1-3/8" x 1/4" Radius Double Roman Ogee Router Bit, 2-Flute, 1/2" Shank

Double Roman Ogee Router Bit For Detailed Edges

double roman ogee router bit from Amana Tool cuts a double Roman ogee profile so cabinetmakers and woodworkers can add a consistent decorative edge to workpieces. The bit has the cove coming off the bearing, producing the reverse of the classical cove and bead, which shapes a distinctive profile in one pass and avoids extra setup steps. The radius of cove and bead are identical, so the profile is balanced and repeats cleanly along long edges. As an edgeforming router bit in the Amana Tool line, it fits into jobs where a shaped, finished edge is needed directly off the router table or router base.

Key Edgeforming Details That Support Your Work

• The diameter (D) is 1-3/8 inch, so the profile covers a wide enough area to define the edge clearly in a single pass, which saves time when running multiple cabinet parts or trim boards.
• The radius (R) is 1/4 inch, so both the cove and bead portions share the same curve, which keeps the Roman ogee profile visually even and simplifies layout when matching edges around a project.
• The cutting height (B) is 7/8 inch, so the bit can form the full double Roman ogee over that height, which helps when you are working on standard door rails, stiles, or shelf edges that fall within that dimension.
• The shank (d) is 1/2 inch, so the bit fits routers that accept a 1/2 inch shank, which provides a solid grip in the collet during edgeforming work on thicker or longer stock.
• The overall length (L) is 2-5/8 inch, so the bit has enough length to seat securely in the collet while exposing the full 7/8 inch cutting height, which supports stable cuts on router tables or hand held setups.

Installation And Router Setup For This Bit

This 1/3-8 inch x 1/4 inch radius double Roman ogee router bit has a 1/2 inch shank, so it installs in routers designed for 1/2 inch shank tooling, giving a firm hold in the collet. The bit can be used in either hand held or table mounted routers, so it adapts to site work or shop production depending on how you run your edgeforming operations. With its cutting height of 7/8 inch and overall length of 2-5/8 inch, it positions so the full profile is available while maintaining adequate shank engagement in the collet, helping keep the cut stable during routing passes.

Using This Roman Ogee Bit In Real Projects

Where The Roman Ogee Profile Works Best

This router bit is described as 1-3/8 inch x 1/4 inch radius double Roman ogee, so it is built specifically for edgeforming tasks where a Roman ogee profile is required on cabinet parts, furniture components, or decorative trim. The cove coming off the bearing produces the reverse of the classical cove and bead, so the shape suits projects that call for that distinct reverse profile on visible edges, such as shelf fronts or face frames. Because the radius of cove and bead are identical, the edge looks balanced across doors and panels, which helps maintain a consistent appearance across multiple parts in a job. The ability to use it in either hand held or table mounted routers means the same bit can support shop production runs on a table and jobsite adjustments with a portable router.

Profile Control For Repeatable Routing Results

The 1-3/8 inch diameter gives this Roman ogee profile enough reach to form a full decorative edge in one pass, which reduces the chance of mismatch between passes and supports more repeatable results when batching parts. The 1/4 inch radius applied equally to the cove and bead helps control how aggressively the profile changes direction, which is important when you want a defined Roman ogee without overly sharp transitions that could slow down sanding. With a cutting height of 7/8 inch, the bit defines a tall enough profile to stand out on thicker stock while still working well on common cabinet components, which keeps tooling consistent across a range of parts. The 1/2 inch shank supports stable mounting in compatible routers, which helps the bit track smoothly along bearings and guides as you form the reverse classical cove and bead on repeated cuts.

Practical Questions About This Router Bit

Select This Bit For Consistent Roman Ogee Edges

The Amana Tool 1-3/8 inch x 1/4 inch radius double Roman ogee router bit, part number 49214, provides a defined reverse classical cove and bead profile for cabinet and furniture edges. With a 1/2 inch shank, 7/8 inch cutting height, and 2-5/8 inch overall length, it is built to run in routers that accept 1/2 inch shank bits while exposing the full profile. Using this edgeforming router bit in either hand held or table mounted routers helps standardize the Roman ogee detail across your projects using one consistent tool.