Amerock Valor matte black knob is a decorative knob from Amerock Corporation that brings a consistent look to cabinet doors or drawers. The BP37320MB manufacturer part number identifies this specific Valor Series knob, which helps match it with other Amerock hardware on the job. Its design as part of the Decorative Hardware and Moldings category places it right in the sweet spot for visible cabinet surfaces where appearance matters as much as function. The knob measures 1-7/16 in (37 mm) in length, giving a defined grip point across the face that is easy to locate by feel when opening doors or fronts. A 7/16 in (11 mm) width keeps the profile slim, which is useful when working with tighter reveals or closely spaced fronts. The matte black finish anchors modern and transitional layouts, providing a dark, even tone that reads clean on most cabinet finishes.
The 1-7/16 in (37 mm) length of the Amerock Valor Series knob sets the main footprint on the cabinet face, giving installers a known size to work around when laying out multiple pulls on a run. Its 7/16 in (11 mm) width keeps the projection line visually narrow, which works well when hardware needs to stay visually light on narrower rails or small drawer fronts. The knob is categorized as a knob within Decorative Hardware and Moldings, so it is meant to be the direct hand contact point on cabinet doors or drawers. The Amerock Corporation branding and BP37320MB part reference supply a clear identity, which is useful when planning consistent hardware across multiple rooms or phases in the same project.
The Amerock Valor Series matte black 1-7/16 in (37 mm) length x 7/16 in (11 mm) width knob fits naturally into cabinet and furniture applications where a defined but compact pull point is needed. As part of the Decorative Hardware and Moldings category, it is aimed at exposed surfaces such as kitchen cabinets, bath vanities, built-ins, and casework. The modest length helps the knob sit proportionally on standard door rails and smaller drawer fronts, avoiding a top-heavy look on tighter faces. The 7/16 in (11 mm) width keeps the knob visually light, which helps maintain cleaner lines on frameless or inset installations where hardware can dominate the reveal if too bulky. Because it is identified as an Amerock knob within the Amerock Valor Series, it slots easily into projects already using Amerock hardware, giving designers and installers a defined option when they want a matte black piece that ties into a named family.
The defined 1-7/16 in (37 mm) length of this Amerock Valor cabinet knob makes layout more predictable, since installers can center that length on stiles or drawer fronts and know exactly how much hardware will show on each side of a drilling point. The 7/16 in (11 mm) width means the knob occupies minimal visual space side-to-side, which reduces crowding when multiple knobs are used on smaller drawers or closely spaced doors. Its matte black finish supports consistent results across a bank of cabinets because the low-sheen surface helps mask minor fingerprints and reflections, keeping the hardware appearance uniform under different light angles. Working with a clearly labeled Amerock knob, using the BP37320MB part number, simplifies documentation for shop drawings and cut sheets, which helps reduce ordering errors and keeps replacements aligned with the original specification during future service work.
The Amerock Valor Series BP37320MB knob measures 1-7/16 in (37 mm) in length and 7/16 in (11 mm) in width, giving a compact footprint that suits standard cabinet doors and drawer fronts.
The matte black finish on this Amerock Valor knob provides a dark, low-sheen surface that keeps reflections down and helps the pull read as a clean, modern accent on most cabinet finishes.
The Amerock Valor Series knob is categorized as decorative hardware for cabinets, making it suitable for kitchen, bath, and built-in casework where a visible hand pull is required.
The BP37320MB part number uniquely identifies this Amerock Valor knob, helping installers and shops match existing hardware and streamline reordering on multi-phase or repeat projects.
The 1-7/16 in length provides a known size to center on stiles or drawer fronts, which simplifies drilling layouts and keeps hardware proportions consistent across a cabinet run.
This Amerock decorative knob is classified under Decorative Hardware and Moldings, so it is intended as a hand pull point on both cabinet doors and drawers.
The Amerock Valor matte black knob brings a defined 1-7/16 in (37 mm) length and slim 7/16 in (11 mm) width to cabinet doors and drawers, providing a compact, clear handhold without overwhelming the face. Its place in the Amerock Valor Series and Decorative Hardware and Moldings category ties it directly to visible cabinet work where finish consistency and part identification matter. Using the BP37320MB part number connects this specific knob to Amerock Corporation, supporting accurate specification on drawings and reliable matching in future phases. For projects calling for a matte black cabinet knob with known dimensions and a named series, this Amerock Valor knob offers a straightforward choice.