47600 ARBOR 1/4" SHANK, 47600

Amana Tool 47600 Arbor For Router Grooving

Amana Tool 47600 arbor is a 1/4 inch shank arbor designed for slotting and trimming cutter assemblies, so it handles groove and tongue work in a router setup. This arbor supports groove edges for T-moldings, splines or biscuits, and other groove-based joinery, giving a single hub point for these edge operations. The arbor works with 2 and 3-wing slotting assemblies and with single 4-wing trim cutter assemblies, so one part serves multiple cutter styles on the router. A 5/16-24 NF diameter thread ties into the cutter stack, helping hold cutters in line with the router spindle. The 1/4 inch shank size fits routers built for that shank diameter, keeping the arbor matched to common light and medium-duty router collets. A cutting length of 2-3/8 inches provides reach for building typical groove depths along cabinet and panel edges without changing arbors mid-setup.

Key Arbor Details For Router Joinery Work

• The 1/4 inch shank connects this Amana Tool arbor to routers using that shank size, so it suits many handheld or table-mounted router bodies in cabinet and trim shops.
• The 5/16-24 NF diameter thread serves as the mounting interface for slotting and trim cutters, helping center the cutter stack so grooves track consistently along the workpiece.
• A cutting length of 2-3/8 inches supports deeper or multiple-pass grooving operations, so tongue-and-groove joinery and edge grooves for T-moldings can be routed along wider stock.
• Dimension B of 7/8 inch and dimension A of 1-1/4 inch define the arbor proportions around the cutter area, guiding setup clearances when arranging 2 or 3-wing slotting cutter stacks.

Router Arbor Setup For Controlled Slotting

This 47600 arbor works in a handheld or table-mounted router, so it covers both freehand and fence-guided routing approaches in the shop. The 1/4 inch shank engages fully in a matching collet, helping keep the slotting cutter assembly aligned during tongue-and-groove passes. A 5/16-24 NF threaded diameter mates with compatible cutter bodies, tying the wings directly to the arbor for smooth spinning during cut entry. The 2-3/8 inch cutting length allows edge grooves for T-moldings and splines to be routed along thicker parts without bottoming the assembly early. Dimensions A at 1-1/4 inch and B at 7/8 inch define how the cutter area sits relative to the shank, which supports consistent fence and height settings run after run.

Using This Arbor In Slotting And Trim Setups

Where The Amana Tool 47600 Arbor Fits Best

The Amana Tool 47600 arbor is specified for 2 and 3-wing slotting assemblies and single 4-wing trim cutter assemblies, so it fits directly into groove and trim setups built around those cutter styles. The 1/4 inch shank seats in routers designed for that shank diameter, which keeps this arbor suited to many shop routers used for cabinet and furniture components. With groove edges for T-moldings, splines or biscuits among its stated uses, the arbor works where edge grooves must track straight along parts such as panels, frames, and trim stock. The same arbor also supports routing tongue-and-groove joinery, tying the cutter stack and router together for repeated mating profiles on matching workpieces in a given run.

How Arbor Dimensions Support Repeatable Results

The 5/16-24 NF diameter thread on the Amana Tool 47600 arbor forms a keyed interface between the arbor and slotting or trim cutter bodies, so the wings sit centered for predictable cut paths. The 2-3/8 inch cutting length provides room for stacking the cutter and required spacing elements while still reaching into the work, which supports consistent tongue, groove, and edge slot depth across parts. Dimension A at 1-1/4 inch and dimension B at 7/8 inch define the working section that carries the cutter, so installers can arrange fence positions and height settings and return to them for repeat runs. Because the arbor is specified for 2 and 3-wing slotting assemblies and single 4-wing trim cutter assemblies, one part can stay in the router while cutters change, reducing setup changes between groove and trim passes.

Common Questions About This Amana Tool Arbor

Selecting The 47600 Arbor For Router Grooving

The Amana Tool 47600 arbor combines a 1/4 inch shank with a 5/16-24 NF threaded diameter and 2-3/8 inch cutting length, so it ties router, slotting cutters, and trim cutters into a single assembly. With stated uses covering T-molding grooves, splines, biscuits, and tongue-and-groove joinery, this arbor aligns with common cabinet and woodworking edge work. Specified fit with 2 and 3-wing slotting assemblies and a single 4-wing trim cutter assembly means one arbor can stay in service across several routing operations. For shops standardizing router setups around these assemblies, choosing the 47600 arbor keeps dimensions and interfaces consistent from job to job.