Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews M6 x 18mm flat head euro screw is a coarse-thread fastener designed for installing European cup hinges, drawer slides, and shelf hardware in line-bored 32mm system cabinet panels. At 18mm, this is the longer option in the family, suited to applications where additional thread engagement or thicker panel stock calls for more than a shorter screw can provide.
Most euro screw applications involve 5/8-inch to 3/4-inch (16mm to 19mm) melamine-faced particleboard or MDF panels. A 10mm or 12mm screw handles shallow line-bore installations cleanly, but when panels run at the thicker end of that range, or when a hinge baseplate or drawer slide bracket adds material between the mounting face and the panel, the 18mm length delivers the thread engagement the joint needs. Cabinet shops assembling boxes from 3/4-inch panels and installers fitting hardware on thicker case sides will find the added length earns its place in the fastener tray.
European cabinet hardware is almost universally installed with power drivers, and cam-out is the friction point that slows crews down and strips heads. The #2 Pozidriv recess addresses that directly: its parallel-flanked arms stay in contact with the bit under torque where a Phillips would begin to climb out. The nickel finish is a practical match for the zinc and chrome surfaces of most European hinge cups and drawer slide hardware, keeping the visible fastener heads from reading as mismatched in an otherwise finished cabinet interior. These screws ship in a 1000-piece box, a quantity sized for shops and installers running multiple cabinets per day rather than single-piece repairs.
Cabinet shops running European frameless construction will go through euro screws by the box. The 18mm length is the right call when the shop spec calls for 3/4-inch panel stock or when the hardware being installed uses a thicker baseplate that effectively shortens the screw's reach into the panel. Kitchen and bath installers fitting hinges and slides on-site will also find the length useful when panels have a laminate buildup or a thicker overlay that a shorter screw would not fully bridge. For shops that stock only one euro screw length, the 18mm sits at the useful end of the range: long enough for the thicker jobs, not so long it risks blowing through thin material.
The 18mm provides more thread depth in the panel. That matters when you are working with 3/4-inch (19mm) particleboard or MDF, when a hinge baseplate or slide bracket adds height between the mounting face and the panel surface, or when you simply want a more secure seat in denser engineered panels.
Yes. Euro screws use a blunt point and are designed for pre-bored 5mm line-bore holes in 32mm system cabinets. They are not self-starting and should not be driven into undrilled material.
A Phillips bit will physically fit the Pozidriv recess, but it is not recommended. The parallel flanks of the Pozidriv recess are designed for a Pozidriv bit. Using a Phillips driver increases the chance of cam-out and can damage the recess under power-tool torque.
This screw is sized for the 5mm line-bore holes used in standard 32mm system cabinetry. Confirm that the hardware mounting plates you are installing accept an M6 screw before ordering in volume, as some specialty fittings specify a different shank diameter.
No. The nickel finish on this screw is designed for interior cabinet applications. It is not rated for outdoor or high-humidity environments.
When panel thickness or hardware geometry calls for a euro screw that reaches further into the material, the Quickscrews 18mm M6 flat head in nickel delivers a Pozidriv drive, coarse thread, and flush-seating head in a production-friendly 1000-piece box.
Sold In: 1000 Each