Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amana Tool bevel trim router bit is a steel bodied, carbide tipped bit designed for bevel trimming laminate with a standard router, so laminate edges can be shaped cleanly in one controlled pass. The 22 degree cutting angle is set for bevel trimming, which creates a consistent angled edge that helps finished panels seat neatly against adjoining surfaces. The bit uses a two-flute cutting design, so each revolution shears more evenly and reduces cutting marks on laminate edges. The 13/32 inch cutting diameter establishes the cut width, giving predictable clearance for common laminate edge profiles. A cutting height of 9/32 inch defines the maximum laminate thickness that can be trimmed in one pass, keeping cuts within a stable engagement range. The 15/16 inch overall length keeps the bit compact in the collet, which supports steady control when working along cabinet sides, tops, and cutouts.
The 1/4 inch shank size is specified for this bevel trim router bit, so it seats in standard 1/4 inch router collets used on many laminate trimming routers. With the shank at 1/4 inch and the overall length at 15/16 inch, the working portion stays close to the collet, which supports controlled handling when following edges or guiding along a template. The steel body construction holds the 22 degree carbide bevel in a fixed relationship to the shank, so once the bit is secured at the desired projection, the cutting edge tracks at a consistent height along the laminate edge. The 13/32 inch diameter also defines the clearance needed around guides or bearings on compatible tool setups, giving installers a clear sense of the working envelope at the tip.
This router bit is specified for bevel trimming laminate with a standard router, so it fits laminate edge finishing tasks on countertops, cabinet doors, side panels, and cutouts. The 22 degree bevel angle is suited to creating a defined chamfered edge, which can visually break the transition between laminate face and edge band. On straight runs, the 13/32 inch cutting diameter gives a clear cutting path that supports predictable contact along the full edge length. Around cutouts, such as sink or cooktop openings in laminated tops, the same diameter and cutting height allow installers to follow curves while staying engaged in the laminate layer. The 9/32 inch cutting height matches typical laminate and substrate edge engagement, so trimming passes can be planned around that depth when routing along templates or straightedges.
The steel bodied, carbide tipped construction is built so vibration is reduced, which supports the smoothest cut possible from a two-flute bit in normal use. Lower vibration helps the two flutes share the cutting load more evenly, so the 22 degree bevel stays clean along the full cutting height. The compact 15/16 inch overall length keeps the bit mass close to the router bearings, which supports accurate tracking when making repeated passes on multiple parts. With the diameter fixed at 13/32 inch, jigs and guides can be dimensioned around that cutting circle, giving installers a reliable reference when setting offsets or making patterns for laminate work. The 1/4 inch shank specification standardizes how deeply the bit seats in the collet, so once a projection is chosen, the relationship between shank, bevel angle, and cutting height can be repeated across jobs.
This bevel trim router bit is described for use with a standard router, so it fits common routing setups used in laminate trimming work.
The Amana Tool 51600 bit is described for bevel trimming laminate, so it is suited to shaping laminate edges and cutouts during finishing stages.
The 22 degree bevel angle shapes the laminate edge into a consistent chamfer, which creates a defined transition that can improve the finished appearance of panels and tops.
The 1/4 inch shank matches standard 1/4 inch router collets, so the bit can be mounted securely in many laminate trim routers used on site or in the shop.
The two-flute design balances the bit during rotation and supports reduced vibration, which helps produce smoother laminate edges along both straight and curved cuts.
The 9/32 inch cutting height limits how much laminate and substrate are engaged per pass, which keeps the bit working within a stable depth for edge finishing.
The Amana Tool bevel trim router bit combines a steel body, carbide tipped cutting edges, a 22 degree bevel, and a 13/32 inch diameter to support controlled bevel trimming of laminate with a standard router. With a 1/4 inch shank, 9/32 inch cutting height, and 15/16 inch overall length, it is dimensioned for stable edge work on laminated parts. For laminate fabricators and installers who want a defined bevel on edges and cutouts, this bit offers a matched geometry that supports repeatable trimming results across multiple components.
Sold In: 1 Each