Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Karran Workstation 23 inch undermount sink defines a compact single-bowl workstation layout that supports efficient prep directly over the bowl. The sink is a Karran stainless steel workstation sink in the stainless steel sinks product class, giving installers a familiar material with added functionality. It is a single bowl undermount kitchen sink, so the bowl drops below the countertop and leaves edges ready for a clean solid-surface or stone reveal. The bowl size is 23 inches wide by 14 inches, which suits smaller kitchens while still leaving a usable work zone. An integrated smart ledge system is part of the WS-33-PK1 design, supporting sliding or resting tools along the ledge line to extend working space over the basin. A standard 3.5 inch drain opening size fits common kitchen drain fittings, keeping layout and rough plumbing straightforward.
This single bowl undermount kitchen sink is designed to fasten beneath the countertop, which leaves the 23 inch by 14 inch bowl fully open from above and supports easy wipe-down from counter to sink. The stainless steel sinks category construction in 16-gauge stainless steel gives the rim and bowl enough stiffness for a stable undermount edge line. A minimum cabinet size required of 24 inch sink base cabinet ties the WS-33-PK1 directly to a common base size, simplifying cabinet selection when planning the run. The standard 3.5 inch drain opening size lines up with typical kitchen strainers and waste fittings, so the drain location connects into conventional plumbing layouts without special drain sizing.
This Karran stainless steel workstation sink is well suited to compact kitchens or secondary prep zones where a 23 inch wide by 14 inch bowl still needs to pull full-duty tasks. The integrated smart ledge system places a ledge inside the bowl envelope, providing a defined support for tools directly over the basin. With the smart ledge system, the WS-33-PK1 keeps prep tasks above the drain area, so cuttings, rinsing, and drying can all stay centered over the bowl footprint. The 24 inch sink base cabinet requirement means the sink nests into a widely used base width, which works well in galley layouts or smaller L-shaped runs where cabinet space is at a premium. As a single bowl undermount kitchen sink, it leaves one open basin that suits washing larger pots while maintaining clean countertop lines around the cutout.
The premium 16-gauge T304 stainless steel construction on this workstation sink supports consistent wall and bottom thickness, which helps the bowl resist flexing when heavy cookware is set down. That same 16-gauge build keeps the undermount edge stable against the countertop, supporting an even reveal line around the cutout. Heavy-duty soundproof coating is applied across the sink body, so running water and garbage disposal vibration generate less ringing through the cabinet, which matters in installations near living spaces. Thick rubber padding further quiets dish impact, giving the workstation layout a more controlled sound profile in daily use. The standard 3.5 inch drain opening size keeps drain hardware selection straightforward, supporting quick matching to common basket strainers and waste assemblies. As part of the stainless steel sinks product class from Karran, the WS-33-PK1 provides a known material behavior under normal kitchen cleaning routines, which helps maintain appearance over time.
The Karran WS-33-PK1 workstation sink has a single bowl size of 23 inches wide by 14 inches, supporting full-duty kitchen tasks in a compact footprint.
The WS-33-PK1 workstation sink is specified for a minimum cabinet size required of 24 inch sink base cabinet, tying directly to a common base width.
The integrated smart ledge system creates a support ledge over the bowl, allowing work to take place directly above the sink area for efficient prep.
The WS-33-PK1 sink is made from premium 16-gauge T304 stainless steel, which provides strength and corrosion resistance for kitchen environments.
The Karran WS-33-PK1 uses heavy-duty soundproof coating and thick rubber padding to reduce vibration and noise from water and dishes hitting the bowl.
The workstation sink has a standard 3.5 inch drain opening size, aligning with common kitchen basket strainers and waste fittings for straightforward plumbing.
The Karran Workstation 23 inch undermount sink brings a single bowl undermount kitchen sink format together with an integrated smart ledge system, giving trades a defined work zone over a compact basin. Premium 16-gauge T304 stainless steel construction supports strength and corrosion resistance, while heavy-duty soundproof coating and thick rubber padding keep operation quieter in active kitchens. A standard 3.5 inch drain opening size and a minimum cabinet size required of 24 inch sink base cabinet align the WS-33-PK1 with common rough and cabinet dimensions. For projects calling for a stainless steel workstation layout in a smaller base, this model offers a focused, space-efficient option.
Sold In: 1 Kit
