
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Shaker wood pegs birch 3-1/2 start as standard birch shaker pegs with a 3-1/2 inch overall length, giving you a predictable projection that keeps hanging items clear of the wall while staying compact for tight runs. The 7/8 inch diameter head provides a broad bearing surface so coats, towels, or shop aprons rest on wood instead of cutting into fabric, which supports long-term use on repeated hang points. A 1/2 inch diameter by 5/8 inch tenon is built into each peg, creating a defined mounting section that fits a corresponding 1/2 inch hole depth for a secure glue joint in rails or boards. The birch material works well anywhere a paint-grade or light wood peg is desired, so trim carpenters and cabinet shops can match other birch components in a project.
The 1/2 inch diameter tenon on this standard birch shaker peg sets the drilling requirement for mounting rails, so jigs can be built around a single bit size for repeat runs. With a 5/8 inch long tenon, the peg can be seated solidly into common rail thicknesses while preserving material around the bore, which is useful on narrower moldings. The 3-1/2 inch overall length, measured from the back of the tenon to the front of the head, defines the final reach from the face of the rail, helping you size clearance for doors, walls, or adjacent trim.
These wood pegs decorative hardware pieces sit in the Decorative Hardware & Moldings and Wood Pegs product class, so they are suited to projects where a visible, functional peg becomes part of the trim design. The standard birch shaker peg construction supports painted or clear-finished rails wherever a birch substrate is preferred, such as matching birch cabinets or built-in shelving. With a 3-1/2 inch overall length and 7/8 inch diameter head, these pegs are sized for typical wall-mounted rails, closet components, or shop boards where items need a defined hanging point. The 1/2 inch diameter by 5/8 inch tenon is well matched to mounting into wood rails drilled with 1/2 inch bits, giving furniture makers and finish carpenters a straightforward way to add hanging capacity to boards or moldings.
The SBSP1 shaker peg part number identifies a shaker peg, 3-1/2 inch birch format, so production runs can stay consistent across projects that call for the same look and projection. The 1/2 inch diameter tenon concentrates the load into a defined mounting cylinder, which simplifies glue area calculations when planning peg spacing on rails. A 5/8 inch tenon length means the loaded section sits well inside the board, helping the peg resist leverage from hanging items during daily use. The 7/8 inch diameter head offers a predictable visual footprint on the face of the rail, which helps designers line up pegs with other decorative elements in a room. Being categorized as Wood Pegs also streamlines reordering for shops that keep common shaker peg sizes in inventory for repeated cabinetry and trim jobs.
The SBSP1 shaker peg has a 3-1/2 inch overall length, a 7/8 inch diameter head, and a 1/2 inch diameter by 5/8 inch tenon, which defines drilling and layout for mounting.
The 1/2 inch diameter tenon means mounting boards need 1/2 inch bores, allowing installers to use one bit size and jigs for consistent spacing along rails or panels.
The 3-1/2 inch overall length sets a moderate projection that suits wall rails and cabinet interiors, giving hanging clearance without extending excessively into walkways.
The 7/8 inch diameter head provides a broad support area, helping hanging items rest on wood rather than a narrow point, which is useful for garments or shop gear.
These pegs are described as standard birch shaker pegs, so the material matches birch components where a consistent species is desired in decorative hardware runs.
Being in Decorative Hardware & Moldings and Wood Pegs groups these pegs with trim-oriented parts, simplifying product selection for projects needing visible peg details.
The standard birch shaker peg SBSP1 combines a 3-1/2 inch overall length, 7/8 inch diameter head, and 1/2 inch diameter by 5/8 inch tenon, giving installers a clearly defined size for repeat drilling, spacing, and visual layout. For wall rails, cabinet interiors, or trim boards that call for Wood Pegs in birch, this format from Wurth Baer Supply aligns well with decorative hardware and moldings work where consistent dimensions streamline production.
Sold In: 100 Each