Doellken Woodtape edge banding in the Terrarossa PM design gives cabinet and furniture projects a matching PVC Edge Banding solution, so exposed board edges gain a finished look that visually ties into Surteco USA Inc design WT9375-40-21015MM during fabrication work. The 15/16 x 1mm PVC edgebanding size covers typical 3/4 inch panel thickness with overhang, allowing trimming for a clean line along carcass sides, shelves, or doors. This edge banding is supplied as a 300FT/RL length under manufacturer part number 21015MM-B-1540-300, so shops can run multiple cabinets or a full job from a single roll, reducing changeovers while banding. As part of the Edgebanding & Surfacing category and Edge Banding product class, it fits naturally into standard casework workflows where PVC edges are preferred over raw board for appearance and handling comfort.
The 15/16 x 1mm PVC edgebanding format is sized so it can be applied to typical casework panels and then trimmed back, which supports clean edges on straight cabinet parts. The 1mm thickness gives a substantial edge profile compared with ultra-thin tape, which can benefit parts that see frequent handling in day-to-day use. Because this product is classified as PVC Edge Banding, it is intended for standard edgebanding application workflows on wood-based substrates. The 300FT/RL length means a single roll can be set up on edge banding equipment for multiple pieces in sequence, helping maintain consistent feed conditions from part to part on a run.
This Terrarossa PM PVC Edge Banding from Doellken Woodtape is positioned for woodworking applications where the designer or shop is working with a related Terrarossa PM surface, so the edges carry the same visual language as the faces. The 15/16 x 1mm sizing works with many cabinet and furniture panel formats that start from a nominal 3/4 inch thickness, giving enough extra width to trim both sides while keeping the Terrarossa finish concentrated on the edge. Because the product is sold as a 300FT/RL roll, a shop can stage one color on an edgebander and run through cabinet sides, shelves, and fronts that share the same Surteco USA Inc design WT9375-40-21015MM reference, maintaining a consistent appearance across different components within the same project.
The combination of 15/16 x 1mm PVC and a 300FT/RL length under part number 21015MM-B-1540-300 supports repeatable work by holding critical variables steady across a job. The width and thickness remain uniform along the roll, which lets equipment be dialed in once for a batch of parts that all use this Terrarossa PM edge. Because the Terrarossa PM name and Surteco USA Inc WT9375-40-21015MM reference tie the edge banding to a defined design, finished pieces can align with matching faces, helping installers and fabricators keep color and pattern coherence when assembling casework in the field. For shops that re-run successful projects, using the same manufacturer part number across orders preserves the same edge look from one production run to the next.
The 15/16 x 1mm PVC edgebanding size indicates width and thickness, giving coverage beyond typical 3/4 inch panels so the installer can trim back to a clean, straight cabinet or furniture edge.
The Terrarossa PM design references Surteco USA Inc WT9375-40-21015MM, so edge banding color and pattern align with that specific surface design when fabricating coordinated components.
The 300FT/RL roll length lets shops run multiple cabinets or furniture pieces in one setup, supporting longer production runs with fewer roll changes and more consistent processing conditions.
This Doellken Woodtape product is classified under Edgebanding & Surfacing as Edge Banding, signaling it is intended for treating exposed board edges in woodworking projects.
The manufacturer part number 21015MM-B-1540-300 identifies this specific 15/16 x 1mm Terrarossa PM 300FT/RL edge banding, which supports accurate ordering and consistent finish across jobs.
This Terrarossa PM PVC Edge Banding is supplied under the Doellken Woodtape brand, aligning it with their line of edge banding products for woodworking applications.
Doellken Woodtape edge banding in the Terrarossa PM design offers a 15/16 x 1mm PVC Edge Banding format that suits many cabinet and furniture edges tied to Surteco USA Inc WT9375-40-21015MM surfaces. The 300FT/RL length and defined manufacturer part number 21015MM-B-1540-300 support straightforward stocking and repeat ordering when the same Terrarossa look is needed on future projects. Selecting this Edge Banding from the Edgebanding & Surfacing category lets shops align exposed edges with coordinated faces on casework and furniture components.
Sold In: 300 Lineal Ft