Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune Tallman S-Type pull down closet rod is a pull-down unit designed for installation on the side wall of a closet or wardrobe, so the hanging section can swing down to a reachable position in tall storage. The pull-down action brings garments forward and lower while the unit stays fixed to the closet side, which helps use vertical space efficiently in taller cabinets. The unit has an overall height of 29-5/8 inches, giving a defined mounting span that helps plan hole locations and clearances against shelves or cabinet tops. From the centerline of the unit, it projects 24-1/2 inches when pulled forward, which sets how far the hanger pipe moves into the aisle and helps coordinate with door swing or adjacent cabinetry. The hanger pipe length is 795 mm, or 31-3/8 inches, providing a continuous hanging run for clothing within that width.
This pull-down is the right hand model, so it is intended for mounting on the right side wall of a closet or wardrobe where that orientation best suits door swing and user reach. The published weight capacity of 17.6 lb provides a clear loading guideline, which supports planning how many typical garments or hangers can be placed on the 31-3/8 inch hanger pipe. Because the unit projects 24-1/2 inches from the centerline, the swing path and final position of the rod can be laid out against floor and doorway conditions, helping avoid interference with trim or adjacent casework. The overall height of 29-5/8 inches ties the upper and lower mounting points together, which aids consistent drilling and anchoring along the side panel during installation.
This pull-down is designed for installation on the side wall of a closet or wardrobe, so it works in tall enclosures where vertical space is available but direct reach is limited. The 29-5/8 inch overall height suits full-height or mid-height cabinets that can dedicate that span for the mechanism. With a 31-3/8 inch hanger pipe length, the unit serves sections roughly that wide, making it appropriate for narrower closet bays or subdivided wardrobe compartments. The 24-1/2 inch projection from the centerline sets the forward reach of the clothes when pulled down, which works in closets that offer at least that depth in front of the side panel. Two models being available, one for right side and one for left side mounting, allows selection of this right hand TAS-800R/G unit where the right wall is the logical support side. The gray version described as CLOSET PULL-DOWN,RH GRAY can visually coordinate with other gray interior fittings where a neutral tone is preferred.
The pull down has soft-close features that prevent the rod from popping back up quickly, so the return motion is damped and the hanger pipe does not spring upward if released before fully raised. This controlled action supports smoother handling when the rod is moved frequently during daily use. The 17.6 lb weight capacity sets the functional limit of the mechanism, helping the internal components operate within their intended range under typical garment loads. By projecting 24-1/2 inches from the centerline, the lever geometry keeps the clothes within a predictable envelope, which assists in aligning the rod with doors and adjacent closet hardware. The 31-3/8 inch hanger pipe length creates a consistent hanging surface, so hangers track along a straight run without abrupt breaks. Identified by manufacturer part TAS-800R/G and described as a pull-down for side wall mounting, the unit fits into organized closet planning where specific part numbers are matched to right side positions.
The TAS-800R/G pull-down is designed for installation on the side wall of a closet or wardrobe, so the mechanism mounts vertically along one side panel.
The Sugatsune Tallman S-Type pull down closet rod has an overall height of 29-5/8 inches, which defines the vertical space needed on the side wall.
The TAS-800R/G projects 24-1/2 inches from the centerline of the unit, setting how far the hanger pipe moves forward into the room.
The pull down closet rod has a hanger pipe length of 795 mm, or 31-3/8 inches, providing a straight hanging span across that width.
The TAS-800R/G pull down closet rod has a weight capacity of 17.6 lb, which defines the garment load suitable for this mechanism.
The pull down has soft-close features that prevent the rod from popping back up quickly, so the return motion is moderated during everyday use.
This Sugatsune Tallman S-Type pull down closet rod, part TAS-800R/G, is a right hand model designed for side wall mounting in closets or wardrobes that match its 29-5/8 inch height and 31-3/8 inch hanger width. The 24-1/2 inch projection and 17.6 lb weight capacity define how the unit operates and how it will handle garment loads in service. The soft-close feature manages the return of the rod, providing a controlled motion in daily use. For closet layouts that call for a right side pull-down rod with these measured dimensions and performance characteristics, this model offers a defined set of working parameters to build around.
Sold In: 1 Each
