Salice Self-Close Full Overlay Face-Frame;Frameless Hinges Titanium, 94° Screw-On - CNA7A66

Salice Series N Hinge For Thick Cabinet Doors

Salice Series N hinge is a concealed cabinet hinge designed for profile and thicker doors, so it supports door constructions that need more substance at the edge while keeping hardware hidden from view. This hinge provides a 94 degree opening angle, which lets the door swing wide enough for everyday cabinet access without over-travel that could stress the hinge arm or door edge. It is a self-close design, so the hinge pulls the door shut at the end of travel, helping doors seat consistently against the frame in regular use. The hinge is a full overlay style for face-frame or frameless applications, so it lets the door cover the cabinet side properly in overlay layouts. A titanium finish on the hinge presents a modern, neutral look that aligns well with a wide range of cabinet interiors.

Key Salice Self-Close Features For Daily Use

• The hinge is part of the Salice Series N line for profile and thicker doors, so it supports door designs that use profiled edges or added thickness where standard hinges may not align as well.
• The concealed cabinet hinge format keeps the hardware hidden when the door is closed, so cabinet faces stay clean while the hinge still provides full mechanical support at the cup and arm.
• A 94 degree opening angle lets the door swing away from the case enough for hand access while controlling travel, which helps reduce the chance of doors contacting adjacent cabinets in tight runs.
• The hinge is self-close, so as the door nears the closed position the hinge action draws it shut, helping doors return to a consistent resting position in repeat use.
• A full overlay design is intended for overlay applications, so the door can cover most of the cabinet front while the hinge geometry maintains proper gap and reveal.
• The titanium hinge finish provides a muted metallic tone, so interior hardware presents a consistent appearance alongside other titanium-colored Salice components.

Mounting Details For Salice Screw-On Hinge

This Salice self-close hinge uses a screw-on attachment style, so the hinge fixes directly to the door and mounting plate using screws in standard patterns. The cup is 12 mm deep, so it seats into a shallow bore in the door, which can be useful on thicker doors where material remains behind the cup. Possible drilling distance on the door, identified as K, ranges from 3 to 14 mm, so the hinge allows a range of cup setback positions to align overlays and reveals. The hinge is compatible with traditional Series 200 mounting plates and Domi snap-on mounting plates, so it mates with existing Salice mounting solutions in many cabinet runs.

How This 94 Degree Hinge Works In Cabinets

Using The Salice Series N Hinge On Thicker Doors

The Salice Series N designation identifies this hinge as suited for profile and thicker doors, so it supports door designs where the edge profile or added thickness might interfere with other hinge geometries. On these thicker doors, the 12 mm deep cup allows the bore to sit closer to the door face while still leaving good material behind the cup, which benefits long-term holding strength in dense or built-up doors. The hinge provides a full overlay function for cabinet fronts, so the door covers much of the cabinet face frame or side panel while relying on the hinge mechanics to maintain the designed overlay dimension. With a 94 degree opening angle, doors swing open far enough for efficient access to cabinet contents in kitchens, offices, or shop storage but do not open excessively into walk paths, which can matter in tight installations or corner runs.

Achieving Consistent Closing And Alignment Results

This Salice self-close full overlay hinge uses a self-close mechanism that engages as the door nears the cabinet front, so the door is drawn into contact without relying solely on user force. That self-close action helps keep door gaps uniform along a run of cabinets because each door finishes travel in a repeatable position against the frame or case side. The hinge uses a screw-on connection to the door and to the compatible mounting plates, so installers can adjust positioning by working at the screws while the core hinge geometry stays fixed. The possible drilling distance on the door (K) from 3 to 14 mm gives flexibility to set the cup location, so overlay and reveal can be tuned across different cabinet styles sharing the same hinge. Compatibility with traditional Series 200 mounting plates and with Domi snap-on mounting plates means this hinge can integrate into existing Salice plate systems, simplifying upgrades or standardization across jobs that already rely on those plate families.

Common Questions About Salice CNA7A66 Hinges

Selecting This Hinge For Thick Door Projects

The Salice Series N hinge with self-close action, full overlay function, and 94 degree opening angle offers a focused solution for profile and thicker cabinet doors. Its 12 mm cup depth and K drilling range from 3 to 14 mm give flexibility to position the hinge on varied door constructions while still hitting overlay targets. Compatibility with traditional Series 200 mounting plates and Domi snap-on mounting plates supports projects that already rely on Salice mounting systems. For cabinet runs built around thicker or profiled doors where a titanium concealed hinge suits the interior look, this Salice CNA7A66 hinge provides the geometry and interface details needed for consistent, repeatable cabinet performance.