Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Router bit undercut describes this Amana Tool solid surface router bit designed to shape full bull-nose edges without flipping heavy stock. The round under profile with upper ball bearing lets you work from one face, which matters on large tops and panels. This router bit is built as a 2-flute design, so it shears solid surface cleanly, helping reduce sanding on finished edges. A 2-5/8 inch diameter cutting circle supports broad, even contact on the profile, which keeps the bull-nose consistent along long runs. The 1/2 inch shank provides a solid grip in routers that accept this size, which supports smoother tracking during passes. Overall length is 3 inches, giving compact control for handheld routing. This bit belongs to the solid surface category, matching jobs on countertops and similar materials where edge accuracy is important.
This round under router bit uses a 1/2 inch shank, so it fits routers and collets sized for that dimension, which supports stable mounting for edge forming. The bit is intended for use with corner rounding bits to cut a full 180 degree bull-nose on 1/2 inch, 1 inch, 1-1/2 inch, or 2 inch thick stock, which streamlines creating matching top profiles. The Ultra-Glide Delrin sleeved ball bearing guide lets the router run along the workpiece face, providing a mechanical reference for the cut instead of relying only on fences. Overall length of 3 inches keeps the cutting geometry close to the collet, supporting control on handheld passes along long countertops. The bit is also described as useful for onsite cutting where a conventional round-over cannot be used, which addresses field modifications without moving large slabs back to the shop.
This Amana Tool router bit is classed under solid surface, so it aligns with countertop, vanity, and similar fabricated tops where clean bull-nose edges are specified. The ability to cut a full 180 degree bull-nose on 1/2 inch, 1 inch, 1-1/2 inch, or 2 inch thick stock fits common laminated build-ups and single-layer tops, which reduces tool changes when working through a project list. The web description notes that two 30 inch by 98 inch by 1/2 inch laminated sheets equal 200 pounds plus, and this bit lets that type of stock be profiled without turning the material over, which matters when pieces are too heavy or awkward to flip safely. Working from one face with the upper ball bearing guide gives a consistent reference, supporting straight, even edges down the length of solid surface runs. Being a router bit within the bits, blades and cutters category, it fits into established solid surface fabrication workflows where routing shapes the final profile before finishing.
The 2-flute cutting layout on this round under router bit balances chip removal and surface finish on solid surface materials, which benefits seams and visible front edges that need minimal touch-up. A 2-5/8 inch diameter combined with 1-1/2 inch cut depth and 3/4 inch radius is configured to generate the 180 degree bull-nose shape described, which removes guesswork about matching radius and thickness. The 1 inch cutting height keeps the working section compact, so the bit engages only the depth needed for the profile, supporting controlled passes along vertical faces. The Delrin sleeved ball bearing guide is described as Ultra-Glide non-marring, meaning it is designed to roll smoothly on the substrate while resisting marking, which helps preserve prefinished or decorative faces adjacent to the cut. The 1/2 inch shank tied to a 3 inch overall length creates a short lever arm between collet and cutting edge, which supports smoother tracking on solid surface edges during handheld routing runs on site or in the shop.
This router bit is listed in the solid surface category, so its geometry and bearing guidance are oriented toward routing solid surface tops and similar sheet goods where shaped edges are required.
This solid surface router bit forms a full 180 degree bull-nose on 1/2 inch, 1 inch, 1-1/2 inch, or 2 inch thick stock, which covers common countertop and laminated build-up thicknesses.
The upper ball bearing guide rides against the work surface and sets the profile position, which stabilizes the cut and supports consistent edge geometry along long runs.
The 57140 router bit has a 1/2 inch shank, which provides a sturdy connection in routers with matching collets and supports smoother, less chattery edge passes.
The Delrin sleeved bearing is described as Ultra-Glide non-marring, so it is engineered to roll on solid surface without marking, which protects finished faces beside the cut line.
This round under router bit is described as useful for onsite cutting where a conventional round-over cannot be used, supporting field shaping of bull-nose edges on installed or heavy tops.
This router bit undercut design from Amana Tool, identified as manufacturer part number 57140, offers a round under profile, 2-5/8 inch diameter, 1/2 inch shank, and Ultra-Glide Delrin sleeved ball bearing guide, which together support efficient solid surface edge work. When a full 180 degree bull-nose on 1/2 inch to 2 inch stock is part of the spec, this solid surface router bit aligns with that requirement while avoiding flipping heavy tops. For solid surface fabrication or onsite adjustment where guided bull-nose routing is needed, this bit provides defined geometry for repeatable results.