Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
double door floor guide keeps a pair of sliding doors running in line at the floor, so the doors travel in a controlled path instead of wandering. This Hettich America Corporation floor guide is designed for 1-3/4 inch thick doors, so it matches a common door thickness used in many sliding openings. The guide is part of builders hardware sliding door hardware, so it works as the lower guiding element beneath an overhead track system. The component is identified as manufacturer part 50105, so it can be matched directly to drawings, takeoffs, or past projects using the same number. As a floor-mounted guide, it works with the bottom edge of the doors to manage side play and maintain separation between the two panels while they slide.
This sliding double door floor guide is part of a sliding door hardware assembly, so it works with an overhead track to manage the lower end of the doors. Its steel construction provides a firm anchor point at the floor line, so once the guide is fastened down, the doors have a repeatable channel to travel through. The design with nylon covered uprights means the doors bear against non-metallic contact points, so the interaction at the floor edge favors smoother movement compared to bare metal contact. Because the guide is sized for 1-3/4 inch thick doors, the door edges seat between the uprights in a way that balances clearance and support, which is useful when aligning door reveals along the opening.
This double door floor guide is used at the bottom of a pair of sliding doors, so it creates a channel for the doors to move through at floor level. It belongs in the builders hardware and sliding door hardware category, so it is suited to installations where a track and guide system controls the doors instead of hinges. In a typical layout, the overhead hardware carries the door weight while this Hettich 50105 floor guide keeps the door bottoms aligned, so the doors stay parallel as they travel. Because it is intended for 1-3/4 inch thick doors, it fits door edges of that thickness so the doors stay captured side to side while still able to move along the opening.
The steel body of the floor guide gives the component structural stiffness, so under repeated sliding cycles the uprights remain positioned to keep the doors tracking straight. Nylon covered uprights offer a contact surface that interacts gently with the door edges, so when doors pass through the guide, the sliding action is supported by a combination of rigid guidance and smoother contact. The double door configuration means the guide is prepared to manage two door panels in one location, so the relative spacing between the doors at the floor can be maintained. By matching the guide to 1-3/4 inch thick doors, the door edges sit properly between the uprights, so the doors are neither overly tight nor excessively loose in the guide path.
This double door floor guide is for sliding doors that are 1-3/4 inch thick, so it supports door panels built to that thickness within a sliding track system.
The steel construction gives the floor guide a rigid base, so under repeated sliding the uprights stay aligned and continue to hold the doors in a consistent path.
The nylon covered uprights provide a smoother contact surface for the door edges, so sliding movement is supported with reduced friction at the floor guide.
The double door floor guide sits at floor level under the sliding doors, so it defines the lower channel while an overhead track directs the top of the doors.
Hettich 50105 is the manufacturer part number for this floor guide, so it ties directly to project specifications and reorder documentation.
This guide is part of builders hardware sliding door hardware, so it fills the floor-guiding role when laying out a complete sliding door assembly.
This sliding double door floor guide from Hettich America Corporation is identified as part 50105 and set up for 1-3/4 inch thick doors, so it matches projects using that door size. The steel body with nylon covered uprights gives a combination of rigidity and smoother contact that supports steady sliding movement at floor level. For sliding door hardware layouts that call for a defined floor channel for two door panels, this guide provides a dedicated component from the builders hardware sliding door hardware class.
Sold In: 1 Each