Edge Forming Ogee Fillet with Ball Bearing Guide 2-Flute 5/32" Radius, 1-3/8" Dia, 1/2" Height, 1/2" Shank, 2-1/2"Length

Amana Ogee Fillet Router Bit For Edge Profiles

Amana Tool ogee fillet router bit shapes a decorative edge while controlling the cut with a ball bearing guide. The bit belongs to the edgeforming router bits class, so it is built for routing detailed edges on workpieces. The open pattern has a step at the end of the concave portion of the curve, which defines a crisp transition in the profile that helps edges read cleanly on finished parts. Using the optional 3/8 inch bearing produces a profile with a fillet at the convex end of the curve, giving another distinct edge detail from the same tool and reducing tool changes during a job. The bit has a 1-3/8 inch diameter that engages a wide enough section of the edge to create a noticeable molding-style profile in one pass.

Key Edgeforming Details That Support Your Work

• The router bit has a 5/32 inch radius that forms a controlled curve, which helps create a consistent ogee contour that matches repeat parts across a run.
• The bit uses a ball bearing guide that rides the edge of the stock, helping the profile track straight along the workpiece without separate fences in many setups.
• This edgeforming bit is described as 2-flute, so it presents two cutting edges to the work, promoting smoother cuts that reduce sanding on typical routed edges.
• The cutting height is 3/4 inch, allowing the bit to form a substantial vertical profile on thicker edges where a pronounced molding detail is needed.
• The overall length of 2-1/2 inch helps the bit fit typical router collets while providing reach for edge work in both handheld and table mounted routers.

Installation And Fit Details For This Router Bit

The bit has a 1/2 inch shank, so it fits routers that accept a 1/2 inch collet and provides a solid grip for edgeforming passes. The cutting height of 3/4 inch works with stock edges where that vertical space is available, letting the full ogee fillet detail show on cabinet or furniture parts. The overall length of 2-1/2 inch gives enough projection for handheld router passes while still being manageable in table mounted router setups. Using the bit in either hand held or table mounted routers lets it adapt to different shop workflows, whether the workpiece is moved to the bit or the router is guided along installed parts.

Using The Ogee Fillet Bit In Real Projects

Where This Edgeforming Router Bit Is Applied

This Amana Tool router bit is categorized under edgeforming, so it is intended for shaping edges rather than joinery or grooving. The 1-3/8 inch diameter engages the rim of the workpiece to cut a decorative molding-style edge on parts such as panels or frames where the full profile can show. The 5/32 inch radius sets the curvature of the concave section, which determines how tight the visual scoop appears along the edge. The open pattern has a step at the end of the concave portion of the curve, adding a small ledge that sharpens the transition line and helps edges catch light in a defined way on finished components. Using the optional 3/8 inch bearing produces a profile with a fillet at the convex end of the curve, so the outward roll of the edge gains a flat band that reads as a separate detail in the molding.

Profile Details That Support Repeatable Results

The ball bearing guide on this router bit controls the lateral position of the cut by running against the workpiece edge, which helps keep the ogee fillet profile consistent from part to part during production runs. The 2-flute configuration spaces two cutting edges around the bit, providing balanced cutting that supports smoother surfaces when feed rates and router settings are matched to the material. The 3/4 inch cutting height defines how much vertical detail the bit can place on an edge, which helps you plan whether a full-depth pass or staged passes are best for a given thickness. The 1/2 inch shank offers a robust interface with the router collet, which supports stability during edgeforming passes in both handheld and table mounted routers where vibration control is important.

Common Questions About This Ogee Fillet Bit

Select This Ogee Fillet Bit For Edge Projects

The Amana Tool ogee fillet router bit with ball bearing guide provides an edgeforming profile defined by a 1-3/8 inch diameter and 5/32 inch radius, so it supports detailed molding-style edges. With a 3/4 inch cutting height, 1/2 inch shank, and 2-1/2 inch overall length, it fits common router setups for both handheld and table mounted use. For jobs that call for either a stepped concave edge or a fillet at the convex end of the curve, this 54112 bit offers both profile options through its open pattern and optional 3/8 inch bearing setup.