9773 Magnetic Catch, Tan

9773 Magnetic Catch Tan For Cabinet Control

9773 magnetic catch tan is a magnetic catch from Amerock Corporation that secures doors or panels using a compact magnet housing and matching strike plate, which helps control door movement on cabinets and similar woodworking projects. The magnet housing measures 1/2 inch high by 1-1/8 inch deep by 2 inches long, so it fits in tight mounting spaces while still offering a stable footprint against the mounting surface. The strike plate measures 3/4 inch high by 1-1/8 inch long, giving a defined landing area that helps the door register consistently against the catch. As a magnetic catch in the catches class, it provides a simple, mechanical way to keep doors closed without a keyed lock, which is useful wherever straightforward door retention is needed on casework or furniture.

Key Magnetic Catch Details For Daily Work

• The magnet housing size of 1/2 inch high by 1-1/8 inch deep by 2 inches long keeps the catch low-profile, which helps when mounting behind face frames or in shallow cabinet interiors where projection must stay minimal.
• The 3/4 inch high by 1-1/8 inch long strike plate creates a defined contact area, which supports repeatable door closing alignment when the door edge or rail meets the plate during regular use.
• The product is identified as Amerock Corporation part CM9773PT, so installers can match it to drawings or reorder confidently when standardizing hardware across multiple cabinets or job phases.
• The tan color identified in the product name allows the catch to blend with many light-toned cabinet interiors, which helps keep visible hardware distraction low when the door is open.

Mounting Dimensions That Guide Catch Placement

The magnet housing dimensions of 1/2 inch high by 1-1/8 inch deep by 2 inches long give clear boundaries for laying out screw locations on rails, stiles, or cabinet tops, which supports accurate positioning before drilling pilot holes. The strike plate size of 3/4 inch high by 1-1/8 inch long defines the available landing area on the door, which helps determine how much adjustment room exists during alignment so the plate and magnet face meet squarely. Because both parts share the 1-1/8 inch dimension, their faces align over a consistent width, which simplifies marking centerlines between cabinet and door edges during installation.

Using The Amerock CM9773PT Catch In Projects

Where This Magnetic Catch Typically Fits

As a magnetic catch in the locks and latches category, the Amerock Corporation CM9773PT is suited for cabinet doors or small access panels where a positive close is needed without a lock cylinder, which is common in residential and light commercial casework. The 1/2 inch housing height keeps the catch compact, so it fits on narrow face-frame rails or slim cabinet tops without projecting far into the interior, which is helpful when storage space near the opening is important. The 1-1/8 inch housing depth and 2 inch length provide a rectangular footprint that works on flat mounting surfaces such as cabinet frames, fixed shelves, or jambs, which supports consistent placement across a run of cabinets. The 3/4 inch by 1-1/8 inch strike plate size fits well on standard cabinet door rails or stiles, so it can be positioned near the edge without overwhelming narrow framing members.

Why These Dimensions Support Repeatable Results

The shared 1-1/8 inch dimension between magnet housing depth and strike plate length means the mating faces line up over an equal span, which simplifies layout when transferring measurements from cabinet to door for a uniform close across multiple openings. The 2 inch housing length gives additional screw spread compared to very small catches, which supports a more secure mount on wood surfaces subject to repeated opening and closing cycles. The 3/4 inch height of the strike plate leaves margin above and below the magnet contact zone on typical door frames, which offers some flexibility during minor door adjustments while still maintaining solid metal-to-magnet engagement. Because this is a magnetic catch rather than a spring latch, the closing action depends on face-to-face contact between the housing and the plate, so these defined sizes help installers align components efficiently and reduce the need for rework.

Common Questions About The CM9773PT Magnetic Catch

Selecting This Magnetic Catch For Your Project

The 9773 magnetic catch tan from Amerock Corporation combines a 1/2 inch by 1-1/8 inch by 2 inch magnet housing with a 3/4 inch by 1-1/8 inch strike plate, giving clear, repeatable dimensions for cabinet and panel layouts. The catches classification and defined housing and plate sizes support installers and woodworkers who want straightforward magnetic closure on doors or small access panels using a known Amerock CM9773PT part. For projects that call for a compact magnetic catch with these specific dimensions and tan finish, this unit offers a clearly identified option ready to match into hardware schedules and standardize across jobs.