Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice concealed hinge is built for thick-door inset applications on both face-frame and frameless cabinets, with a self-close spring, screw-on mounting, and a Titanium finish.
Inset doors sit inside the cabinet opening rather than over it, framed by a small, even gap on every edge. Getting that look right on a thick door takes a hinge built for the job: a larger cup that seats fully without breaking through, and arm geometry that clears the cabinet front as the door swings. The 40mm cup bores into the door, and the arm connects to a separate Salice base plate mounted to the cabinet, ordered separately. The 94 degree swing is the angle engineered to let a thick door clear the cabinet opening cleanly without collision. On a thinner or standard-thickness door, an overlay hinge in the standard size range is the correct pick.
The hinge is steel with a Titanium finish. In a frameless or face-frame run where the hardware sits behind the door face and is rarely seen, the Titanium tone reads as a neutral that does not compete with the cabinet interior. The self-close spring handles daily use without requiring a separate damper or catch to keep the door from drifting open. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm let the installer dial in the reveal after the plate is set, which matters on inset work where the gap is visible on all four sides.
Cabinet shops and finish carpenters fitting thick-door inset work on either frameless or face-frame boxes will find the 40mm cup and 94 degree angle take care of the clearance problem without a workaround. It suits custom furniture builds and architectural casework where the door is heavier or thicker than production standard and the inset look is the design goal. Screw-on mounting works on any cabinet, including those without pre-bored 5mm system holes, so it fits retrofit and custom work equally. Because Salice base plates are brand-specific, pair this hinge with the matching Salice plate for the cabinet construction you are working with.
The 94 degree angle is by design for thick-door applications. A thick door needs a reduced swing to clear the cabinet front without binding. The angle is the correct engineering for this use, not a limitation.
No. The hinge connects to a separate Salice base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to your cabinet type and construction.
The 40mm cup is larger than the 35mm cup used on standard-thickness doors. It seats properly in a thicker door without perforating the face, and the arm geometry is matched to the extra depth.
Yes. It works on both face-frame and frameless cabinets when paired with the appropriate Salice plate for each construction type.
When the design calls for flush inset doors on thick panels, this hinge delivers the cup size, swing geometry, and finish to get the job done cleanly on either cabinet type.
Sold In: 1 Each
