Shaker wood pegs birch 3-1/2 give you a consistent, standard birch shaker peg that works well wherever a traditional peg is needed. The peg is identified by manufacturer part HP1BIR from Smith Wood Products, Ltd., so shops can match this exact style across jobs. The overall length of 3-1/2 inches gives enough projection from the mounting surface for typical hanging needs while keeping the peg compact on face frames or boards. A 7/8 inch diameter head creates a broad contact surface, which helps spread load on hanging points. The tenon is 1/2 inch in diameter and 5/8 inch long, giving a defined mounting portion that fits a properly sized hole and helps keep alignment consistent from peg to peg. As part of Wurth Baer Supply decorative hardware and moldings wood pegs offering, this design suits repetitive production work.
This standard birch shaker peg uses a 1/2 inch diameter tenon that is 5/8 inch long, so drilling operations can center on a 1/2 inch bit for the receiving holes. The defined tenon portion separates the mounting segment from the exposed peg, which makes it easier to gauge insertion depth against a stop or layout line. With the overall length of 3-1/2 inches, installers can plan board or rail thickness so that the tenon sits fully inside the workpiece while the remaining length projects outward for hanging. The 7/8 inch diameter head size also helps in planning spacing between pegs, because the head diameter sets the minimum clear distance to keep adjacent heads from appearing crowded.
The standard birch shaker peg format places this part in the decorative hardware and moldings wood pegs class, which fits projects that rely on multiple, evenly spaced pegs along a board, stile, or rail. With an overall length of 3-1/2 inches, the peg suits layouts where a moderate projection is preferred over very short stubs, such as along mudroom boards, workshop walls, or utility runs that benefit from consistent peg lines. The 7/8 inch diameter head coordinates visually with the body of the peg, giving a defined profile that reads as a classic shaker style element. Because the peg is produced under the HP1BIR designation by Smith Wood Products, Ltd., shops can reference that part number on drawings and cut lists for repeat orders.
The 1/2 inch diameter by 5/8 inch long tenon is central to repeatable installation because it defines the exact drilling and seating zone at each peg location. Using the same 1/2 inch tenon dimension across all HP1BIR pegs means jigs and drilling setups can remain unchanged during a run, which helps maintain alignment from first to last hole. The 5/8 inch tenon length also supports layout planning, since the depth of the blind hole can be matched closely to that length to control how far the base of the peg sits into the workpiece. The 7/8 inch head diameter combines with the 3-1/2 inch overall length to give a balanced proportion, which helps installed rows of pegs look uniform when viewed along a hallway, cabinet run, or shop fixture. As a standard birch shaker peg, the consistent geometry simplifies drawings, templates, and production notes.
The HP1BIR shaker peg has a 3-1/2 inch overall length, a 7/8 inch diameter head, and a tenon that is 1/2 inch in diameter by 5/8 inch long, which defines drilling and projection.
The shaker peg tenon is 1/2 inch in diameter, so receiving holes can be bored to that same nominal size, which supports consistent fits when installing multiple pegs in a row.
The 3-1/2 inch overall length sets how far the peg projects from the mounting surface, which helps determine rail thickness and spacing from adjacent walls, doors, or trim.
The peg head diameter is 7/8 inch, which gives a broad bearing surface for hanging and also guides spacing between adjacent pegs for a uniform visual rhythm.
The tenon length of 5/8 inch provides a defined engagement depth in the hole, which allows installers to match hole depth to that value for consistent seating of each peg.
These pegs are classified as wood pegs in the decorative hardware and moldings category, which aligns them with other wood components used in cabinetry and woodworking.
The HP1BIR standard birch shaker peg from Smith Wood Products, Ltd. combines a 3-1/2 inch overall length, 7/8 inch diameter head, and 1/2 inch by 5/8 inch tenon, giving shops fixed, repeatable dimensions for drilling and layout. Using this defined shaker wood peg format across a run allows drawings, jigs, and boring setups to reference the same measurements on every job. For projects that call for traditional wood pegs within decorative hardware and moldings work, these birch shaker pegs provide a stable geometry to build around in both one-off and production applications.
Sold In: 500 Each