
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Concealed Shelf Support for 2" Thick Shelves is a Selby Furniture Hardware fitting designed to attach a shelf to a wall with no visible support, creating a clean floating look while the structure stays hidden in the wall and shelf. This concealed shelf support works with shelves that have a minimum thickness of 7/8", so installers can use common shelf sections while keeping enough material around the support rod for strength in service. The fitting supports a shelf depth of 8" from front to back, giving a clear guideline for shelving projects in closets, garages, or living areas where consistent projection matters. Two supports are rated for 90 lb loads and three supports are rated for 135 lb loads, so installers can plan support spacing around expected loads for storage or display. The KTENTI3 part number identifies this specific concealed shelf support within the Selby Furniture Hardware range.
This concealed shelf support relies on the minimum shelf thickness of 7/8" to house the support rod, so fabricators can drill or route into solid shelf stock while maintaining wall-side strength. The 8" shelf depth specification aligns the shelf projection with the internal support engagement, which keeps the leverage on the wall bracket predictable in service. The rated loads of 90 lb with two supports and 135 lb with three supports give installers defined capacity steps as they add supports under wider or heavier shelving runs. By operating as a concealed fitting in the Floating Shelves and Concealed Brackets category, this KTENTI3 support integrates into storage layouts that prioritize uninterrupted shelf lines along the wall.
The KTENTI3 concealed shelf support from Selby Furniture Hardware uses one mounting bracket and one support rod to create the hidden connection between the wall and the shelf, so the visual emphasis stays on the shelving surface rather than the hardware. When used with shelves at least 7/8" thick, the rod sits inside the shelf body while the bracket anchors to the wall, which keeps the structure internal and protects the connection from casual impact along the shelf edge. The defined shelf depth of 8" from front to back means the shelf projection is planned around the support geometry, allowing closet, garage, or general storage layouts to run parallel lines of shelving at a consistent depth along a wall.
This concealed shelf support provides clear load rating steps of 90 lb when two supports are used and 135 lb when three supports are used, so installers can match the number of supports to the intended contents of the shelf span. These specified ratings help plan support placement under shelves that carry books, folded clothing, or general storage items, reducing guesswork about how many concealed fittings to distribute along the wall. The minimum 7/8" shelf thickness pairs with these ratings by maintaining material around the embedded rod, which supports consistent performance across multiple installations using similar shelf stock. As part of a Floating Shelves and Concealed Brackets system, this Selby Furniture Hardware fitting supports repeatable layouts where every shelf shares the same concealed connection approach and known load range.
This concealed shelf support is specified for a minimum shelf thickness of 7/8", which allows the support rod to sit inside the shelf while leaving enough material to carry typical storage loads.
This Selby concealed shelf support is designed for shelves with a front-to-back depth of 8", aligning the shelf projection with the internal support geometry and wall engagement.
This concealed shelf support is rated for 90 lb loads when two supports are used and 135 lb loads when three supports are used, giving clear planning points for shelving spans.
This KTENTI3 concealed shelf support is listed under Floating Shelves and Concealed Brackets, making it suitable for closet, garage, or general storage projects that require hidden supports.
This fitting uses a wall-mounted bracket and a support rod hidden inside the shelf, so the shelf appears to float on the wall without any visible brackets or external supports.
The KTENTI3 part number identifies this specific concealed shelf support from Selby Furniture Hardware, helping buyers match catalog descriptions and order the same fitting again.
This concealed shelf support for 2" thick shelves provides a hidden wall-to-shelf connection using a mounting bracket and support rod, so floating shelf layouts stay visually clean. With a minimum 7/8" shelf thickness, an 8" shelf depth specification, and defined ratings of 90 lb with two supports and 135 lb with three supports, it offers clear parameters for planning storage or display runs. For projects that rely on Floating Shelves and Concealed Brackets, this Selby KTENTI3 fitting delivers a consistent concealed support approach across multiple shelving locations.
Sold In: 1 Set