Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Karran workstation 30 inch undermount sink is a stainless steel single bowl kitchen sink built for heavy daily use where a 30 inch wide undermount footprint is required. The sink is made from heavy-duty 16-gauge T304 stainless steel, which provides a thick, rigid bowl structure that stands up to impact in busy kitchens. Its stainless steel construction also resists corrosion, supporting long-term performance in wet, detergent-heavy environments. A minimum cabinet size requirement of 36 inch sink base cabinet defines where this model fits, helping layout planning for new builds or remodels. The sink uses a standard 3.5 inch drain opening, so it connects to typical kitchen drain fittings used in most installations. An integrated smart ledge system runs inside the bowl and supports sliding workstation components, turning the sink area into an active prep and cleanup zone. Sound dampening pads and coating on the bowl reduce noise and vibration from running water and dropped items, resulting in a quieter work area during service.
This undermount stainless steel sink is intended for installation beneath the countertop, which creates a flush interior edge that simplifies sweeping debris directly into the bowl during cleanup. The sink is specified for a minimum 36 inch sink base cabinet, so it occupies a known footprint in the cabinet run and supports predictable layout with adjacent drawers and doors. A standard 3.5 inch drain opening sits in the bowl floor, aligning with widespread kitchen drain fittings for straightforward trap and waste connection. Because the bowl is single and full-width at 30 inches, it offers open space for larger cookware in applications where a single compartment is preferred. The sound dampening pads and coating work with the rigid 16-gauge T304 stainless steel body to control resonance, so water flow, dish placement, and garbage disposal operation generate less disruptive noise.
This Karran stainless steel workstation sink fits kitchen layouts that can dedicate a 36 inch base cabinet to a 30 inch wide undermount sink. The heavy-duty 16-gauge T304 stainless steel bowl suits cooking environments that see frequent loading of heavy pots, pans, and trays, since the thicker gauge supports the basin against denting under typical handling. Because the sink is undermount, it is intended for countertop materials that accept an under-counter installation, creating a clean internal edge for wiping food scraps directly into the bowl. The standard 3.5 inch drain opening allows the sink to integrate with standard kitchen drains and disposal bodies, which is useful when aligning plumbing rough-ins with cabinetry. The single bowl configuration concentrates all capacity into one compartment, which benefits users who prefer uninterrupted space for sheet pans or stock pots without a divider.
The integrated smart ledge system built into this workstation sink creates an internal ledge that carries sliding prep components across the bowl, increasing usable workspace above the basin while still allowing washing and rinsing below. By shifting some tasks onto the ledge area, the sink footprint becomes a multi-level station that supports cutting, draining, and staging directly over the bowl, which can streamline movement between prep and cleanup. Sound dampening pads and coating are applied to the 16-gauge T304 stainless steel, which work together to absorb impact and vibration from water and dish contact, so the workstation function can operate at a lower noise level during extended use. The corrosion-resistant stainless steel maintains this performance over time, preserving both the structural rigidity and vibration control needed for a stable, quiet workstation sink in active kitchens.
The Karran workstation 30 inch undermount sink is specified for a 36 inch sink base cabinet, which defines the cabinet opening needed to position the 30 inch wide undermount bowl.
The WS-35-PK1 sink is made from heavy-duty 16-gauge T304 stainless steel, providing a thick, corrosion-resistant basin suited to frequent loading and washing.
The smart ledge system forms an internal support for sliding workstation pieces across the bowl, creating an elevated work area while leaving the sink open for washing and draining.
The Karran stainless steel workstation sink uses a standard 3.5 inch drain opening, allowing it to connect to typical kitchen drain and disposal assemblies.
The sink's sound dampening pads and coating reduce noise and vibration from water and dish contact, which helps keep surrounding kitchen areas quieter during busy use.
The WS-35-PK1 is a single bowl undermount kitchen sink, giving one full-width basin that accommodates larger cookware in applications favoring an uninterrupted compartment.
The Karran stainless steel workstation sink combines a 30 inch undermount single bowl layout, heavy-duty 16-gauge T304 stainless steel, and an integrated smart ledge system, so it suits projects needing a robust, low-noise prep and cleanup station over a 36 inch base cabinet. The standard 3.5 inch drain opening aligns with common plumbing components, which supports straightforward integration into typical kitchen drain configurations. For installations where a single, open basin and active workstation functionality are priorities, the WS-35-PK1 delivers a defined footprint and material specification tailored to that role.
Sold In: 1 Kit
