Aluminum interlocking long wall clip provides a secure way to hang cabinets or panels by using mating Z-shaped profiles, so the load rests on interlocking aluminum rather than on visible brackets. The 72 inch length lets you span wide cabinets or long panels with a single continuous strip, which helps spread weight evenly along the wall. The overall 1-7/8 inch width gives a broad bearing surface, supporting stable engagement between wall and panel. The clip is made of aluminum, so the interlocking faces remain rigid under normal cabinet and panel loads while keeping weight low for easier handling on site. A x B dimensions of 0.500 inch A by 0.250 inch B define the interlock geometry, so you get a repeatable fit between wall clip and mating hang clip on every installation. This part functions as a long wall clip within the panel assembly fittings family.
The long wall clip attaches to the wall, so it establishes the fixed reference line that cabinets or panels will hang from. The short hang clip attaches to a cabinet or panel, so the panel-side hardware is set up to mate directly with the wall clip. EA5338-3 and EA5339-72 are intended to mate with each other, so when the panel is lifted into place the two profiles interlock and transfer the load from the cabinet or panel into the wall. The 72 inch length of the wall clip lets installers align multiple hang clips or a continuous panel edge along a single straight line, which supports accurate level runs across adjacent units.
This 1-1/4 inch by 72 inch aluminum interlocking long wall clip is used wherever a cabinet or panel needs to be hung from a wall using mating clips, because the wall piece provides the fixed support component. As a panel assembly fitting in the Z-clips category, it fits into hardware layouts where a panel or cabinet back carries a corresponding short hang clip that drops into the wall-mounted strip. The long wall clip attaches directly to the wall, so it serves as the structural interface between building framing or wall material and the removable panel or cabinet assembly. Installers working with Paramount Extrusions Company part number 5339-6MNH gain a defined geometry for the wall side of the connection, which keeps the hanging system consistent across multiple units using the same clip profile.
The A x B interlock dimensions of 0.500 inch A by 0.250 inch B give this Paramount Extrusions Z-clip a consistent profile, so each matching short hang clip engages the wall clip in the same way, which supports repeatable panel positioning. Because EA5338-3 and EA5339-72 are intended to mate with each other, installers using that pair know the panel-side and wall-side profiles are engineered to work together as a system. The overall 1-7/8 inch width creates a stable front-to-back bearing surface, so once the cabinet or panel is seated on the wall clip, lateral and vertical alignment are held by the formed aluminum faces rather than relying only on point contacts. The 72 inch aluminum wall clip spans long cabinet or panel edges, so fewer separate mounting points are needed along the run, which reduces layout variation between individual fasteners and supports cleaner visual alignment.
The 72 inch aluminum long wall clip provides a continuous mounting surface across much of a cabinet or panel width, which helps distribute load evenly and supports straighter, more uniform installations.
The long wall clip attaches to the wall and the short hang clip attaches to a cabinet or panel, so when joined, the panel hangs from the interlocking aluminum profiles.
This wall clip is identified as EA5339-72 and is intended to mate with EA5338-3, so together they form a panel-to-wall hanging system using matching Z-shaped profiles.
The 1-7/8 inch overall width gives the wall clip a broad contact area, so it supports stable engagement with the mating hang clip and provides room for secure wall fastening.
The 0.500 inch A by 0.250 inch B profile defines the interlock geometry, so every compatible hang clip seats the same way, giving consistent fit and repeatable hanging alignment.
This long wall clip is made of aluminum, so the interlocking profile combines rigidity with relatively low weight, which supports accurate engagement while remaining manageable during handling.
This Paramount Extrusions Company 1-1/4 inch by 72 inch aluminum interlocking long wall clip serves as the wall-mounted half of a Z-clip system, so it anchors cabinets or panels using a defined aluminum profile. With overall 1-7/8 inch width, 72 inch length, and 0.500 inch by 0.250 inch A x B geometry, it delivers a consistent mounting interface for panel assembly fittings work. When paired with its intended mate EA5338-3, it forms a complete hanging solution for cabinets or panels that rely on interlocking aluminum faces for support. Use this 5339-6MNH wall clip wherever a continuous, profile-controlled connection between wall and panel is required.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  EA5339-3 Mfr# 5339-C | 5339 3” x 1-1/2” Aluminum Interlocking Short Hang Clip | ||||
Sold in: 1 Each |  EA5338-3 Mfr# 5338-C | 3” x 1-1/2” Aluminum Interlocking Panel Z Clip, Short Hang Clip | ||||
Sold in: 1 Each |  EA5338-72 Mfr# 5338-6MNH | 72" x 1-7/8" Aluminum Interlocking Panel Z Clip |