LID SUPPORT, 250MM For Controlled Flaps

LID SUPPORT, 250MM is a telescopic lid support from Hafele America Company designed to control flap movement on cabinets with interior heights between 11-13/16 inches and 15-3/4 inches, so flaps travel in a predictable range on upper or work-surface cabinets. The 9-13/16 inch long unit spans that interior height range, allowing one support size to cover several common cabinet dimensions in shop-built or manufactured casework. Braking action operates in the down position only, so the flap slows as it closes, helping reduce slamming at the end of travel on storage or work access lids. The braking action is adjustable by turning the plunger rod, giving installers a way to fine-tune resistance to match flap weight and user preference. Finish is nickel plated, which presents a clean metal appearance that pairs well with typical cabinet hardware finishes in commercial or residential projects.

Key Lid Support Details For Cabinet Projects

• The telescopic action design manages flap movement through its stroke, which helps keep motion controlled when opening and closing upper or horizontal cabinet fronts.
• Braking action operates in the down position only, so the support primarily slows closing movement, which helps protect the cabinet structure and front from hard impacts.
• The braking action is adjustable by turning the plunger rod, allowing on-site tuning so the same hardware can be set for different flap sizes or material weights.
• The unit is 9-13/16 inches long, matched for cabinet interior heights from 11-13/16 inches to 15-3/4 inches, so one part number covers a clear height band during layout.
• Finish is nickel plated, which offers a neutral metallic look that coordinates with many hinge and handle finishes often used in cabinetry.
• The support belongs to the Lid Supports and Stays product class, making it suitable where controlled lid or flap motion is part of the cabinet hardware plan.

Mounting And Adjustment Details For This Lid Stay

This lid support mounts to the side panel via a circular screw-on plate, so the load transfers directly into the cabinet side during flap movement. That side-panel mounting arrangement keeps the hardware out near the cabinet wall, leaving the interior more open for storage layout or equipment. The support can be used for either overlay flaps or inset flaps, so the same model can be applied across different front construction approaches in a project run. It is reversible for left hand or right hand use, which simplifies ordering and stocking, because one part can be installed on either side of the cabinet. The adjustable braking, controlled through the plunger rod, lets installers dial the action after the flap and front hardware are fitted.

Using This Hafele Lid Support In Real Installations

Where This 9-13/16 Inch Lid Support Fits Best

This Hafele America Company lid support functions within cabinet interior heights from 11-13/16 inches to 15-3/4 inches, so it aligns well with mid-height wall cabinets, lift fronts, or horizontal flaps in that clear opening range. Because the support length is 9-13/16 inches, the geometry is tuned to that specific interior height band, helping the flap travel cleanly without binding when located according to typical mounting patterns. The product sits in the Lid Supports and Stays category for work surface and tables, so it suits applications where a flap or lid needs controlled motion in vertical or horizontal mounting orientations. In use, the telescopic action provides a compact profile near the cabinet side, which helps preserve usable interior space beneath or behind the moving front.

How Mounting And Braking Support Repeatable Results

The circular screw-on plate at the side panel mounting point gives a defined contact area on the cabinet wall, which supports repeatable placement along production runs of similar cases. Using a reversible design that works left hand or right hand means the same part number can be mirrored on opposite sides, reducing variation in hardware choices during larger installations. Because the braking action operates in the down position only, installers can predict how the flap will behave as it closes, which helps align this support with hinges or other stays that guide the same front. Adjustable braking through the plunger rod allows gradual changes to closing resistance, so installers can match the feel to door size without swapping components. The finish being nickel plated also supports consistent visual alignment with many hinge systems, which is useful when cabinets are open and internal hardware is visible.

Common Questions About This Hafele Lid Support

Choose This Lid Support For Controlled Flap Motion

The nickel plated LID SUPPORT, 250MM from Hafele America Company combines telescopic action, down-position braking, and an adjustable plunger rod in a single unit sized for 11-13/16 inch to 15-3/4 inch cabinet interior heights. Side panel mounting through a circular screw-on plate, plus suitability for overlay or inset flaps, lets this support serve varied cabinet layouts with one consistent geometry. The reversible left or right use simplifies planning for mirrored cabinets. For projects needing controlled flap motion within this specific height range, this lid support offers a focused solution.