) center to center appliance pull is classified under Decorative Hardware & Moldings | Handles and Pulls, so it suits finished cabinet and appliance faces where visible hardware becomes part of the overall millwork design.
The appliance pull product class for this Amerock BP36961G10 handle points it toward appliance doors and panels, meaning the 18 inch center to center span gives coverage across wider fronts that benefit from a long grip area when users open and close doors repeatedly.
Because the product name explicitly states Satin Nickel, this Amerock Caliber appliance pull presents a consistent satin nickel appearance across its surface, which allows installers to align it with other satin nickel decorative hardware elements in the same room for a unified look.
The 18 inch and parallel 457 mm measurement called out together in the description provides both imperial and metric references, which helps when a project team uses mixed dimension standards and needs to relate shop drawings to field drilling on appliance panels.
The combination of Amerock Corporation branding and the Caliber Series designation identifies a specific hardware line for this satin nickel 18 inch center to center appliance pull, which supports consistent selection when you are following written spec packages on cabinet and appliance fronts.
The exact manufacturer part number BP36961G10 attached to this Amerock Caliber Series Satin Nickel 18 inch center to center appliance pull gives you a precise reference in ordering systems, which reduces the chance of pulling a different size or finish when restocking or staging jobs.
The defined 18 inch (457 mm) center to center drilling dimension on this appliance pull lets you standardize jig setups for repeated installations, which helps keep alignment consistent across multiple appliance panels and maintains a straight visual sightline across a long elevation.
The appliance pull classification within Decorative Hardware & Moldings | Handles and Pulls indicates that this Amerock Caliber satin nickel handle is intended to act as both a functional pull and a visible design element, which is useful when drawings call for decorative hardware that also carries daily operational loads on appliance doors.
The Amerock BP36961G10 is a Caliber Series satin nickel 18 inch center to center appliance pull, so it functions as a decorative handle on appliance-scale doors and panels.
On this Amerock Caliber appliance pull, 18 inch center to center means the mounting holes are spaced 18 inches, or 457 mm, apart, guiding drilling layout on appliance faces.
This Amerock Caliber Series Satin Nickel 18 inch center to center piece is classified as an appliance pull in the Decorative Hardware & Moldings | Handles and Pulls category for visible fronts.
This Amerock BP36961G10 Caliber Series appliance pull is identified as Satin Nickel, giving it a satin nickel surface that coordinates with other satin nickel decorative hardware.
The BP36961G10 part number uniquely identifies this Amerock Caliber Series Satin Nickel 18 inch center to center appliance pull, helping match specifications and reorder the same handle.
This Amerock Caliber Series Satin Nickel 18 inch center to center pull is listed as an appliance pull, signaling that it is intended for appliance doors and panels.
The Amerock Caliber Series Satin Nickel 18 inch (457 mm) center to center appliance pull BP36961G10 provides a defined drilling span, an appliance pull classification, and a satin nickel finish, which together support layout, scale, and visual coordination on appliance doors.
When a project calls for an Amerock Corporation Caliber Series satin nickel appliance pull in the 18 inch center to center size, this BP36961G10 part aligns with that description and lets you match decorative hardware details across appliance fronts and adjoining cabinetry.