Shelf Slide Spacer with Locating Pin, White

Shelf Slide Spacer With Locating Pin For Face Frames

Shelf Slide Spacer with Locating Pin is a Grass America component designed to adapt specified Grass GF-6020, GF-6034, GF-6035, GF-6036, GF6600, and GF-6620 series slides for shelf use, so a separate cabinet-side build-out is not required when setting up sliding shelves. This spacer bracket converts the drawer slide into a shelf slide by projecting the slide 1 inch (25.4mm) off the cabinet side, which positions the slide to clear a 25mm (1 inch) face frame in typical cabinet construction. The white spacer works in face frame applications where the cabinet side is recessed behind the frame, so the installer can run the slide straight without blocking material. The neutral 6195 spacer keeps the working geometry of the Grass slide series while shifting it out to the proper plane for shelf movement.

Key Spacer Details For Grass Slide Projects

• This Grass America spacer bracket is specified for GF-6020, GF-6034, GF-6035, GF-6036, GF6600, and GF-6620 series slides, so installers can match it directly to these slide families when planning shelf slide layouts.
• The spacer bracket allows the drawer slide to be used as a shelf slide, which lets the same Grass slide hardware carry a pull-out shelf instead of a drawer where that layout better serves the cabinet design.
• The spacer eliminates the need to build out the cabinet sides, so shop time spent ripping and fastening blocking material can be removed from the job when retrofitting or building face frame cabinetry for pull-out shelves.
• The white spacer will clear a 25mm (1 inch) face frame, so the slide can travel in line with the shelf without the frame rubbing or binding against the moving member.
• The 1 inch (25.4mm) projection from the cabinet side sets the slide consistently in the same offset from the side panel, which simplifies repeating the same shelf setback across multiple cabinet openings.
• The locating pin on the spacer keeps the cabinet drawer slide member on the center line with 32mm line boring, so the spacer aligns to standard system holes and keeps hardware positioned on the drilling grid.

Face Frame Shelf Slide Spacer Installation Use

This Grass America spacer is used for face frame applications where the cabinet side is behind the frame by about 25mm, so the installer can mount GF-6020, GF-6034, GF-6035, GF-6036, GF6600, or GF-6620 series slides on the spacer instead of fabricating wood build-outs. The 1 inch (25.4mm) projection from the cabinet side moves the slide member into a plane that clears a 25mm (1 inch) face frame, helping the pull-out shelf run within the frame opening. The locating pin keeps the cabinet drawer slide member centered on a 32mm line boring layout, which ties the spacer to standard system holes so shelf slides follow the same vertical reference across both sides.

Using This Grass Spacer In Cabinet Projects

Where This Shelf Slide Spacer Fits Best

This 6195 spacer with pin 25mm neutral is applied in cabinets using GF-6020, GF-6034, GF-6035, GF-6036, GF6600, or GF-6620 series slides where a 25mm (1 inch) face frame stands proud of the cabinet sides. In those installations, the cabinet side sits back from the front frame, and the 1 inch (25.4mm) projection from the cabinet side moves the slide hardware forward into the same plane as the frame opening so a shelf can travel freely. Because the spacer is used for face frame applications, it suits kitchens, baths, or built-ins using framed construction where converting a standard Grass drawer slide into a shelf slide keeps hardware consistent across drawers and pull-out shelves. The locating pin ties the spacer to the 32mm line boring center line, so it fits layouts built on system drilling in commercial or shop environments.

How Spacer Design Supports Consistent Shelf Alignment

The spacer bracket allows the drawer slide to be used as a shelf slide, so an installer can take a Grass GF-6020, GF-6034, GF-6035, GF-6036, GF6600, or GF-6620 series slide and use this same runner geometry under a shelf without changing to a different slide type. The 1 inch (25.4mm) projection from the cabinet side sets a fixed offset, which means every shelf slide anchored to this spacer sits at the same distance from the side panel, helping rows of pull-out shelves line up. Clearing a 25mm (1 inch) face frame keeps the moving shelf member from contacting the frame edge, reducing the chance of side rub where the frame meets the shelf hardware. By keeping the cabinet drawer slide member on center line with 32mm line boring, the locating pin holds the hardware on the drilling grid so left and right sides track evenly, which supports smooth movement in system-built cabinets.

Common Questions About This Grass Spacer

Selecting This Spacer For Grass Shelf Slides

This Grass America Shelf Slide Spacer with Locating Pin is specified for GF-6020, GF-6034, GF-6035, GF-6036, GF6600, and GF-6620 series slides, so it suits projects using these runners in face frame applications. The 1 inch (25.4mm) projection clears a 25mm (1 inch) face frame, and the locating pin holds the cabinet drawer slide member on center line with 32mm line boring, giving a clear fit path when laying out pull-out shelves around framed fronts.