Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Stainless Steel Countertop Edge Molding 6 FT is stainless steel edge molding from Dave Sanders and Company designed for 1-1/2 inch thick countertops, so the molding locks onto standard countertop thickness and protects a vulnerable front edge. The 1-1/2 inch inside dimension matches the countertop thickness, helping the profile seat snugly over the edge for clean alignment during installation. A 1-5/8 inch outside dimension wraps slightly beyond the thickness, giving a finished metal face that shields the front edge from everyday bumps and contact. The 9/16 inch depth defines how far the molding extends down the countertop edge, which sets the visible reveal and helps coordinate with adjacent cabinetry or panels. The 6 foot length covers long runs in a single piece, which reduces joints along the edge and keeps the line straighter on installation.
The stainless steel edge molding is suitable for 1-1/2 inch thick countertop edges, so layout starts with a substrate that matches the 1-1/2 inch inside dimension for a proper grip. That inside dimension is set to seat over the edge, guiding the molding into position without guesswork on thickness. With a 1-5/8 inch outside dimension, the installer knows how far the metal face will project, which helps plan overhang and clearance at adjoining components. The 9/16 inch depth sets the vertical reach along the edge, so the molding can be planned to meet door and drawer front lines. The 6 foot length supports installation along longer stretches of countertop, reducing alignment work at seams.
This stainless steel edge molding is suitable for the edges of 1-1/2 inch thick countertops, so it fits work where the build-up or core brings the finished edge to that thickness. The 1-1/2 inch inside dimension is designed around this edge, allowing the profile to slide over the substrate and register squarely without custom re-dimensioning of the molding. With a 1-5/8 inch outside dimension, the molding provides a stainless band that slightly exceeds the thickness, which visually frames the top while protecting the front line of the counter. The 9/16 inch depth defines the vertical face, so the molding can be coordinated with drawer fronts or cabinet doors to keep lines consistent across the installation.
The combination of 1-1/2 inch inside dimension and 1-5/8 inch outside dimension gives a clear profile for planning cuts and joints, so measurements can be repeated across multiple countertop sections. Because the inside dimension matches the 1-1/2 inch countertop thickness, each piece of molding seats to the same reference point, reducing variation from one run to the next. The 9/16 inch depth provides a fixed vertical coverage, which helps installers keep reveals consistent when working across banks of cabinets or along a long continuous counter. The 6 foot length minimizes the number of seams, which cuts down on time spent aligning miters or butt joints and supports a straighter finished line. As a metal edge molding, this profile also adds a defined stainless face at the front of the countertop, giving a durable-feeling edge where the surface sees frequent contact.
This stainless steel edge molding is suitable for the edges of 1-1/2 inch thick countertops, so it is sized for tops built to that finished thickness.
The molding has a 1-1/2 inch inside dimension, a 1-5/8 inch outside dimension, and a 9/16 inch depth, which together define its grip and visible coverage on the countertop edge.
This stainless steel edge molding is 6 feet long, allowing extended countertop runs to be finished with fewer joints along the edge.
This product is stainless steel edge molding, so the front edge of the countertop is finished with a stainless steel surface.
The 9/16 inch depth controls how far the molding extends down the edge, helping align the stainless face with adjacent doors or panels.
The manufacturer part number is SS806B-6, which identifies this specific stainless steel countertop edge molding profile.
This stainless steel edge molding from Dave Sanders and Company pairs a 1-1/2 inch inside dimension with a 1-5/8 inch outside dimension and 9/16 inch depth, so it is set up for 1-1/2 inch thick countertops that need a defined stainless front edge. For runs up to 6 feet, the single-piece length supports cleaner lines and fewer joints along the front of the counter. When a job calls for metal edge moldings sized around a 1-1/2 inch countertop build, this profile offers a clear, repeatable set of dimensions to work from.
Sold In: 1 Each