Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Fulterer 16 inch full extension drawer slide describes a 16 inch long, full extension side mount slide that lets the drawer travel the full length of the member, giving clear access to stored items in typical cabinet depths. The 75 lb rated slide supports drawers in applications where moderate loads are common, keeping motion controlled for everyday residential or light commercial use. Its self closing action pulls the drawer fully shut over the last portion of travel, helping drawers stay closed in regular use. The ball bearing design guides the movement along steel members, providing smoother travel than simple friction slides in cabinet and furniture projects. Being unhanded allows the same slide design to work on either side of the drawer, simplifying layout and reducing part differentiation on the job. The side mount configuration positions the slide on the drawer sides, which aligns with common cabinet construction and simplifies straight runs on casework.
The specified mounting space of 1/2 inch plus 1/32, minus 0 inch clearance each side sets a precise target for case opening and drawer width, which supports smooth movement and reduces binding during operation. Side mounting aligns the slide with the cabinet interior walls, giving straightforward screw runs and clear reference edges in both face-frame and European style applications. Bottom and side mounting holes on the drawer member let the installer fasten through either face or underside of the drawer side, adapting to different drawer box constructions while keeping the slide secure. The 32mm mounting holes on the cabinet member match common system hole spacing, which speeds layout in line-bored European style cases. Together, these details turn the slide into a predictable component within standard cabinet construction methods.
The slide is described as working perfectly in face-frame and European applications, so it suits both framed cabinets and frameless system-32 style casework. In framed cabinets, the side mount configuration lets the member tie into the interior wall behind the frame, helping keep drawer alignment consistent from front to back. In European frameless cases, the 32mm mounting holes on the cabinet member line up with system-32 drilling, so the slide positions accurately without custom layout. Quiet wheel language in the description, combined with the polymer wheel detail, indicates the wheel material is chosen to run quietly against the track, which supports low-noise operation in kitchen, bath, or office environments. The full extension action brings the drawer contents entirely out of the cabinet depth, allowing hardware, tools, or stored items to be accessed without reaching past the face of the case.
The polymer wheel for a lifetime of quiet, trouble-free performance works with the ball bearing design to guide the drawer with reduced friction, which helps drawers feel consistent across a bank of cabinets. The epoxy coated steel members create a matching smooth track surface for both bearings and wheel, so the slide glides more evenly over time in normal use. Single captive design keeps the drawer member engaged with the cabinet member during operation, which maintains alignment through the stroke. Positive stop prevents the drawer from over-traveling past the intended extension, protecting both the slide and the cabinet front from impact. The lift out disconnect with self closing action allows the drawer box to be removed when lifted at the disconnect point and then re-engaged, which aids shop assembly, finishing, and future service work while still giving the self closing pull at the end of travel. Together, these verified elements help maintain smooth movement and consistent close on every cycle.
The Fulterer 16 inch full extension drawer slide is 16 inches long and full extension, so the drawer travels out to roughly its full member length for easier access.
The slide is 75 lb rated, so it supports drawers carrying moderate loads commonly found in kitchen, bath, and utility cabinets while maintaining controlled movement.
The mounting space is 1/2 inch plus 1/32, minus 0 inch clearance each side, so cabinet openings and drawer widths can be sized to keep the slide running freely.
The drawer member has bottom and side mounting holes, allowing fastening through the side or underside of the drawer box to match different constructions.
The slide uses 1.2mm cold rolled steel with an epoxy coated finish in cream white, giving a slim yet strong profile with a smooth, light-colored interior appearance.
This drawer slide is ANSI/BIFMA tested and approved to Grade 1 requirements, indicating performance has been evaluated to a recognized industry standard for functional durability.
The Fulterer 16 inch full extension drawer slide pairs a 75 lb rating with ball bearing guidance and self closing action, fitting many everyday cabinet drawers that need smooth travel and a consistent close. Its defined mounting space and 1-1/2 inch height simplify planning cabinet openings, drawer box sizes, and stacked layouts in both face-frame and European style work. With 32mm mounting holes on the cabinet member and both bottom and side mounting holes on the drawer member, the slide fits neatly into system-32 shops and traditional builds alike. For projects built around cold rolled steel hardware with an epoxy coated cream white finish, this 7110 side mount option from Wurth Baer Supply aligns well with standard woodworking workflows.
Sold In: 4 Set
