Karran Vineyard bathroom faucet is a single-hole, single-handle bathroom faucet designed for vanity use, so it suits typical residential bathroom sinks where a compact, streamlined fixture is preferred. Its bathroom faucet design fits the Bathroom Faucets product class, which keeps selection straightforward when matching to other bath fixtures in the same category. The faucet height of 8.62 inches provides clearance above the sink deck, which gives room for hand washing and basic grooming without the spout feeling cramped. A single-handle operation controls both hot and cold water, which speeds up everyday use because temperature and flow are adjusted in one motion. The faucet uses a 1.2 GPM flow rate, so it delivers water at a controlled rate that supports water-efficient operation in typical bathroom tasks. The KBF470ORB manufacturer part number clearly identifies this exact Vineyard model in oil rubbed bronze.
This single hole bathroom faucet mounts through a 1-3/8 inch diameter opening, so it is suited to vanity tops drilled for a single faucet hole rather than widespread or centerset patterns. The height of 8.62 inches keeps the faucet mass centered above the deck, which supports clean alignment with both drop-in and undermount vanity bowls. Standard US plumbing 3/8 inch connections are built into the design, so the faucet interfaces directly with typical 3/8 inch supply lines used under many bathroom vanities. The single-handle control is integrated into the body, which removes the need for separate hot and cold handles and keeps the installation footprint compact on the countertop surface.
This Karran single handle faucet is designed for bathroom vanities, so it fits residential and light-use bathroom spaces that need a compact, single-hole fixture. Its ideal use with drop-in vanity bowls means it suits sinks that sit partially above the countertop, keeping the spout positioned for comfortable reach over the basin. The same compatibility with undermount vanity bowls means it also works where the sink is mounted below the counter, giving a clean edge with the faucet rising directly from the deck. The Bathroom Faucets product class alignment keeps this model in the correct category for lavatory sinks, which simplifies matching it with drain and bowl styles intended for bathroom use. Its oil rubbed bronze finish supports bath designs where a darker, warmer metal tone is preferred to coordinate with matching drains, bath hardware, and cabinet pulls.
The 1-3/8 inch opening requirement defines the hole size for this faucet, which guides drilling on new vanity tops and clarifies fit when replacing an existing single-hole faucet with the same deck cutout. Standard US plumbing 3/8 inch connections provide a known interface for water lines, which keeps hook-ups consistent with common bathroom supply valves and reduces fitting mismatches. The faucet is NSF Approved, which indicates it meets recognized standards for plumbing products in typical bathroom environments. Low Lead Compliant construction further aligns it with regulatory expectations for potable water contact in bathroom fixtures. Solid brass construction gives the body and key components a robust base material, which supports long-term durability in the humid bathroom environment. A corrosion-resistant, fade-proof surface produced by the advanced finishing process maintains the oil rubbed bronze appearance over time, which helps keep the faucet looking consistent alongside other finished items in the room.
The Karran Vineyard bathroom faucet is ideal for use with drop-in and undermount vanity bowls, so it matches the most common bathroom sink configurations on standard vanity cabinets.
The KBF470ORB bathroom faucet is designed for a 1-3/8 inch diameter opening, which sets the cutout size when drilling a new vanity top or checking an existing deck hole.
The Karran single handle faucet uses one lever to control both hot and cold water, so temperature and flow are adjusted from a single control point on the faucet body.
The faucet has a 1.2 GPM flow rate, which delivers controlled water output suitable for typical hand washing while supporting water-efficient operation at the bathroom sink.
The Karran Vineyard bathroom faucet uses an oil rubbed bronze finish over solid brass construction, pairing a warm appearance with a durable base material for bathroom environments.
The KBF470ORB bathroom faucet is compatible with standard US plumbing 3/8 inch connections, so it mates with commonly used 3/8 inch water supply lines under many vanities.
The KBF470ORB bathroom faucet brings a single-hole, single-handle layout, a 1.2 GPM flow rate, and standard 3/8 inch connections together in one Bathroom Faucets model, which streamlines both selection and installation on typical vanity sinks. Its compatibility with drop-in and undermount vanity bowls broadens where it can be used in bathroom layouts. Oil rubbed bronze finish and solid brass construction combine appearance with durable materials. For projects calling for an NSF Approved, Low Lead Compliant faucet that fits a 1-3/8 inch deck opening, this Karran Vineyard bathroom faucet offers a focused solution.
Sold In: 1 Each